SPECIAL REPAIR TO OR MD ACCN BLDG NO P-4 AT OLD JAT COLONY AT PATIALA UNDER GE (S) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for cement plastering 10mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plastering 5mm thick in cement mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plastering 15mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair without using extra cement incl fixing of chicken wire mesh as and where directed complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed

Supply only chicken wire mesh of dia 22 gauge and size of aperture not less than 20x20 mm complete all as specified and directed

Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

M&L for Applying two coats of oil bound distemper white or tinted over a coat of primer on walls incl one coat of primer over & incl preparation of old/New surface of wall and filling of small holes with wall care putty complete all as specified and directed.

Material and Labour for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Touch-up by using wall putty with silicon additives followed by application of one coat of SmartCare waterproof primer on walls and Chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives having anti-algal and Dust pickup resistance properties, Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed.

Applying 02 coats of exterior emulsion weather proof paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 10 sq.m/1.43litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.

M&L for preparation of new/old plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and apply of rust remover cum passivation by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions and complete all as specified and directed. Note : The application of rust removal shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Make/Product: Sika Rustoff 100 or equivalent make mentioned hereinafter.

Supply and apply Cementations Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by applying the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that specified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer's instructions and all as specified. Note : The application of Cementations Coating for Corrosion Protection shall be got done through the authorised applicator of manufacturer of membrane only complete all as specified and directed.

M&L for providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including preparation of surface by chipping and thoroughly cleaning of surface complete what ever required and as per direction.Consumption: 0.5 kg/m2. complete all as per manufacturer's instructions and all as specified. Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C., complete all as specified and directed. Note : The application of Epoxy Bonding Primer shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

M&L for supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in 25 mm thickness.Yield: approx. 0.84 ltr/kg.System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79.Consumption of 2.1 Kg/Sqm/mm, complete all as specified and directed. Note : The application of Polymer repair Mortar shall be got done through the authorised applicator of manufacturer of membrane only

M&L for Taking down cement plaster from brick work or RCC surface and proper cleaning the surace with water and making efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface and including finally apply 15 mm thick plastering cement mortar in 1.3 with mixing of (URP 301) over treated surfaces and Applying 3mm thick wall care putty applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for Taking down cement plaster from brick work or RCC surface and proper cleaning the surace with water and making efflorescence treatment by applying two layer of fastflex Dr. fixit over brick surface and including finally apply 10 mm thick plastering cement mortar in 1.6 with mixing of (URP 301) over treated surfaces and Applying 3mm thick wall care putty applying Two or more coats of oil bound distamper white or tinted with putty over a coat of primer on walls incl one coat of primer over & incl preparation of New surface of wall complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door Frame/Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F of factory made double extruded/ rebated WPC (Wood Polymer Composite) solid door Frame/Chowkhat of size 150 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specifed and directed. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing along with following aluminium mongaries for fixing of door, complete all as specified and directed. (a) Stainless Steel (304 Grade) Butt Hinges 150mm - 3 nos per leaf (b) Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Aluminium Handles 150 mm - 2 nos per leaf

S & F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S & F of factory made double extruded/ rebated WPC (Wood Polymer Composite) solid decorative type plain wiremesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. For fixing stainless steel 304 Grade wire cloth (wire dia. 0.56mm) and Expanded aluminium mesh, wire dia 1.20 mm thickness and mesh aperture size 38x20mm (LWxSW) combinly panel panel area of door excpet stiles and rail to be panelled with mesh wih self tapping round headed screws at requried distance,scres and edges covered with feathered pvc edge beading all round of mesh and WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including fixing like welding etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for reinforced cement concrete nominal mix 1:1½:3 Type B0 1:2:4 (12.5mm graded) in slabs supported on walls,beams and columns in floors, roofs, landings,balconies, canopies,deck slabs and in shelves and the like. complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs,floor slabs,landing and similar work not exceeding 200mm thick (Horizontal or slopping) complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers ,lintels, cantilevers,shelves including supports overhangs etc. also splays between floors and beams etc complete all as specified and directed.

M&L for fixing in position Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for fixing in position Mild steel bars , but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Demolition of cement concrete un-reinforced of any description and in any position complete all as specified and directed.

M&L for plain cement concrete 1:5:10 mix, type E-2 (using 40mm graded stone aggregate) as in filling of sunken portion complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, trowelled to even and smooth finish without using extra cement with WPC paid and measered seperately, complete all as specified and directed.

M&L for providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.00 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer confirming to IS-3384 or as described at para 11.44.5 of MES Schedule Part-I @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm thick 3 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions complete all as specified and directed. Note : The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sunken floor complete as specified and directed.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed.

Dismentling mud phuska on roof and removing debris away from site complete all as specified and directed.

M&L for scrapping surfaces of roof by wire brushing &cleaning removing all loose dirt and cleaning and washing down the surfaces with water complete all as specified and directed.

M&L for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 12.5mm graded stone aggregate) as in roof kerbs, mud stops,steps small sumps and like items slightly rounded or chamfered on the edges complete all as specified and directed.

M&L for PCC 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 45 mm to maintain a slope of 1:100 complete all as specified and directed.

M & L 22 mm thick PCC tiles laid over cement mortar 1:3 mixed with water proofing compound and joints grouted flush in cement mortar (1:3) complete all as specified and directed. Note : WPC will be measured and paid for separately.

M&L for providing 25 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and directed.

S&F for galvanised mild steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F for 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fancy type, stops fixed with ss screws etc complete all as specified and directed. Note : For the purpose of measurement and payment running length of curtain rod only shall be considered.

Supply and fixed in repair brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed.

S&F stainless steel sink with drainage board, 1.00 mm thick, glossy finish, for kitchen with plugs washers and waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x355x185mm/430x355x200 with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed.

M&L for PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in sub base of floors or mass concrete etc complete all as specified and directed.

M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite incl rounding exposed edges incl grinding to achieve granite finish complete all as specified and directed.

M&L for Baroda green marble, 18-20 mm thick, (table rubbed and polished) machine cut, laid over & including 15 mm thick (average thickness) cement mortar (1:3) screed and bedded, jointed with grey cement slurry & pointed with grout of matching shade including as in steps and landing, cooking platform shelves, RCC counters, window cills & similar situations in one piece of full length incl rounding exposed edges incl grinding to achieve granite finish incl making two no of grooves of size 3mmx3mm as in steps complete all as specified and directed.

M&L for baroda green marble, 18-20 mm thick, (table rubbed and polished) machine cut,, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab as in skirting and dados complete all as specified and directed.

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-2 1:2:4 (12.5mm graded aggregate) as in floor or similar works complete all as specified and directed.

M&L for roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over and including 15 mm thick rendering in cement mortar 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting or dados etc over and including 10 mm thick rendering in cement mortar 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 x 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Dado should be flushed with the wall plastering.

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors, steps, cills etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Supply & fixed in repair overhead shower125mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing a complete in all respect complete all as specified and directed.

S&F in repair 15 mm dia chromium plated long body Bib Tap cast copper alloy fancy type CP with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair wall mixer telephonic assembly, brass chromium plated, comprising of centre outlet tap, double inlet for hot and cold water with connecting legs and wall flange fancy type suitable for 15 mm tubing fixed in position complete all as specified and directed.

S&F vitreous china premium/1st quality wall hung wash basin half pedestal, white, flat back, min. size 500x400 mm, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread incl pvc pipe 40mm upto floor trap incl pvc connection, and also incl CP brass wash basin mixer and complete in all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete all as specified and directed.

S&F in repair double lever Sink mixer with swinging spout with connecting legs and wall flanges, wall mounted fancy type chromium plated cast copper alloy screwed down high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F Angular Stop Cock, CP, fancy type with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F in repairs Vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) with long arm S or P trap so that joint is avoided white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc, and incl all necessary accessories like rag bolts/gel gasket, spray jet etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valve less symphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F stainless steel grating 150x150 mm size square shaped for floor trap fixed in position complete all as specified and directed.

S&F stainless steel grating 100 mm size round shaped with cockroach trap for floor trap fixed in position complete all as specified and directed.

M&L for providing and laying 75mm dia UPVC soil, waste and vent pipes (SCH-80) in any length with or without ears, with cement joints, fixed to walls and making necessary connections complete all as specified including taking down of existing unserviceable CI pipe, complete all as specified and directed.

S&F PVC(SWR) bends (any radius), for 75mm bore pipes, with access doors, complete all as specified and directed.

S&F PVC(SWR) bends (any radius), for 110mm bore pipes, with access doors, complete all as specified and directed.

S&F PVC (SWR) junction double,(double T), equal or unequal with access door for 110 mm bore complete all as specified and directed.

S&F PVC (SWR) junction double,(double T), equal or unequal with access door for 75 mm bore complete all as specified and directed.

M&L for laying 110mm dia UPVC soil, waste and vent pipes in any length with or without ears, with cement joints,fixed to wall and making necessary connections complete all as specified including taking down of existing unserviceable pipe complete all as specified and directed.

M&L for providing and laying 110mm dia UPVC soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors and including making necessary connections complete all as specified including taking down of existing unserviceable pipe complete all as specified and directed.

M&L for fixing in position UPVC floor trap 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) in repair complete all as specified and directed.

S&F PVC bend duck foot or heelrest, radius for 100mm bore pipe, as in repairs, complete all as specified and directed.

S&F PVC nahani trap incl jointing to waste pipe in neat cement 100mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F for PVC cowl of 75mm dia complete all as specified and directed.

S&F for PVC cowl of 110mm dia complete all as specified and directed.

M&L for fixing in position PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cemen type 'P' grating complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.50 Mtr wide and not exceeding 1.50 Mtr in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for concrete bed type D-2 1:4:8 using 40mm stone agg) to 100mm drain pipes of any dia complete all as specified and directed.

Returning and filling incl spreading, levelling, water and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of excavated material n. exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point, complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4section) in cement concrete 1:2:4 mix type B-1smooth finished and reforming benching as required of any size of dia of pipe complete all as specified and directed.

M&L for laying 40mm dia PVC (HDPE) SWR pipes single socketed in any length with rubber ring joints using solvent cement joints, laid in wall,ceiling or in floors and including elbow, tee, socket, bends etc. and making necessary connections complete all as specified including taking down of existing unserviceable pipe complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins,arches,pillars etc complete all as specified and directed.

M&L for fly ash Brick work using modular size bricks with sub class 'B' bricks curved on plan with mean radius not exc 6m with bricks roughly cut to radius or bricks with wedge shaped joints built in cement mortar 1:6 complete all as specified and directed.

M & L Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints filled with polyurethane elastic adhesive/sealan complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate, as in base for PVC tanks, as in base of floors and other similar items complete all as specified and directed.

M & L for Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified.

Taking up or down existing steel tubing and connections 20 mm bore complete all as specified.

Supplying and laying of 20mm outer dia CPVC pipes SDR11 with including all plain & brass CPVC SDR 11 fittings on walls and ceilings or laying in floors complete all as specified and as directed.

M&L for laying of 25mm outer dia CPVC pipes SDR11 with including all plain & brass CPVC SDR 11 fittings on walls and ceilings or laying in floors complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed Conduit(TV/Tele Socket) etc., and making good, cutting not exc 10cm girth and complete all as specified and directed.

S&F PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per manufacture instruction, fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc as in repairs after taking down existing damaged CI rain water pipe complete all as specified and as directed including P or S Tees traps complete all as specified and directed.

S&F CP peg set of 6 hooks and including all accessories like screws etc as recommended by manufacturer and complete fixing in position complete all as specified and directed.

S&F acrylic glass shelf assembly for soap dish and appropriate space for placing other things like tooth brushes comb tooth paste etc and fixed to walls with plug and brass chromium plated screws complete all as specified and directed.

S&F Stainless steel plate rack made out of 1 mm thick stainless steel sheet of size 600x650x250mm complete all as specified and directed.

S&F of MS work of Fe-290(Grade E-165) grade as in frame work for Cooler stand/ railing/ roofs/sheds/chajjas etc and like similar items including welding/fixing with conn plates etc.complete all as specified and directed.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE WPC board ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE WPC board of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen/bed rooms cabinet shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE WPC board of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.

S&F Stainless Stell 304 garde Basket cutlery of size 370x485 mm premium quality complete fixed in position complete all as specified and directed.

S&F Stainless Steel 304 grade wire Basket of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position complete all as specified and directed.

S&F Wardrobe tube/ hanging rod for CB of size 30x15 mm and 0.6 mm thick stainless steel 304 grade rectangular high gloss finish complete fixed in position incl s&f brackets/screws etc all as per complete all as specified and directed.

Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf and incl hook and eye. Note: complete shutter window will be treated as single uit and paid as single unit

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F Factory made Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with minimum weight not less than 1.345 Kgs/Sqm with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all valve less symphonic complete all as specified and directed.

M&L form work to edges of concrete flats, RCC/PCC bands floors roofs and similar works exc 10 cm and not exc 20 cm wide surface finished rough to receive plaster complete all as specified and directed.

M&L for 75 mm thick PCC type D-2, (1:4:8) using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50% red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 graded stone aggregate) as in precast kerb stone jointed with CM 1:4 , rounded or chamfered on edges complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc complete all as specified and as directed.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.iii) Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.

All as per item No 137 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed.

All as per item No 137 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed.

All as per serial item No 137 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed.

M&L for Modular Socket 6A/16A - 2/3 pin 2 module type complete all as specified and directed.

M&L for Modular Socket, 6A - 5 pin 2 module type all as specified and directed.

M&L for Modular switch 1 way 6A, 1module type all as specified and directed.

M&L for Modular switch 1 way 16A, 1 module type all as specified and directed.

Material and labour for Modular Bell push 6A 1 module complete all as specified and directed.

M & L for Fan step regulator, 120W - 2 module complete all as specified and directed.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all as specified and directed.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note: Necessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The DB shall be fiush fixed and making good the disturbed surface shall be part of job at no extra cost.

Supply and fix in replacement of MCB SP up to 6-32 Amp all as specified and directed.

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed.

Supply & fix in replacement of existing unserviceable FTL with new technolgy self blasted LED retrofit tube lamp with thermoplastic body with high lumen 18 w 6500 K suited for installation in existing t5 tube light including necessary electric conection with box type batten complete all as specified and directed.

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 7 to 18 watts for batten fitting, complete all as specified and directed.

Supply and fix inverter type LED Lamp 9 watt complete all as specified and directed.

Material and labour for call bell ding dong AC 230 volt single pole complete all as specified and directed.

Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds of capacity10 Watt complete all as specified and directed.

Supply & fix in LED mirror light with Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt complete all as specified.

M&L for Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Note:- Old u/s C/Fan to be deposited in MES store.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed. Note: Fixing of Exhaust Fan on wall with suitable size anchor bolt , making hole in wall for grouting and making good the disturbed surface including plaster work shall be part of job at no extra cost.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 230 mm sweep with louver complete all as specified and directed. Note: Fixing of Exhaust Fan on wall with suitable size anchor bolt , making hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost.

S&F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast aluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bend to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twin core from ceiling rose to light fittings complete all as specified and directed.

S&F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts VTPN 4 ways (one incoming three phase & four out goings three phase )for MCCB, comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 AMPS AC 415 VOLTS 10 KA IHLGSF0100 =01 NO as incoming complete all as specified and directed. Note :- (i)The DB shall be VTPN series of MDS-LOADKONTAKT (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly with digre of protection IP 54 & PU gasket a machenical perfact IK O9.

Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 25 Sqmm 3 & 1/2 Core complete all as specified and directed.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

M&L for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable complete all as specified and directed. Note: only Punned Sand shall be measured.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I, complete all as specified and directed.

Buttar Construction Co. (BID ID -3451879)

AR CONSTRUCTIONS (BID ID -3444599)

M/S RAJ KUMAR GUPTA (BID ID -3443424)

Arneja Builders (BID ID -3441021)

SWAMI ENGINEERS (BID ID -3448934)