PERIODICAL SERVICES TO CERTAIN BLDGS AND COMPREHENSIVE REPAIR FOR DAY TO DAY COMPLAINTS AT PARADE GROUND BHARATPUR

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified.

M & L rendering 15 mm thick in CM (1:4) on fair face of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified.

All as above item no 2 but in CM (1:6) finished even and smooth without using extra cement complete all as specified.

M&L for rendering 10mm thick in cement mortar 1:4 on concrete surfaces including finished even & smooth without using extra cement on ceiling complete all as specified.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin jambs pillars etc complete all as specified.

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified.

M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of wall primer akali resistant priming paint with hand roller complete all as specified.

M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of Priming with alkali resistant priming paint with hand roller complete all as specified.

M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

M&L for three coats of white wash on new plastered or unplastered surfaces of walls including prepration of surfaces complete all as specified.

M & L Preparation of old decorated plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified.

All as per Srl item No 11 here in above but applying one coat of white wash on ceiling complete all as specified.

M&L for preparation of old plastered surfaces including removing/brooming down or scraping down loose dirt by steel brushes etc,applying wall care putty where required for filling purpose of any description/cavity etc and applying two coat of oil bound distemper of any colour on wall complete all as specified.

M&L for Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Wall Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work complete all as specified.

M&L for applying two coats of exterior emulsion paint (weather proof ) complete all as specified.

M&L for applying two coats of cement base paint over a coat of Priming plastered and other surfaces with alkali resistant priming paint primer with hand roller complete all as specified.

M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of cement based paint using hand roller of approved colour complete all as specified.

M & L Preparation of old distempered surface of wall including cornices etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of distemper oil emulsion using hand roller white or tinted complete all as specified.

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified.

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified.

M&L for writing letters or figures (Block, Roman, Italic or Indian ) n.exc. 30cm high complete all as specified.

M&L obliterating old writing of any description,n exc 0.1 sqm with paint to match existing work complete all as specified.

Dismantling of stone jali & Stone Pillar of any size any description and any thickness complete all as specified.

M&L for 40mm thick Sikandra stone jali decorative design of approved pattern by Engr-in-Charge including all carving and mounding of corners fixed in cement mortar 1:4 to grooves including all necessary requirment complete all as specified.

S &F of triple layered (White Colour) rotational moulded polyethylene water storage tanks 1000 Ltr (cylinderical vertical with closed top) with 20mm dia ball brass valves,high pressure , with polythene float and flynut including dismantling of existing water tank , complete all as specified.

S&F in repair fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high density of PVC 32mm dia complete all as specified.

S&F in repair of aluminium anodised tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified.

M&L in repair of cast iron nahani trap of 75mm bore including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified.

S&Fin repair of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, ISI marked of 75mm bore complete all as specified.

S&Fin repair of PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, ISI marked of 110mm bore complete all as specified.

S&F in repair of brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.

S&F bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore, fixed in repairs complete all as specified.

S & F in repair angle valve cast copper alwy with chromium plated of size 15 mm bore complete all as specified.

S&F in repair brass ball valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed of 20mm bore complete all as specified.

S&F in repair brass ball valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed of 25mm bore complete all as specified.

Rescuring or easing and Adjusting without taking down shutters of any description exc 1 but n. exc 2 Sqm each complete all as specified.

S&F in repair MS PVC coated curtain rod 20mm dia fixed with fancy type matching pair of brackets fixed with screw complete all as specified.

Hacking out old broken glass any thickness, size, quality or description from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads including S&F 3 mm thick plain sheet glass ordinary quality in square not exceeding 0.5 sqm in each pair complete all as specified.

S & F in repairs Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

Repair and maint to aluminium door & window shutters alongwith necessary fittings and fixtures such as hinges ,rubber washer,rubber seal, aluminium beadings etc complete all as specified.

S & F PVC connection 15 mm bore size with PTMT nuts and PVC washers of length 450 mm etc complete all as specified.

S&F in repairs Aluminium extruded section body door closer hydranlicelly regulated designation no 3 universal type suitable for door shutter up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified.

abhinav and company

Captainkomalchaharconstructions

M/s Ranaji Construction Co

VASUNDHARA AND COMPANY

PD GUPTA AND COMPANY

m/s Purvi Gaur Construction