REPAIR TO DRAIN GATE FENCING COMPOUND WALL IN MD OTM ACCN AT TECHNICAL AND DOMESTIC AREA AT MILIT GIRINAGAR PUNE 25

Amount

Taking down cement plaster of any description including racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified and as directed.

M&L for rendering 15 mm thick plaster in CM (1:6) on wall surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick plaster in CM (1:4) on wall surface finished even and smooth without using extra cement complete all as specified and as directed.

Racking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses buit in cement or cement lime mortar complete all as specified and as directed.

M&L for keyed pointing to random or polygonal rubble uncoursed or brought upto courses in cement mortar 1:4. complete all as specified and as directed .

Dismantling Chequered tile/interlocking tile including cement mortar bedding removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed .

Demolition of cement concrete in ground floors and paving n. exc 15cm thick below or above GL & cleaning premises complete all as specified and as directed.

M&L hardcore of broken stone or boulders of gauge n.exc.63mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base etc complete all as specified and directed.

S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm/20 x 20 x25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry including 15 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete coloured, glossy finish paver block of M-35 grade, rubber moulded with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Demolition of cement concrete of any description and in any position, provided for complete all as specified and as directed.

M&L Plain cement concrete in foundation type C 2, 1:3:6 (40 mm gde stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M & L 75mm th PCC 1:3:6 type C-2 as in Floors, Paving, Hard standings & plinth protection, finished even and smooth without using extra cement complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels, drains, complete all as specified and directed.

Dismantling wrought iron or mild steel work such as grill/roof purlin etc not otherwise provided for complete all as specified & directed.

S&F Structural rolled steel in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc., conf to Fe 410-W (Gde-E-250) quality 'B' complete all as specified and as directed.

S&F Non structural steel framed work of angle or unequal angle in grill, grating ,post etc. with ends of bars shouldered or rebated or forged into spike framed guard bars, barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

M& L for mild steel black sheet in door 1.60 mm thick in steel gate and in similar work cut to size ,holes punched ,including round headed screws ,cut nails or revets,and fixed to wood or steel framing with plain 40 mm lap joints with reveted or welded sams including or turning up, mitred complete all as specified and directed.

M&L for 2 coats of synthetic enamel paint over a coat of red oxied primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar incl arches, pillers etc.complete all as specified and as directed.

M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC 1:3:6 type C1 ( using 20 mm graded stone agg) and setting in cement mortar (1:6) complete all as specified and as directed.

All as per item herein above but except precast concrete block set in CM 1:4 complete all as specified and directed.

M&L for Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:4, brought up to courses, complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM (1:4) finishing even without using exta cement fair complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embeddded in concret ,brick work masonry etc including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh,any type complete all as specified and directed.

M & L for PCC 1:4:8 type D-2(40 mm graded aggregate) in fdn filling and mass concrete complete all as specified and directed.

M&L for Mild steel flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc and similar work conforming to FE-290 Gde E-165 complete all as specified and as directed .

M & L for mild steel round bars 08 mm dia and over cut to length bent to shape required and fixing as required in fencing complete all as specified and as directed .

S&F Chain link fencing of mesh size 50mm x 50mm, line wires of dia 3mm including standards rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt n exc 5cm long and dia of neck 11 to 15mm complete all as specified and as directed .

M&L for preparation of new/old distembered wall surfaces and applying two coat of oil bound distemper over a coat of approved primer complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over Old/New surfaces of wall including preparation of surfaces and necessary scaffolding required for painting work, safety measures etc complete all as specified and directed.

M/s.C.D.Rathod (BID ID -3360593)

Sayili Enterprises (BID ID -3360195)

OM GANESH CONSTRUCTION (BID ID -3360629)

Mehta and Co. (BID ID -3352315)

Sky Vision Construction (BID ID -3361051)

Vikrant Deepak Mate (BID ID -3352133)

M/S, J.K.CONSTRUCTION (BID ID -3360170)