81778 RESURFACING OF ROAD AND REPAIRS TO ROAD FURNITURE AT VARIOUS LOCATIONS IN ZONE B AREA UNDER GE (NDA) KHADAKWASLA

Amount

M&L for preparation of black top surfaces by brushing with wire brushes for removing caked mud, existing layer of thermoplast paint etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags and compressor to remove all loose dirt etc, and apply evenly a priming / tack coat using paving bitiminous primer (VG-10 grade) @ 5Kg per 10 Sqm complete all as specified and directed.

M & L for bituminous premix semi dense asphaltic concrete using paving bitumen (VG-30 grade), 30 mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete all as specified and as directed. [Note : (i) The actual binder content for SDAC used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Schedule Item. (ii) The rate quoted shall deemed to be inclusive of work in patch manner]

M&L for repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cum of sand), again well rammed (including supply of premix binder and sand) depth of potholes not exc 30 mm complete all a specified and directed. (Note :- The rate quoted shall deemed to be inclusive of work in patch manner)

M&L for making lines, dashes, arrows, letters etc., on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sign glass beads @ 250 gms per Sqm area confirming to MOST & BIS specification, not less than 2.5mm thick of white / golden / yellow as approved colour/ shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e. cleaning of surface by removing all dust, dirt, oil grease etc complete all as spcified and directed by Engineer incharge

S & F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufacturer's instructions complete all as specified and as directed.

S&F in repair solar stud of width 122.5mm, length 132.5mm, height with stump 55mm, stump dia 26mm electronically operated with solar cell LED PCS, Ni-Cd 1400AH Battery with aluminium main frame bottom frame aluminium, reflective in two opposite direction and fixed in road surface as per manufacturer's instructions complete all as specified and as directed.

S&F in repair 3M Vertical roadway reflective type high performance metal delinator, type XI DG3 reflective sheeting, ellipsoidal body, grooves across the length of delinator etc to be fixed in PCC 1:2:4 (300 mm X 300mm X 300 mm) type B1 using 20 mm graded stone aggregate including necessary excavation & earth work complete all as specified and directed.

S & F ir repairs unbreakable traffic convex mirror of 40 Inch dia fixed over and including 50 mm bore SS 304 Pipe of length 2000 mm including embedding in PCC 1:2:4 (300x3000x300mm) type B1 complete all as specified and directed.

Carrying out measurement of roughness as per Provn laid down in IRC SP-16-2019. Contractor will engage certified consultants / testing agency and IRI resurfacing value before resurfacing and get particlar road length approved by GE for resurfacing before execution complete all as specified and directed.

All as per Ser. Item No. 9.00 above but after completion of resurfacing and comparison wih previous data. The IRI value obtained post resurfacing shold have IRI value for "Good" quality post resurfacing complete all as specified and as directed. (NOTE FOR SER. ITEM NO. 9 & 10 ABOVE: Measurement of road roughness shall be carried out by SEMT wing CME Pune / Govt. Approved and NABL accredited testing agency)

Sunshine Ventures (BID ID -3241619)

MOHANLAL MATHRANI CONS. PVT. LTD. (BID ID -3240387)

Aadarsh Bharat Enviro Pvt Ltd (BID ID -3241222)

KATKURI UPENDER REDDY (BID ID -3243156)

Deccan Enterprises (BID ID -3242461)

S.G.ENGINEERING COMPANY (BID ID -3241902)

Mukund Engineers and Contractors (BID ID -3243522)

M/s.BAJRANG CONSTRUCTION (BID ID -3243230)

J.G.Goel (BID ID -3243258)

OM GANESH CONSTRUCTION (BID ID -3243424)

M/S CHANDAN BUILDERS (BID ID -3243384)