169-ITPO(4)E-E/2023-24/20

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing of following sizes of steel conduit along with accessories in surface/ recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm. FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Supplying and fixing sutable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required Make: Schindler, ABB, L&T.

63 A, 10 KA, TPMCCB

100 A, 16 KA,TPMCCB

200A, 25 KA, TPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 Way, Double door

12 Way, Double door

supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1 mm thick saddle)

Above 35 sq. mm. And upto 95 sq. mm. (clampled with 25x3mm MS flat clamp)

Above 95 sq. mm. and upto 185 sq. mm. (clampled with 25/40x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3 X 10 sq. mm. (22mm)

3½ X 25 sq. mm. (28mm)

3½ X 50 sq. mm. (35mm)

3½ X 70 sq. mm. (38mm)

3½ X 120 sq. mm. (45mm)

Supplying of one number PVC insulated and PVC sheathed/ XPLE, Aluminium comnductor power cable of 1.1 KV garde of following sizes on surface /recess etc as required Make: Polycab, Plaza, Havells, KEI.

3X10 sq. mm cable

3½ X 25 sq. mm cable

3.5 x 50 SQ mm cable

3.5 x 70 SQ mm cable

3½ X 120 sq. mm cable

Supply and fixing of ceiling fan of 1200mm, 220v, 50 HZ supply, white colour, corrosion resistant high performance fan with powder coated dynamically balanced blades, 100% copper winding motor, double ball bearing, stability and silent operation along with necessary accessories inclusive of providing upto 4 feet extra down rod with 1.5 sq. mm. FRLS insulated copper conductor single core cable and fixing the hook after making the hole in the ceiling and making the same good as required complete with testing and commissioning etc. Make: Crompton, Usha, Havells

SITC of 2 x 20 Watt ultra bright LED tubelight (double side connection) complete with batten with very high efficiency suited for installation in existing tubelight G13 lamp holders to give glare free light with regal batten for LED tube box type on ceiling/ wall including connection with 1.5 sqmm FRLS PVC insulated copper conductor single core cale and earthing etc as required. Make: Wipro, Crompton, Havells.

Fabrication, installation, testing and commissioning fully compartmentalized powder coated floor/ wall mounted feeder pillar 1600mmX1275mmX300mm deep suitable for use on 415V, 50Hz AC supply, CPRI approved having 2mm thick CRCA sheet, dust and vermin proof with ventilation louvers, sectionalised detachable gland plates, totally enclosed compartmentalised front operated cubical type with 4 strip aluminium bus bar of 250Amp capacity with 2 termination points for earthing strip, din bar, MV danger notice plate, suitable gaskets, protection, interconnections, cable alleys, panel board on suitable MS iron frame made out of 50mm X 50mm X 6mm thick and along to be embeddded in cement concrete foundation 35 cm above ground level suitable for incorporating 8 switch gears, timer, digital multifunction meter (for measuring voltage and ampere), 3 nos. LED indicating lamp with toggle switch on/off indication, locking arrangement, earthing studs, painting etc. as required.

SITC of 1.5 TR capacity of 5 star rating, split inverter type AC, 230 V 50 Hz AC supply with copper coil along withremote control i/c referigerant, referigerant pipe upto 3 metre length and P/F MS stand for condenser unit suitable size connection etc. as required. Make: Voltas, Hitachi, Carrier, Daikin

SITC of soft drown copper tube in excess of suitable length provided by OEM of following size including jointing with existing copper tub AC machine by brazing etc. i/c insulation of pipe with suitable material and of adequate thickness etc. as required.

supplying and fixing hard drawn 25 mm dia PVC pipe on surface for draining of condensed water i/c all accessories complete etc. as required.

NANDI ELECTRICAL WORKS