Partial Shifting of 11 kV and LT Line at Madiyaon Sitapur road NH-24A PWD near chandra hospital Lucknow under under jurisdiction of EE, EUCD-I, LESA, Trans Gomti, Luknow

Amount

Safe loading & carriage including unloading & proper stacking of following store materials from ESC Daliganj/JE store to site of work.

11 KV 3x185 sq mm XLPE Cable

11 KV 3x185 sq mm XLPE St/Th J/Kit

11 KV 3x185 sq mm XLPE O/D J/Kit

ABC Conductor (3x120+1x5+1x16)

ST Pole 11 Mtr Long (Galvanised Bottom)

ST Pole 9 Mtr Long (Galvanised Bottom)

11 KV Disc Insulator T&C Type 45 KN

11 KV Disc fitting T&C Type 45 KN

11 KV Pin Insulator

11 KV Pin with Nut

MS earthing rod 20x2500 mm

M.S. Angle Iron 65x65x6mm for Cable Dropper

M.S. Angle Iron 65x65x6mm Bracing. 2 no. 4300 mm

MS angle 65x65x6MM 5.8 kg / Mtr.

M.S. Channel 100x50 sq mm 10 kg / Mtr.

Stay wire 7/10

LT PVC Cable 1x240 sq mm

3 Phase Distribution Box

Fabrication & erection of 11 KV cable exposure type double pole with the provission of cable with fixing of necesory clamps and other acessories like danger board,number plate,barbed wire,2 no. channels 100x50 mm (1600mm each),1 no.MS channel 100x50mm(3200mm in length) for supporting the hoisting of cable & poles. Painting of double pole with one coat of red oxide & two coats of enamel paints (ISI mark). Its grouting in ratio 1:4:8 & plinthing 300 mm above ground level(all material to be arranged by contractor except steel,pole,,pin & pin insulator).as per RESPO norms.

Fabrication, erection of double pole for end terminations with one side cable exposure for 11 KV line on 11 M long ST Pole with fixing of necessary clamps & other accessories like 1 no. top channel 100X50 mm - 2.24 M. 1 no. Guarding Angle and X bracing etc. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark) (all material arranged by contractor except steel,disc insulator,& pole).as per RESPO norms.

Fabrication & erection of single pole for LT line on 09 M long ST pole with fixing of necessary clamps & other acessories like clamp hook,dead/suspension clamp,neutral clamp,ABC pressure clamp and danger board with clamp.Its gouting in ratio 1:4:8, plinting 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint ISI mark etc.(all material to be arranged by contractor except steel & pole).

Erection of single stud pole to support one ST pole 9 / 11 M long with fixing of necessary clamps,barbed wire and other accessories required for erection.its gouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide two coats of enamel paint ISI mark.(all material arranged by contractor except steel & pole).

Nozeling ,winding & grouting of stay set. (All the civil material & stay set will be arranged by the contractor except stay wre).

Temporary laying of 11KV 3x185 sqmm cable.

Laying of single ckt.11 KV 3x185sqmm XLPE cable for arrangement at site requirement .

Dismantling and rerolling of temporary laid 11 kv 3x185 sqmm XLPE cable.

Laying of 11 KV 3X185 Sq. mm XLPE cable.

Double Ckt Cable laying in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. The two cables should be seprated by a partition of single bricks (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable)

Cable laying by dirll method single circuit with HDPE Pipe 100mm

In RCC pipe single circuit.

In MS pipe single circuit.

Cable laying by dirll method Single circuit

Dismantling of 33 kv,11kv line & T/Fs and its dump at suitable place on site up to complition of work and its safe loading/unloading/weighing carriage (except broken PCC pole) from dump site to je"s store/ESC daliganj .

PCC pole

ST Pole

ACSR mix conductor

Steel material

Hoisting of 11KV 3X185sq.mm XLPE cable on double pole with MS pipe of size 4" dia 3 M long including its jumpering complete with clamps, nuts and bolts(all material arranged by contractor).

Stringing,Sagging,winding and jumpering of LT line with AB Cable conductor as per RESSPO Norms.(AB Cable provided by deptt and balance material like holding clamp,eye hook,suspension clamp and dead end clamp arranged by contractor.)

High Pressure testing of 33/11 KV 3X300/185 Sq. mm. XLPE cable. Testing equipment will be arranged by the contractor.

Dismentling of LT connections of consumers on existing poles.

single phase-2 wire

Three phase-4 wire

Reconnect of all LT consumers cable with single phase 2-wire & three phase 4-wire cable (all material arranged by contractor aprx.Rmt cable provide).

single phase-2 wire consumer

Three phase-4 wire consumer

Fabrication & installation T-off / top channel using ms.channel (100x50mm) on exsting S/S type double pole / double pole / single pole & making busbar/Section with help of with help of pin & pin insulator if required.(all material provided by Contractor ).

Fixing of earth rod as per norms,for earthing of supportl (Earthing rod provided by Deptt .)

Installation of LT distribution box on LT pole with connecting by ABC

providing ,Fixing and grouting of cable marker on cable route.

ARIHANT ELECTRIC COMPANY

A.A. ENGINEERING CO.