CERTAIN B/R REPAIRS INCL FINISHES TO WALL / CEILING OF OFFRS MESS COMPLEX, SINGLE LIVING OFFRS ACCN SMC AT AF STN MEMAURA

Amount

Demolition of brickwork built in cement mortar complete all as specified and as directed.

M&L for Brick work with sub class B' bricks straight or curved on plan exc 6m mean radious, built in CM 1:6 complete all as specified and directed.

All as per above item No 02, but except bricks -ditto-

M&L for Half brick work with subclass ‘B’ bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4, including finishing the surfaces even and smooth, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on any faces of brick or concrete surfaces and finish the surface even and smooth without using extra cement including taking down cement or cement lime plaster of any description including racking out joints, hacking for key, scrubbing down etc complete all as specified and directed

M&L for rendering 10mm thick in CM 1:4 on brick or concrete ceiling surfaces and finish the surface fair and even including taking down cement or cement lime plaster of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M &L Complete removal of exsting treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of 1.0mm putty and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed .

Material & labour for reinforced cement concrete 1:2:4 type B1 used as in beams,cantilevers,bressummers,lintels,rcc band etc any height complete all as specified and directed.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M &L for fair finished form work to edges of concrete flats,opening in concrete walls, floors and roofs and sides of RCC bands in walls, horizontal or sloping and similar work all exceeding 20cm wide comlplete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection/path laid in alternate panels 75mm thick finished even and smooth without using extra cement.

Taking down of shutters of any description exc 1.0 sqmtr but n-exc 2 Sqmtr each

S & F factory made glazed and skeleton WPC door shutter 30mm thick solid plain of required size comprising of virgin polymer of K value 58-60(Suspension grade), calcium carbonate and natural fibres(wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single Extruded (inner) with density not less than 650 kg/cum manufactured by Rajshri an ISO E9001-2015 certified company having good screw holding capacity (screw withdrawl strength of 2000N Face & 1000N Edge, minimum compressive strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof, Fire retardant and fixing with S.S butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws all as per direction of Engineer-in- Charge.

S & F 100 mm long butt hinges,extruded aluminium alloy ISI marked competed all as specified and directed.

S & F of stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple all as specified and directed.

S & F of aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long all as specified and directed.

Supply & fix ISI Mark aluminium handles 150 mm long, cast type, anodized complete all as specified & directed.

S & F 300 mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

M/S KAUSHIK CONSTRUCTION (BID ID -3274279)

M/S SURYA ASSOCIATES (BID ID -3267722)

M/s RAAJSHREE INFRA (BID ID -3269011)

MS SHUBHAM SANTOSH JAIN (BID ID -3269123)

M/s R D Enterprises (BID ID -3269046)

Rakesh Traders (BID ID -3272636)

M/S WALIA TRADESRS (BID ID -3268386)