Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC 30 INDUSTRIAL AREA KOKAR RANCHI 834004 JHARKHAND | RANCHI | JHARKHAND | 834004 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹32.2 L+₹6.8 L (27.0%)Rejected-Finance | L2 | Rejected-Finance Quoted rates more than L1 | |
| 3 | L3₹35.1 L+₹9.7 L (38.4%)Rejected-Finance | L3 | Rejected-Finance Quoted rates more than L1 | |
| 4 | L4₹35.3 L+₹9.9 L (39.2%)Rejected-Finance SHANTI KUNJ CHESIRE HOME ROAD BARIATU RANCHI 834009 JHARKHAND | RANCHI | JHARKHAND | 834009 | L4 | Rejected-Finance Quoted rates more than L1 | |
| 5 | L5₹40.1 L+₹14.8 L (58.4%)Rejected-Finance 119 LANE NO 4 DAYA NAND NAGAR LAWRENCE ROAD AMRITSAR PUNJAB 143001 | AMRITSAR | PUNJAB | 143001 | L5 | Rejected-Finance Quoted rates more than L1 |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
3 Nov 2022, 6:00 pmClosed
Major S Rakesh
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
REPAIR/REPLACEMENT OF ELECTRICAL FITTINGS AND FIXTURE INCLUDING REWIRING TO CERTAIN MD ACCN AND REPAIR/MAINT OF STREET LIGHT AND CONNECTED ITEM OF WORK AT NAMKUM AND KHOJATOLI UNDER GE RANCHI
2022_MES_556485_1
8400/1157/E8
Open Tender
Civil Works
Item Rate
180 days
Ranchi
Class D Cat b (i)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹66,000
Yes
13 Dec 2022
8 Oct 2022
5 Nov 2022
9 Oct 2022
3 Nov 2022
22 Oct 2022
Amount
Taking down carefully any type point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for including making good the disturbed portion surface/wall complete all as per specfied and directed.
M&L point wiring with colour coding multistranded copper conductor cable, new PVC insulated (FRLS) and unsheathed size 1.5 sqmm with conceled Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick modular plate incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as per specfied and directed. . (Note- Modular cover plate of any module with all fittings are included in point wiring.) Make-Havells/Anchor/Finolex
All as per item No 2 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5sqmmwire with 1.5sqmm earth wire complete all as per specfied and directed.
All as per item No 2 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmmwire with 1.5sqmm earth wire complete all as per specfied and directed.
All as per item No 2 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.
S&F switch piano flush type/Bell push, 5 Amps, single pole one way complete all as per specfied and directed. (Make : Anchor/Havells/ABB (ISI marked)
S&F socket 5 pins, 6 Amp, flush type piano (multi purpose) complete all as per specfied and directed. (Make : Anchor/Havells/ABB ( ISI marked)
S&F Socket 15 Amps flush type 230 Volts , AC complete all as per specfied and directed. (Make : Anchor/Havells/ABB ( ISI marked)
S&F switch 15 Amps flush type 230 Volts , AC complete all as per specfied and directed. (Make : Anchor/Havells/ABB ( ISI marked)
S&F switch socket combination 5 pins, 6 Amp, flush type piano (multi purpose) complete all as per specfied and directed. (Make : Anchor/Havells/ABB ( ISI marked)
S&F switch Socket combination15 Amps flush type 230 Volts , AC complete all as per specfied and directed..(Make : Anchor/Havells/ABB ( ISI marked)
Supply & fixing switch modular type (ISI marked confirming to IS 3854:1997)), single pole, one way 10 Amp , 240 Volts complete all as specified & directed.
Supply & fixing switch modular type (ISI marked confirming to IS 3854:1997)), single pole, one way 15/16 Amp 240 Volts complete all as specified & directed.
Supply & fixing socket modular type (ISI marked) confirming to IS 1293:2005, single pole, 6 Amps 2 pin/ 3 pin, 240 Volts complete all as specified & directed.
Supply & fixing socket modular type (ISI marked) confirming to IS 1293:2005, single pole, 6/16 Amps twin 3 pin power socket ,240 Volts complete all as specified & directed.
Supply & fixing 5 step fan regulator modular type (ISI marked confirming to IS 3854:1997)), single pole, 240 Volts complete all as specified & directed
Supply & fixing bell push modular type (ISI marked confirming to IS 3854:1997)), single pole, 5/6 Amp , 240 Volts complete all as specified & directed
Supply & fixing 5 step fan regulator single pole, 240 Volts complete all as specified & directed. Make- Anchor/Havells/ABB
M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with new PVC casing caping with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet/modular plate incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as per specfied and directed. Make-Havells/Anchor/Finolex
All as per item No 19 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5sqmmwire with 1.5sqmm earth wire
All as per item No 19 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmmwire with 1.5sqmm earth wire
All as per item No 19 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.
S&F Ding Dong door bell complete all as per specfied and directed. (Make : Anchor/Havells/ABB(ISI marked)
S&F ceiling rose, surface backlite, 65x50mm, three terminals, (Make : Anchor/Havells/ABB ( ISI marked)
Supply and fix angle lamp holder PVC/Polycarbonate base / back suitable for CFL lamp. (Make : Anchor/Havells/ABB ( ISI marked)
S&F LED bulkhead 10W with IP 65 protection 240V Make- Bajaj/Havells /Phillips
S&F LED Mirror Light 10 Watt with diffuser, Decorative type,complete all as specifed & directed. Make :-Crompton /Phillips/ Havells
S&F LED bulb 10 Watt suitable for angle lamp holder base B-22 230V ,complete all as specifed & directed Make :-Crompton/Phillips/ Havells
S&F 20W LED 6000K (4’) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, (Complete Set) all as per specfied and directed. Make : Phillips Havells Crompton
Dismantling and taking down existing unserviceable submain wiring from batten/conduit of any size and making good to disturbed surfaces to match the existing surfaces.
M&L submain wiring with 2X6.0 sqmm + 1X6.0 sqmm earth wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty in concealed conduit including taking down old wiring all accessories complete all as specified and directed. Make- Havells/Finolex/Polycab
Dismantling and taking down existing unserviceable cable of any size and making good to disturbed surfaces to match the existing surfaces.
S & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as per specfied and directed. Make- CCI/Havells/Polycab
S & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as per specfied and directed. Make- CCI/Havells/Polycab
S & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as per specfied and directed. Make- Havells/Finolex/CCI
Taking down unservicable main switches MCB's DB's etc any type and capacity including making good the disturbed surfaces to match the existing .
S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 10 ways complete all as per specfied and directed. Make:-Havells / Legrand / L&T .
All as per item No 37 above but 8 ways
All as per item No 37 above but 4 ways
S&F MCB SPN 32 to 63Amps 415V incl all termnials, fitting etc complete all as per specfied and directed. Make:-Havells / Legrand / L&T .
S&F MCB SP 06 to 40 Amps 415V incl all termnials, fitting etc complete all as per specfied and directed. Make:-Havells / Legrand / L&T .
S&F MCB TPN 40 to 63 Amps 415V incl all termnials, fitting etc. Make:-Havells / Legrand / L&T .
S&F Distribution board 4 way TP&N Double Door are fitted with Bus Bars, Neutral Links, Blanking Plates, Suitable for FP MCCB complete all as per specfied and directed. .Make:-Havells / Legrand / L&T
S&F CRCA sheet metal enclosure double door, outdoor type suitable size including single phase Energy meter Fixed with cable terminals incl 3 nos HDPE gland fixed on pole/wall/panel/where direction by Engr in charge with clamp nuts,bolts, PCC along with S&F new waterproof wooden box etc (Size to fit meter and assy) complete all as per specfied and directed. Make:-Secure / HPL /L&T.
S&F CRCA sheet metal enclosure double door, outdoor type suitable size including three phase Energy meter Fixed with cable terminals incl 3 nos HDPE gland fixed on pole/wall/panel/where direction by Engr in charge with clamp nuts,bolts, PCC along with S&F new waterproof wooden box (Size to fit meter and assy) etc complete all as per specfied and directed. Make:-Secure / HPL /L&T.
Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron earth strip 32x6mm up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 15mm bore with funnel wire mesh and medium grade GI earth wire protection pipe 50mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I. Note :(a)Three photos covering the steps involved in installation with the electrode plate be atttached witht the bills for payments. (b) The item should be connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and directed.
Taking down old burnt electric single phase meter of any type, submitting it to MES Store and S&F CRCA sheet metal enclosure double door, outdoor type suitable size including single phase Energy meter Fixed with cable terminals incl 3 nos HDPE gland fixed on pole/wall/panel/where direction by Engr in charge with clamp nuts,bolts, PCC along with new waterproof wooden box etc complete all as per specfied and directed.. Make:-Indoasian/Havells / HPL / L&T.
S &F of building security light energy conservation LED roadway lighting luminaires 25W based deep drawn aluminium housing in grey finish with clear acrylic and cast alum pipe mounting attachment IP66 protection including security light brackets and Supply & Fixing Bracket made out of GI light grade pipe of 40 mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos MS clamp 50mm x 500 and 04 sets of nuts,bolts and washers painting with two coats of synthetic enamel paint over a red oxide primer complete all as specified & directed. Make: Bajaj/Havells/crompton
Supply & Fixing or Passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 6 sqmm 2 core including brass compression cable gland, terminal lug etc and testing complete all as specefied and as directed. Make:- Havells/Finolex/Polycab
S&F LED bulb 40W 230V on street light pole against replacement of HPSV lamps Make- Havells/Crompton /Phillips
Material & Labour for LT cable two core PVC insulated, PVC sheathed multi stranded Copper conductor size 1.5 Sqmm for security light complete all as per specfied and directed.
M & L GI tubing light grade 20 mm bore for protection of service connection laid in trenches/ walls etc and for protection of connection wire from junction box to light fittings, earth wire complete all as specefied and directed (Note : Necessary clamps, nuts, bolts etc deemed to be included)
S&F in repairs thermo plastic cable Junction box of size 300X200X105mm suitable for Cable IP 65 Protection with metric knockout for cable entry incl MS clamp of size 25x3mm, with aluminium bus bar 200 Amps 3 pole and neutral and MCB SP 16 Amps incl 3 nos HDPE gland fixed on pole with clamp nuts,bolts etc all as directed. Make:Sintex/ Hensal/HPL
Taking down worn out , unserviceable and supply & Fixing Pole street light bracket fabricated out of GI Tubing light grade 40 mm bore bend to the shape as directed and not less then length 1.50 mtr complete with mounting MS clamp of flat iron size 40X5mm of suitable length 02 Nos incl nut bolts etc of suitable size complete all as per specfied and directed.
M&L for GI pipe light grade of size 40mm dia laying in trenches/ under floor/on walls for protection of UG cables all as specified and directed
M&L for removing old paint from surface of steel LT pole by scraping,rubbing and making good surface for painting with two coats of aluminium paint on rusted pealed out surface after cleaning ,marking nos as per direction all complete as per specfied and directed.. Make: ASIAN/Shalimar/Berger
Taking down worn out , old, unserviceable light fitting of any description complete all as per specfied and directed.
S&F in replacement of LED Street light luminaries fittings 60 watt green line a road lighting luminaries with high power LED and unique peanut to ensure uniform light distribution higher spacing between poles and maintenance free system complete all as per specfied and directed.. Make-Crompton/Bajaj/Havells./ Phillips Note:- (i) The contractor shall produce minimum two years warrenty against any manufactures defect/ failure of fitting from the authorised representative / OEM of the make as specified and brought at site. (ii) The efficacy of system is 120 lumne/watt. (iii) The PF should be > 0.90 (iv) The LED street light fittings shall be provided with overload / under load protection with range 180 to 380 volts and inbuilt surge protection device. (v) The contractor / manufacture shall provide on site warranty for carrying out necessary repair / replacement of defective street light fittings. (vi) The LED fitting and driver in fitting shall be of same make.(vii) Street light should be with phase to phase and phase to neutral protection Make- Crompton /Havells/ Phillips
All as per item no 60 above LED street light fitting 45W
S&F LED Post top / Gate light 1x40 watt decorative type, 360° indirect light including fixing with suitable size GI pipe as require on the top of gate pillor, control by two way SP DB with Suitable MCBs as per direction and wiring complete all as per specfied and directed. Make :-CROMPTON /Havells /Phillips
S&F Garden Light/ Bollards 10W watt are made of extruded Aluminium, profiles with cast aluminium base,opal PC diffusers with integrated LED and driver complete all as per specfied and directed.. Make:- Crompton /Phillips/Havells.
S&F LED Flood light 120W with IP 65 protection on 11 mtr flood light pole as per sample complete all as specifed & directed. Make :-CROMPTON/ Havells/Phillips
Taking down old unserviceable and Supply and fixing connecting and testing (in replacement) timer switch panel box size 400mm x 350mm x170 mm dust and vermin proof made of 16 gauge MS sheet factory made duly painted with two coats of synthetic enamel paint recommended colour over a coat of red oxide primer and mounted inside the following. 06 x Location : CMP Gate Area, GR Lines (JCO, GR Lines (OR), Litchi Bagan Offrs Md Qtr Area, Litchi Bagan OR Md Qtr Area, Khojatoli Offr Accn, Hussainiwala Md Accn,. Location-wise photos be attached alongwith the bills. Timer switch pannel box shall be fixed on one pole/wall in feeder pillar box with flat iron clamp 40x6 mm or other suitable fixing arrangement complete all as specified and directed.
MCB triple pole 32 Amps 230 volt-01 No
Analog electro mechanical time switch 24 hours with minimum setting 30 minutes for daily working contact rating 16 Amps,240 volts,AC with initial charging battery backup having supply and reserve failure upto 150 Amp hours and coil voltage 415 volts
AC contactor ,3 pole,ML-2,415 Volts,50 Hz
Internal wiring with pvc insulated stranded copper conductor of suitable size and making electric connection -01 No.
By pass MCB single pole ,32/40 Amps,230 volts-01 No. Note:- Time switch pannel box shall be fixed on one pole/wall in feeder pillar box with flat iron clamp 40x6 mm or other suitable fixing arrangement complete all as specified and directed.
M/S Sahib N Sahiba Enterprises
Commercial Electric Co.
BHARATI ENTERPRISES
india trading company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .