Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹28.1 LAccepted-AOC 50 PANCHVATI COLONY KODARIYA MHOW PIN 453441 | MHOW | MHOW | MP | 453441 | L-1 | Accepted-AOC Accept | |
| 2 | L-2₹29.0 L+₹94,494.40 (3.36%)Rejected-Finance | L-2 | Rejected-Finance High rates | |
| 3 | L-3₹30.1 L+₹2.0 L (7.09%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L-3 | Rejected-Finance High rates | |
| 4 | L-4₹33.5 L+₹5.4 L (19.4%)Rejected-Finance 148 SANGHI STREET MHOW MP 453441 | MHOW | INDORE | MP | 453441 | L-4 | Rejected-Finance High rates | |
| 5 | L-5₹33.7 L+₹5.6 L (19.9%)Rejected-Finance | L-5 | Rejected-Finance High rates |
Tender Value
₹39.1 L
EMD Value
₹78,200
Closing Date
6 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (MCTE)
GE (MCTE) Mhow (MP) 453441
SPL REPAIR TO BLDG NO RB-39 AND RB-40 (15 QTRS) AND RB-66 OF MCTE UNDER GE (MCTE) MHOW
2023_MES_631194_1
GE(MCTE)/MHOW/39(T) OF 2023-24
Open Tender
Civil Works
Works
180 days
GE (MCTE) Mhow
As Per Tender Document
9 documents required · 9 mandatory
₹500
Yes
GE (MCTE) Mhow
₹78,200
Yes
6 May 2024
5 Dec 2023
8 Jan 2024
5 Dec 2023
6 Jan 2024
23 Dec 2023
Amount
B/R WORK
M&L for taking down/ dismantling of existing roof treatment of any description such as PCC Padding/ Coba treatment/ mud phuska/ Lime conc, old APP membrance roof treatment etc terracing including screed bed etc. Hessian base felt/ tar felt etc. (any type and thickness) complete all as specified & directed.
M&L for Removal of demolished materials to a distance exceeding 250 Mtr but not exceeding 500 Mtr and deposting where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on roof surface including mixed with WPC as per manufacturer's instruction's and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for separately as supply only under respectiveitem of sch 'A'.
M&L for Water proofing on roof/ parapet with testing & 10 years gaurantee with the following steps:-
(a) STEP-I M&L for the roof surface shall be rendered clean prior to application of SmartCare PU Aqua. Mechanical griding of the surface shall be done so that it is free from dust, debris and oil deposits. The residual moisture of the surface shall be less 12 % (Shall be checked with moisture meter). The surface shall be treated with crack filler (upto 5mm) & polymer modified mortar (cracks wider than 5mm). complete all as specified and directed.
(b) STEP-II M&L for Priming Application of the roof surface : The surface shall be less than 4 % moisture content prior to application. It should be clean and free of grease, loose particles, dust etc. Using mechanical grinding so that it becomes smooth. The surface shall then be primed with SmartCare Epoxy Primer @ 200 gm /sqm with water dilution of 30% and application of PU coating shall be done within 24 hours of primer application complete all as specified and directed.
(c) STEP-III M&L for waterproofing coating :- Providing and Applying waterproffing treatment using one component, water based polyurethane cast in situ waterproofing membrane, Asian Paint Smart care PU Aqua or and equivalent ; of a minimum thickness of 1.2 - 1.5mm at a consumption of 2.5 kg/sqm exhibiting a tensile strenght in excess of 1.5 Mpa and an elongation in excess of 450% as per ASTM D 2370. The membrane upon curing shall exhibit a crack bridging ability in excess of 4mm ensuring accordance that the surface moisture percentage in and around 10%. The cast in situ membrane shall be spray applied onto the wall surface via means of an airless spray machine or short nap roller as per the manufacturers specification. The two coats application shall be done at a differance of 12 hours .(The above work can be done all as specified and direction of Engr-in-Charge) Note :- The work of water proofing treatment shall be got executed throughh expert team of manufacturers or authorised applicator of manufacturer approved by GE. Make : Asian Paints/ PIDILITE/ STP/ FOSROC/ ACC/ L&T/ MARUTI/ Dr. Fixit/ IWL. The gaurantee of the above work shall be 10 years which is given by the Company.
Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/ slabs/ blankets any thickness including grid work/ aluminium frame work, cover fillets complete all as specified.
Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/ slabs/ blankets any thickness including grid work/ aluminium frame work, cover fillets complete all as specified and directed.
M&L for 10-12mm thick decorative plaster of paris false ceiling (Gypsum anhydrous) to flat/ curved surface, sunk or raised surface in one or two layers all as specified and directed by Engr-in-Charge over metal frame work and reinforced with G.I wire mesh (Fillets, metal frame work and G.I wire mesh paid seperately) complete all as specified and directed.
M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre incl Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
S&F for 14mm thick WPC louvers for wall panelling of premium quality, waterproofing, anti-termite, approved coloured by Engr-in-Charge including Aluminium/ GI framework, necessary GI/ Aluminium Cleat, accessories, necessary fittings all as specified and directed by Engr-in-Charge. Make : Premium quality of BIS marked of approved registered company .
S&F for 14mm thick WPC louvers for false ceiling of premium quality, waterproofing, anti-termite, approved coloured by Engr-in-Charge including Aluminium/ GI framework, necessary GI/ Aluminium Cleat, accessories, necessary fittings incl Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-Charge. Make : Premium quality of BIS marked of approved registered company .
S&F for 3mm thick Polygranite sheet of size 4' x 8' for wall panelling of premium quality, waterproofing, anti-termite, approved coloured by Engr-in-Charge including best addhessive for pasting it on wall, including preparing the walls, making leveling, including necessary putty etc necessary fittings all as specified and directed by Engr-in-Charge. Make : Premium quality of BIS marked of approved registered company.
M&L for preparation of complete removal of existing treatment of wall and applying with textured interior paint of required shade two or more coats applied @ 3.28 ltr/10 sqm over and including priming coat of with primer applied @ 2.20kg/10 sqm incl 1mm thick wall putty complete all as specified and directed.
S&F 6mm thick exterior grade High Pressure Laminate Sheet (HPL) of max size 4' x 8' as fixed at all heights with aluminum frame work section 25 x 38 x 1.6mm thick rectangle tube of grid size 1200 x 600mm and fixing the grid with aluminum cleat angle of size 19 x 19 x 2mm on walls with required size of screws/ rivets and PVC rawal plugs and finally joining the grooves with suitable materials all as specified and directed. Make : Premium quality of BIS marked of approved registered company.
S&F 12mm Toughened Glass Panel door, frosted with monogram of any design/ description as directed by Engr-in-Charge, including all necessary fittings, accessories, and SS Handles on both sides of doors complete all as specified and directed.
Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of concrete/ brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A.
M&L for preparation of newly surfaces of walls and applying two coats of with Premium Acrylic Smooth exterior paint and including priming coat of exterior primer and incl one coat wall putty as per manufacturers instructions complete all as directed by Engr-in-Charge. (Note : painting will be done by brush/ spray/ roller of building upto the height G+2) complete all as specified and directed with four years of gaurantee.
M&L for complete removal of exisitng surfaces of walls and applying two coats with Premium Acrylic Smooth exterior paint and including priming coat of exterior primer and incl one coat wall putty as per manufacturers instructions complete all as directed by Engr-in-Charge. (Note : painting will be done by brush/spray/roller of building upto the height G+1) complete all as specified and directed with four years of gaurantee.
M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.
M&L for preparation of new surfaces pf plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat wall putty complete all as specified and directed.
M&L for preparation of complete removal of existing treatment of walls and applying two coat of distemper oil emulsion incl priming the surface and incl wall putty complete all as specified and directed.
M&L for Rendering 5mm thick on fair faces of concrete/ brick interior ceiling surfaces in cement mortar 1:3 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat thick ceiling putty complete all as specified and directed.
Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed
M&L for Brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed
S&F powder coated aluminium sliding window three track with two glass shutters using 5mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperature 1.61mm using aluminium powder coated section aluminium cleat, PVC track, bearing, handle, lock, rubber beading etc complete all as specified and directed.
S&F powder coated aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremesh including removing old steel ventilators incl finishing the demolished surfaces with & incl rendering 10-15mm thick CM 1:4 of fair finshes including 02 coat of cement based paints with primer incl all fittings, accessories etc complete all as specified and directed.
M&L for 5.5mm thick sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.
S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet used in partition/ shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as specified and directed.
Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door Chowkats of size 65 x 125mm double rebate of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100 N (Edge), minimum compressive strenght of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ mositure proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and lenght complete as per direction of Engineer-in-Charge. (MS hold fast/ lugs or SS dash fasteners etc complete all as specified and directed).
S&F SS grade 120mm size, hinges, heavy weight, complete all as specified and directed.
S & F Factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE FLUSH DOOR SHUTTER of size 30mm thick comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum , screw withdrawal strenght of 1800 N (Face) & 900 N (Edge), minimum compressive strenght of 50 N/Sqmm, modules of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ mositure proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per the direction of Engr-in-Charge. Note stainless steel butt hinges with necessary screws shall be paid seperately.
S&F 200mm size aluminium, anodised barrel tower bolt of extruded section. complete all as specified and directed.
S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type. complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles, complete all as specified and directed.
M & L for Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
All as per item No.42 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
All as per item No.44 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 350 x 250 x 7mm/ 450 x 300 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
M & L for Vitrified Ceramic tiles 10mm thick dark shade (square/ rectangular) polished, area of each tiles exceeding 0.64 sqm, but not exceeding 1.40 sqmtr in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6
All as per item No.47 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed
S&F in repairs vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed.
S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.
S & F in repairs Stop/ angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and directed
S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.
S & F in repairs Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality complete all as specified and directed.
S & F in reparis Stainless Steel Soap Dish fixed to wall all as specified and directed by Engr-in-Charge. Make : Prayag Cat Part No BA-15S or equivalnet.
S&F in repair SS towel ring brass chromium plated with glossy finishes complete all as specified and directed.
S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed.
S&F, laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.
S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.
Taking down old curtain rods/ drapery rods of any description and S&F 25mm bore Stainless Steel Curtain rod with premium quality including brackets and other accessories complete all as specified and directed.
S & F PVC size 110 x 110mm Nahani Trap all as specfied and directed.
S&F Brass Bottle Trap 300mm (12") Designer wall connection pipes and wall flange complete all as specified and diretced. Make : Prayag Cat Part No BEA-28 or equivalent in approved make by GE. complete all as specified and directed.
Demolition of stone slab and tiles, interlocking paver block laid bedded and pointed in any mortor of any description or thickness in floor complete all as specifed.
M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, table top for wash basin, urinal partition, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for Rubber Moulded Machine pressed factory made precast concrete paver block of square size glossy finish any size and shape conforming to IS 15658-2006 of 60mm thickness, M-35Grade with grey cement and pigment over 40mm thick (average thickness) sand filling complete all as directed. (Note :- Sand shall be measured and paid seperately)
M&L for Sand Filling under floors or in foundations including watering and consolidation
M&L for 100mm thick PCC type B2 (1:3:6) using 40mm graded stone aggregate) in subbase, path, paving, hardstanding etc, complete all as specified and as directed by Engineer-in-Charge.
Dismantling of cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches or floor or wall if required.
S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.
S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.
S&F in repair PVC (SWR) bend/ shoe 75mm dia, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.
S&F in repair PVC (SWR) Tee, Reducer/ junction (single T) equal or unequal 75mm dia, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.
S&F in repair PVC (SWR) bend/ shoe 110mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.
S&F in repair PVC (SWR) Tee, Reducer/ junction (single T) equal or unequal 110mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.
S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.
Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.
S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as in ridges valley gutters etc complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed.
S & F mild steel work as in main and cross beams, hip and jack rafters; purlins, vertical sections, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confiring to Fe 410-W (Gde-E 250 (quality A) complete all as specified and directed.
S& F mild steel works in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment, confirming to Fe 410-W Gde-E 250 (quality A) complete all as specified and directed.
M & L for preparation of new iron or steel surfaces of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat oxide zince chrome primer complete as described.
Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.
M&L for Preparation of old wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.
M&L for PCC 75mm thick type B2 (1:2:4) using 40mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed.
M & L for Treating the top surface of the filled earth @ 5.00 ltr of emulsion per Sqm of surface area with ATT. complete all as specified and directed.
M & L for Treating the soil along with internal periphery of room at the rate of 2.25 litre of emulsion per metre of surface area with ATT complete all as specified and directed.
M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per Sqm of surface area, complete all as specified and directed.
M & L for 6mm thick Fibre Cement Designer Ceiling Tile, (High Pressure steam cured), pre-painted, self -embossed, reinforced Everest designer cement boards (Ivory Colour) of Oceanic/ Lake & Hill/ Electra/ Cascade texture, conforming to IS 14862 : 2000 Category 3 Type B, having Density 1200kg/ m3, miniumum module of rapture greater than 10 Mpa and Compressive strength 38.23 Mpa, complete all as specified and directed
S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement complete all as specified and directed.
S & F Continuous (piano) hinges, 30mm Width of flaps (when open) in mm brass, bright finish or electrogalvanised Continuous (piano) hinges, bright finish or electrogalvanised complete all as specified and directed.
S& F 100mm size MS mat/ glossy finish handle complete all as specfied and directed.
Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Pidilite, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gaurantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3mm thick APP polymeric proofing membrane (centre core shall be 150 GSM, weight not less than 4 kg/sqmtr) of film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface. NOTE :- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.
S&F in repair 15mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specifed and directed.
S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specifed and directed.
S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed.
S&F in repair the old sinks incl waste coupling, waste pipe and all necessary fittings complete all as specifed and directed.
E/M WORK
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc, and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.
Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.
Taking down carefully MCB DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.
Taking down existing ceiling fans any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed.
Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including metal flush box, modular cover plate suitable size and cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:-
(a) One light/ fan/ bell point controlled by one/ two way switch, complete all as specified and directed.
(b) One 5 Amps socket out let point controlled by one switch on SAME BOARD with other switches. complete all as specified and directed.
(c) One 5 Amps socket out let point on independent board controlled by one switch. complete all as specified and directed.
All as per item No.108 here in before but using pvc FRLSH insulated unsheathed 2.5 sqmm cross sectional area cable for phase/ neutral & for earth 2.5 Sqmm green PVC FRLSH insulated cable for 15 amps socket point on independent board controlled by one switch, complete all as specified and directed.
S&F Modular Switch flush type 6 Amps single pole, one way complete all as specified.
S&F Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush type complete all as specified.
S&F Modular Bell push flush type, 6 Amps complete all as specified.
S&F Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified.
S&F Modular Switch 16 Amps single pole, one way complete all as specified.
S&F Modular fan regulator step type, 2 module type complete all as specified.
S&F Bell, ding dong type, AC 230 Volts, single pole complete all as specified.
S&F ceiling rose surface bakelite three terminal complete all as directed.
S&F lamp holder insulated body with back plate for batten fittings complete all as directed.
S&F LED bulb of 7 watt, Of base B-22, suitable for fixing in lamp holder. complete all as specified.
S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient high transmissitivity diffuser, high lumen ouput 230 volts and intregrated electronic driver connector block etc. complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Havells Cat Part No LHEXBLP7PN1W022 or its equivalent approved in Philips, Wipro.
S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make : Havells Cat Part No LHEXACP7IN1W010 or its equivalent approved model in Wipro, Philips.
S&F Surface/ Recessed mounted LED panel 15 W, slim, compact round LED panel of 15 W plastic body with premium diffuser to ensure glare free & even distribution of light complete all as specified.
S & F for Decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base and including fixing of LED bulb 10 watts complete all as specified and as directed. Make : Havells Cat Part No LHFOAJE1TZ1I060 or equivalant approved.
S & F for LED luminaire 600 mm x 600 mm square LED panel 35/36 watts, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge. Make Bajaj cat part No 35/36 BZRSQL 36W GZ1 NW Neutal White or equivalant approved complete all as specified.
M&L for Sub main wiring in repairs with two runs of single core PVC FRLSH insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC FRLSH insulated unsheathed 6.0 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall complete all as specified Note:- Two runs of 6.00 sqmm cable, one run of 6.00 sqmm cable and one run of PVC conduit will be measured as one unit.
S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified.
S&F MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge. Make : Indoasian or equivalent approved in Crompton/ L&T/ ABB/ Scheider
S&F MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge. Make : Indoasian or equivalent approved in Crompton/ L&T/ ABB/ Scheider
M&L for single pole and neutral encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified and directed.
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for Bldg security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat Part No ENXT P 24L WH CR PC SD (Edge plus series) or its equivalent approved in Philips, Wipro.
S&F MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 125 to160 Amps Adjustable type with breaking capacity 36 KA complete all as specified.
S&F plastic body exhaust fan, AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. Make : Havells Model Ventil Air-DX White or equivalent approved in Crompton/ Almonard.
S&F modular TV socket as following:- (a) TV socket 1 module Make : Havells Cat Part No AKOKTOW061 Nos (b) Modular with plate for TV socket 01 No (c) Plastic/ Metal type flush boxes for 01 module jack
Taking down carefully serviceble KWH Electric Meter single phase any type and re fixing the same after complition of the work with wooden rectangular board making good the disturbed surface of walls and floors etc complete all as specified.
S & F Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks complete all as specified.
Supply and fix wall fan single phase, 230 Volts having nominal air flow capacity of 90CMM power 110W and size 400mm complete with all accessories. Cat Part No 250890 of Bajaj or equivalent approved.
(Ser No 140 contd..) Incoming : MCCB 160 A, 4 pole, 25KA-1 No. including CTs (160A/5A,5VACI.1-03Nos), Multifunction meter, Phase indicating lamps & control fuses terminal block 2/32- 06 Nos Bus Bar : Copper strip busbar rating 250A of size for Ph 12 x 10mm, N&E 12 x 5mm and short circuit capacity 30ka, with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 05 Nos Outgoing : Separate cubical chamber with a cable alley not less than 300mm width for installation/ connecting the following switch gear: (i) MCB, 40A DP Amps, 240 volts, ‘C’ curve, 10 KA - 16 Nos Note :- Terminal block 10 sqmm -40 Nos.
M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate No 3 of SSR Part-I including excavation and earthwork in any type of soil/ strata and testing on completion. Note :- GI earth wire 4mm dia and 15mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.
S&F LED tube light fittings 1 x 9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and directed.
S&F LED Bulk Head luminaire 13.5 W, pressure die cast housing with IP65 protection complete with electric connection & all necessary fixing arrangement complete all as specified.
S&F (in building peripheri) energy efficient, LED 30 Watt Street light with best class design & Robust heat sink along with class leading IP, IK, & surge protection goe Long lasting performance complete with conncting wire and provision of GI bracket, clamp, nuts, bolts grounded in wall incl all fixing arrangement complete all as specified.
M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC FRLSH insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note :- Two runs of 4.00 sqmm cable, one run of 4.00 sqmm cable and one run of PVC conduit will be measured as one unit.
S&F double door SPN DBs 8 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified.
S&F 415V 10KA 'B' curve miniature circuit breaker (MCB) of 63 Amps 4 pole and current carrying capacity in the DB complete withconnection testing and commissioning complete all as specified.
Sppply & Laying XLPE insulated, armoured, electric cable of size 16 sqmm 4 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed.
Supply and fixing GI pipe light grade 50mm bore in short lengths, to walls/ poles/ pillers including cutting, chasing and fixing one end on walls/ pillers/ in ground for garden light fittings/ gate light complete all as specified and directed.
Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.
Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M & L for clean and dry sand (un-washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed. (Note :- Punned thickness shell be measured)
M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed (Note :- Punned thickness shall be measured).
M/s Shree Ganesh Traders
JYOTI ENTERPRISES
M/S Ashish Construction
SATHI ENTERPRISES
Goyal Construction
sunway associates
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .