Construction of 2 Nos. of Station Fire Officer and 12 Nos. of Firemen quarters with development works at Tiruchengodu in Namakkal District

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.3 : Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

2.6: Supply and Filling of 40mm HBSJ

2.7: Supply and Filling of 20mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

51.1: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 700 litres

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

53.3 : C.I. Steps ( 5 kg)

Electrical arrangements 69 : S & F of 16 Amp. Power plug

72 : S & F of Box type Fibre Fan hook

73.1 : 6 way - D.B

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

ANNEXURE-I 2.1.1 : Supplying and filling Gravel

2.1.2 : Supplying and filling with well gravel

2.1.3 : Filling crushed stone sand

3.1.1: P.C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM²

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Ground floor / Stilt floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors b. In Gound Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floorr

b. In First floor

c. In Second floor

12.1.1 : Brick partition work in C.M. 1:4 with Admixture using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

14.1.1.I : Precast Cupboard slab 20mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

14.1.1.II : Precast cupboard slab 40mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

b. In Ground floor

c. In First floor

d. In Second floor

16.1.2 : Precast Jally Ventilator 50mm thick.Using standardised M20 grade concrete Mix. (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second floor

d. In Third floor

18.1 : Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

e.For Circular surfaces

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 900mm x 2100mm (Single Leaf)

b) Door size 750mm x 2100mm (Single Leaf)

21.6.1 : R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using standardised concrete mix M20 grade. (using crushed stone sand) a. 900 x 2100mm

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20mm tk. (using crushed stone sand)

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) including plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab (M20) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5 : PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.5.1 : Gully Trap using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

62.2.2 : PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.2 : Supplying and fixing of 32 AMPS Triple pole main switch.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.8 : Run of 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.2.1 : S & F of 3 Nos.of 32 Amps - Fuse unit.

80: S & F of 375x300x20mm thick TW plank

80.1: S & F of 450 x 375 x 20mm thick TW plank

87.1: Supplying and delivery of Three phase ELCB/RCCB

98.3.1 : TW panelled door shutter (with brass fittings) a. 1000 x 2100mm. (Single leaf)

112.1 : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1: Supplying and fixing of Ivory colour Vitrified Tiles (stain free Nano polish) of size 60cmx60cmx8mm for flooring and other similar works in cement mortar 1:3, 20mm thick (using crushed stone sand)

379.4.2.1: S&F of Granite slab of size 4'x2', 18 to 20mm thick for Kitchen arrangement (jet black) (using crushed stone sand) a.In Ground floor

b.In First floor

c.In Second floor

383: S&F of Cuddapah sink 600 x 600 x 200mm

383.4: Providing Double nosing to the edges of Granite slab

384: S&F of PVC flushing cistern

448.2: Supply and fixing 32mm dia PVC Tee with end cap

ANNEXURE-II: A1: Providng one coat of Wallputty for new plastered surface

A2: Removing the hard rock by wedging chiselling and trimming to proper shape where blasting is prohibited including cost of all required tools and plants, labours charges etc., all complete and as directed by the departmental officers.

A3: Drilling the holes 32mm dia in hard granite for anchoring the rods to the foundation including cost of labour charges for drilling and hire charges to equipments, tools and plants etc., all complete and as directed by the departmental officers.

A4: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free.

A5: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free.

A6: Providing teakwood glazed french window shutters and 5.5mm thick ground or frosted glass for panels including labour charges and cost of furniture fittings as per schedule ‘E and directed by the departmental officers. a) 1800mm x 1650mm

A7: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A8: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A9: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A10: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A11: METERING PANEL FOR 6 SERVICES ( 6 flats + 1 common & 1 spare) Suitable for 6 PC/HC (1 Block of 6 in 1, G+2) Supply and erection of 125 Amps capacity floor mounting metering panel board (Cubical type) of size 4.5' x6.5'x1' with bus bar chamber Incoming: 3 Nos. 300 A cut outs Bus capacity: 125 A 3 phase 4 wires copper flats for phases and neutral Outgoings: 6 Nos. metering chamber.

A12: METERING PANEL FOR 4 SERVICES ( 2 flats + 1 common & 1 spare) Suitable for 2 INS (1 Block of 2 in 1, G+1) Supply and erection of 125 Amps capacity floor mounting metering panel board (Cubical type) of size 3.0' x6.5'x1' with bus bar chamber Incoming: 3 Nos. 200 A cut outs Bus capacity: 125 A 3 phase 4 wires copper flats for phases and neutral Outgoings: 4 Nos. metering chamber.

A13: Supplying and fixing of TNEB meter board suitable for 3 phase 100amps service connection made up of angle iron frame work of size 2' x1.5'using angle iron of size 1.5"x1.5"x1/4" rigidly food on covered wall covered with hylem sheet of size 2' x 1.5' of 12mm thickness with bilts & nuts and necessarysupport ansd fixing of 3nos of 100amps fuse unit 500v and 1 no neutral link copper earthe flat of size 1"x1/2"with iron connection of EB meter to fuse unit by sqmm pvc insulated copper wire with earth connection complete

A14: Supplying and delivery of following PVC armoued LTUG cable with ISI mark. a) 3.5 core 70 sq.mm. PVC Armoured UG Cable

b) 3.5 core 35 sq.mm. PVC Armoured UG Cable

A15: Supply & fixing of Cable gland suitable for following PVC armoured LTUG cable etc., all complete. a) Cable gland suitable for 3.5 core 70 sq.mm. UG Cable

b) Cable gland suitable for 3.5 core 35 sq.mm. UG Cable

A16: Supply and laying of 4 Run 6 Sq.mm and 1 Run 1.5 Sq.mm for Earth Copper in Sutiable PVC conduit suitable Pipes etc (from Meter Panel to house DB)

A17: Labour charges for conveying and laying of UG cables in the cable trench including earth work and providing sand cushion with brick layers below ground level etc., complete for UG cable of size 4 to 95 Sq.mm and 2, 3, 3.5, 4 core with ISI Mark etc., all complete and as directed by the departmental officers.

A18: Labour Charges for conveying and fixing of UG Cable of Size of 4 to 95 Sq.mm and 2, 3, 3.5, 4 core with necessary MS clamps and brass screws including cost of materials and redoing the dismantled portion in to the original position etc., all complete and fixing of UG cables on walls and ceiling etc., all complete and as directed by the departmental officers. (Above G.L)

A19: Supplying and laying of following GI pipe "B" class with ISI mark. a. 65mm dia GI "B" Class pipe

b. 50mm dia GI "B" Class pipe

A20: Supplying and delivery of following dia GI/CI/GM specials with ISI mark of best approved quality a) 65mm dia GI bend

b) 65mm dia GI coupling

c) 65mm dia GI Elbow

d) 50mm dia GI Bend

e) 50mm dia GI Coupling

f) 50mm dia GI union

g) 50mm dia GI Hex Nipple

h) 63mm dia CI Foot valve

I) 50mm dia GI Tee

j) 50mm dia GM Non-Return valve

k) 32mm dia GI Union

l) 32mm dia GI Hex Nipple

m) 32mm dia GM Gate valve

n) 50mm dia GM Gate valve

o) 25mm dia GM Gate valve

A21: Supplying and fixing of three phase DB box hylem sheet steel encloser with detabased gland plates for flush/surface mounting with bus bar neutral lines and earth bus bar ( without Mcb's ) etc.,

A22: Supplying and fixing of Four Pole 6 A to 32A, 10KA Miniature Circuit Breakers 240 V / 415V 50HZ - AC supply suitable for both lighting and motor cir-cuits - Lower end with ISI mark

A23: Supplying and fixing of Single Pole 6A to 32A, 10KA Miniature Circuit Breakers 240 V / 415V 50HZ – AC supply suitable for both lighting and motor cir- cuits - lower end with ISI mark

A25: Supply & fixing of borewell MS Clamp sets suitable for 150 mm dia borewell etc., all complete

A26: Supply and delivery of 3 HP openwell submersible pumpset as per IS 14220 / 2002 without panel board. The motor should be confirming pump and motor HP rating should be specified Duty: lpm X m = 50lpmx25m

A27: Supply and delivery of 5 HP three phase submersible pumpset suitable for 150mm dia Borewell as per IS 8034/2002 without panel board. The motor should be confirming pump and motor HP rating should be specified Duty: lpm X m = 50lpmx125m

A28: Labour charges for the erection of submersible pumpset in borewell / openwell upto 5 HP

A29: Supply and delivery of Three phase panel Board with two level guard auto start with ISI mark For 5 HP for Borewell

A30: Supply and delivery of Three phase panel Board with two level guard auto start with ISI mark For 3 HP for openwell

A31: Supply and laying of 3 core of 4 Sqmm submersible PVC Flat cable including cost of all materials etc., all complete and as directed by the departmental officers.

A32: Supply, delivery and fixing of nylon rope of best and approved quality for tying the delivery line with submersible pumpset for safety measure etc., all complete and as directed by the departmental officers.

A33: Supplying and delivery of following dia "U" PVC pipes. a) 32mm dia UPVC column pipe

A34: Supplying and fixing of 32mm dia Cast Iron adopter for connecting submersible pumpset with UPVC pipe etc.

A35: Supplying and delivery of following dia PVC Pipes a) 50mm PVC 10 Kg/Cm² pipe

b) 40mm Dia PVC Pipe 10 Kg/Cm²

c) 32mm PVC Heavy pipe for submerssible flat cable

A36: Labour charges for following dia of GI pipes (Below Ground level) a) 65mm dia GI "B" Class pipe

b) 50mm dia GI "B" Class pipe

A37: Supplying and delivery of following dia PVC specials of best and approved quality having ISI mark including cost of specials and delivery at site of work etc., all complete and as directed by the departmental officers. a) 50mm dia PVC Coupling

b) 50mm dia PVC Elbow

c) 50mm dia PVC Tee

d) 50 x 40 mm dia PVC Reducer

e) 40mm dia PVC Elbow

f) 40mm dia PVC Coupling

A38: Labour charges for following dia of PVC pipes (Below Ground level) a) 50mm PVC 10kg /cm² pipe

b) 40mm PVC 10kg /cm² pipe

A39: Supplying, laying, fixing and jointing the following PVC pipes as per ASTM-D-1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable PVC/GI specials/GM specials. (Below Ground level). a) 32 mm ASTM - D pipe.

A40: Supplying and fixing of conceled shower valve CP shower arm with overhead shower rose with ISI Mark of best approved quality including cost of matrial and labour charges for fixing etc., all complete and as directed by the departmental officers.

A41: Supplying and fixing of 1/2" x 2" Round CP flange with ISI Mark of best approved quality including cost of matrial and labour charges for fixing etc., all complete and as directed by the departmental officers.

A42: Supplying and fixing of 1/2" x 1/2" expansion CP Nipple with ISI Mark of best approved quality including cost of matrial and labour charges for fixing etc., all complete and as directed by the departmental officers.

A43: Supplying and fixing of precast exhaust fan cover including precast ring of size 300mm dia with louvered shutters arrangements for 225mm sweep (heavy duty) including cost of materials & labour charges for fixing in position etc., all complete and as directed by the departmental officers.

A44: Drilling of 6" dia (150mm) vertical bore in hard rock areas anywhere in Tamil Nadu including transportation to the worksite in hard rock areas and developing the borewells etc., all complete and as directed by the departmental officers. a) Up to 60m below Ground Level

b) From 60m up to 90m

c) From 90m up to 120m

A45: Reaming from140/150mm pilot bore to 300mm dia bore as directed by the departmental officers a) Upto 60mtrs depth below ground level

b) From 60m up to 90m

c) From 90m up to 120m

A46: Labour charges for inserting of 150mm dia PVC casing pipe in the scheme area to required depth and as directed by the departmental officers.

A47: Supplying, delivery and fixing of 160mm outer dia PVC casing pipe 6kg/cm2 of approved quality with ISI mark conforming to IS specifications as per IS 12818/1992 for borewell with average wall thickness of 6.10mm and with inner/outer threaded ends at standard length etc.,

A48: Supplying and fixing of 160mm dia PVC end cap for borewell of best approved quality with ISI mark conforming to IS specifications including cost of materials conveyance to site and labour charges for fixing in position etc., all complete.

Prasath Constructions (BID ID -1215761)

N SAKTHIVEL AND CO (BID ID -1216828)

BHARATH BUILDING CONSTRUCTION (BID ID -1216528)

J V CONSTRUCTIONS (BID ID -1217995)

SRI SAKTHI CONSTRUCTIONS (BID ID -1217412)

P SELLAPPAGOUNDER (BID ID -1217397)