PAINTING/ PERIODICAL TO TARMAC AND REPAIRS TO CERTAIN BLDGS OF TARMAC AREA AT SONEGAON NAGPUR

Amount

Removing old paint by paint removers by using Trisodium Phospate (TSP) and warm water or burning off by blow lamps and cleaning with scraper for removing all of various shaded paint of any description and any type including dirt ,dust and other foreign material complete all as specified and directed by Engr-in-charge.

M&L for applying Weather Shield Waterproof paint of white/yellow (approved colors) colour & shade for marking with machine on bituminous/concrete surface width of paint line as per direction of Engr-in-charge at site & managing the traffic control with proper arrangement etc complete all as specified and directed .Make:- ASIAN-MOST/CMS (APCO-BS)/THERMOLINE/STP or equivalent as approved by AGE(I).

M &L for preparation old steel and iron surface not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paints upto any height including scaffolding works as specified and directed by Eng-in-charge up to 12 mtr Hieght.

M &L for preparation of previously untreated surfaces of steel and iron by coating with mordant solution including washing and cleaning etc not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paints upto any height including scaffolding works as specified and directed by Eng-in-charge up to 12 mtr Hieght.

M & L for preparation of surfaces already painted of concrete, black bituminous pavements over 10 cm width or girth and applying one coat painting with water base road marking paint (white/snow white/sporty yellow/ming Red/sky blue/any Tint) all as specified and as directed, Make: Kansai Nerolac Note/Johnson Nicolson/Shalimar and equivalent.

M & L for painting with one coat to lines dashes, arrows, letters figures etc of size as required on existing painted surfaces of rigid cement concrete and similar works not exc 10 cm in width or girth using with water based road marking paint of approved shades including preparation of surfaces complete all as spfd and directed Make: Kansai Nerolac Note/Johnson Nicolson and equivalent Note:- The dashes, lines, arrows, letters and other painting work shall stand out boldly and solidly without showing signs of brush marks or surface underneath. If required the surface shall be repainted until desired results are obtained, the rates quoted by the contractor shall be deemed to be included this element.

M & L for writing letters or figures or squares (Block, Roman, Italic or Indian) of any height and of width with synthetic paint including preparation of surfaces complete all as specified and as directed.

M&L for Preparing Old painted surfaces of wall and applying one coat of cement base paint.

M&L for preparation of old surface and applying one coat of white wash on ceiling.

M&L for Preparing old plastered surfaces of wall and applying one coat of OBD all as specified and directed

Dismantiling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings/ walls etc all as specified and directed by Eng-in-chg.upto 12 mtr height

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts , in roofs, walls etc. with grade of zinc coating 275.fixed all as specified and directed by Eng-in-chg.upto 12 mtr height (rate of L-type or J-type or cranked hook bolts included in quoted rate will be count)

Plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts , in roofs, walls etc all as specified and directed by Eng-in-charge upto 12 mtr height (rate of L-type or J-type or cranked hook bolts included in quoted rate will be count)

M&L for Fe 410-W (Gde-E- 250) quality-A Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as directed by EIC

S&f pre-painted galvalume aluminiun zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws and self drilling screws of appropriate size with rubber washer for water tight fixing complete all as specified and directed by EIC in roof.(MAKE TATA,JINDAL,ISPAT or equivalent.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile trength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified by Eng-in-charge

Rajapriyaconstruction