Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC VILL NANDA KA NAGLA DHAOLI AGRA 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹36.4 L+₹2.0 L (5.91%)Rejected-Finance 19 TAGORE PUBLIC SCHOOL COMPLEX SEWLA SARAI MALOOK CHAND GWALIOR ROAD AGRA UP 282001 | AGRA | AGRA | UP | 282001 | L2 | Rejected-Finance Being higher bidder | |
| 3 | L3₹38.7 L+₹4.4 L (12.8%)Rejected-Finance 59 100 AJIT NAGAR GATE KHERIA AGRA 282008 | AGRA | AGRA | UTTAR PRADESH | 282008 | L3 | Rejected-Finance Being higher bidder | |
| 4 | L4₹38.8 L+₹4.5 L (13.0%)Rejected-Finance DADAWA KURIYAR KHAS BASTI BASTI UTTAR PRADESH 272178 | BASTI | UTTAR PRADESH | 272178 | L4 | Rejected-Finance Being higher bidder | |
| 5 | L5₹39.2 L+₹4.9 L (14.3%)Rejected-Finance | L5 | Rejected-Finance Being higher bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Tech Area Agra
GE AF Tech Area Agra
REPAIR MAINT OF ALUMINIUM WOODEN STEEL JOINERY ROLLING SHUTTER UNDER GE AF TECH AREA AGRA AT AF STN AGRA
2023_MES_595374_1
8200-1513/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF Tech Area Agra
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE AF Tech Area Agra
₹90,000
Yes
15 Jul 2023
13 May 2023
5 Jun 2023
13 May 2023
3 Jun 2023
27 May 2023
15 May 2023 - 20 May 2023
Amount
Taking down door chowkhat with shutter area n.exc 1.5 Sqm each (without taking off shutters from the frame) including making good of jambs with cement mortar 1:4 etc complete all as specified and as directed.
Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) including making good of jambs with cement mortar 1:4 etc complete all as specified and as directed.
S&F in repair factory made 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified and as directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification and shown in drg in SSR Part -II 2020 complete all as specified and as directed
S&F factory made solid panel PVC door moulded shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drg shown in SSR Part -II 2020 complete all as specified and as directed
All as per item No 5 above but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional 8mm square M.S. Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly etc complete all as specified and as directed
S&F 18mm thick PVC foam board (WPC) of density 600kg/cum one side prelaminates and other side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge etc complete all as specified and as directed.
S&F 18mm thick PVC foam board (WPC) of density 600kg/cum both side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples at height upto 15.0 mtr complete all as specified and as directed.
S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples at height upto 15.0 mtr complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) indluding wooden beading from wooden/iron or aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed
S&F 3mm thick sheet glass ordinary quality for wooden/steel window and glazing with oil putty in squares or fixed with beads area in each pane area n.exc 0.50 sqm etc complete all as specified and as directed
S&F 3mm thick figured glass, pin head type and glazing with oil putty in square area n.exc 0.5 Sqm in each pane complete all as specified and as directed
S&F 5.5mm thick sheet glass black ordinary quality for Aluminium framed partition fixed with aluminium anodised cleat and rubber beading area in each pane area n.exc 2.00 sqm etc complete all as specified and directed
S&F 5mm thick figured/frosted glass ordinary/printed quality for aluminium frames fixed with aluminium anodised cleat and rubber beading area in each pane area n.exc 2.00 sqm etc complete all as specified and directed
S&F 12mm thick toughened glass door shutters frosted or transparent including fittings for each shutter; floor spring - 01 No, 300mm long stainless steel handles -02 Nos, locking device 01 No in each shutter leaf including necessary stainless steel Brackets/ Clips and taking out old door shutter with frame of any size and description and making good the disturbed surfaces to match the existing finish and provision of inscribing of 4 wing logo/MES logo complete all as specified and directed.
S&F 300mm long stainless steel finished sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and as directed
S&F stainless steel finished butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed.
S&F stainless steel finished butt hinges cold rolled medium weight of size 75 mm complete all as specified and as directed
S&F 150 mm long stainless steel finished barrel tower bolt of extruded section complete all as specified and as directed
S&F 100 mm long stainless steel finished barrel tower bolt of extruded section complete all as specified and as directed
S&F 150 mm long stainless steel finished handle fabricated type complete all as specified and as directed
S&F 100 mm long stainless steel finished handle fabricated type complete all as specified and as directed
S&F Powder coated aluminium anodised frame for doors, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (minimum thickness of powder coating 50 micron)
S&F powder coated aluminium anodised door shutters, aluminium section weighing 0.55 kg/ m including necessary aluminium anodised joining cleats, glazing clips, ruber neoprene packing, aluminium anodised handles 2 Nos in each door, aluminium anodised hinges 03 No's, aluminium anodised Tower bolt 02 No's, Powder coated aluminum snap beading, screws etc. complete all as specified and directed. (Minimum thickness of powder coating 50 micron)
S&F for Powder coated aluminium anodised window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary aluminium anodised joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed (Minimum thickness of powder coating 50 micron)
S&F for powder coated aluminium wall partition (minimum thickness of powder coating 50 micron) work for partition (fixed portion) with extruted built up standerd tubular section / appropriate Z section and other section of approved make conforming to IS 733 and IS 1285 fixing with dash fastners of required dia and size including necessary filing up the gaps at junction ie at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium section shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, CP brass/ stainless steel screws etc complete all specified and directed by Engr in Charge.
S&F 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations for partition etc, complete all as specified and as directed.
S&F for aluminium anodized powder coated grills made out by using 6 x 5 mm aluminium section having square gap of 50 mm thick with fixing rails of channels 12-15 mm etc complete all as shown in design Cat Part No -DG 101-DG-102 of jindal or equivlement as approved by GE.
Providing and fixing factory made UPVC any colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with multi chambered, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 8mm thick toughened glass etc complete all as specified and directed by Engr in Charge. Note- rate quoted by contractor shall include, the cost of 8 mm thick toughened glass and other connected accesseories.
Supply and fixing factory made UPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5 % tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards any thickness and in any position including cover fillets complete all as specified and as directed.
M&L for solid PVC wall Panelling/ 3D panelling consisting of 5.00mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame including taking down of existing switch board tube light fitting and re-fixing complete all as specified and as directed. Note:- The quoted rate shall include taking down of existing switch board/ tube light and refixing the same at same location after carring out wall panelling work.
S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame complete all as specified and directed
S&F PVC beading fix with adhesive paste all as per manufacturer's instructions complete all as specified and directed
M&L for GI powder coated snap grid frame work for false ceiling of approved (ISI marked) make fixed to galvanised iron steel angle grid 600x600mm size suspended system fixed to GI framed work with main runner (32x24x6.5)mm cross fee (27x24x2.5)mm and moulding (19x19)mm of approved make and section as specified in SSR Part II with suitable hook/fasteners and GI/aluminium suspenders not less than 4mm dia upto 1200mm length @ 1.00m C/C minimum. ceiling system is to be fixed in water level without any sag including ceiling cleats made out of GI flat iron 40x3mm size 60mm long and expansion hold fastner 12.5 mm dia 40mm long. complete all as specified and directed.
S&F sand fix HPSE pre prime non asbestes fiber building board 4mm thick size 595x595mm with decortice finish fixed to GI powder coated snap grid frame work with screw in ceiling complete all as specified and directed.
S & F in repair 25 mm dia SS drapery rods fancy type with brackets ,stops, rollers ,side knobs etc complete all as specified and directed.
S&F in repair double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and directed
S&F in repair aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed
Taking down existing rolling shutter complete any type width and height not exceeding 3M in any position complete all as specified and as directed
M&L for 1.25mm thick steel rolling shutter upto height 3M, without ball bearing as specified including guide channel, top covers anchoring rod, hasp and staple and other necessary accessories required to function the shutter including one shop coat of primer etc complete all as specified and as directed
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
S&F in repair venetian blinds in double layers roller type of approved colour including all accessories, fitting/fixtures required for fixing the same in windows complete all as specified and as directed.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc all as specified and directed.
M & L for fixing 6 mm thick plywood grade BWR type BB as in cover for cooler, Airconditioner or simillar works etc fixed at window incl necessary cutting complete all as specified and directed.
Taking down old steel/wooden windows with holdfast & making good surface to match with the existing and S&F windows/ ventilators fabricated from 0.6mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS- 513 'D' quality) galvanised as per IS-277 with Zinc of 120 gm/sqm. Windows/ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0 mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mm x 12mm flat iron with 10mm square bar MS grill and all fitting, fixtures accessories complete all as specified and shown in drawing no CEAF/STD-191/2014 Sheet 1/2 & 2/2 (4000 Series) NOTE: The quoted rate shall be deemed to be included the following:- (i) Glazed shutter with 4.00 mm thick glass, mesh shutter with 32 gauge stainless mesh and MS grill as per above mentioned drawing is deemed to be inclusive in the rate quoted. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacturer of window only. (iii) making good of jambs in CM (1:4) and applying OBD in two coats including with putty complete.
M/s Srijan Construction Company
deva engineers
Abhi Construction
Captainkomalchaharconstructions
saroj constructions
M/s K S Builders
M/s M S Sharma and Co.
Shiv Krishan Associates
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .