Providing and fixing chain link fencing 1.65 m high with gate Main gate and wicket gate 1 No. each around plantation 4 hect. at Dongaon in Survey No 54, Gat no 109, in Karjat T Range Tal. Karjat Dist. Ahilyanagar in Ahilyanagar Forest

Item No. 1 Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete. (Details As per Estimate)

Item No. 2 Excavation for foundation in earth, soll of all types, sand, gravel and soft murum, Including removing the excavated material up to a distance of 50 m, beyond the bullding area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto1.5 m.) (Details As per Estimate)

Item No. 3 Excavation for foundation in In Hard murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering. preparing the bed for the foundation and necessary back filling. ramming, watering Including sharing and strutting etc. complete. (Lift upto 1.5 m.) (Details As per Estimate)

Item No. 4 Providing and laying Cast in situ/Ready Mix cement concrete in M. 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping. compacting, roughening them if special finish is to be provided. finishing it required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete. With natural sand/VS.I. quality Artificial Sand (Details As per Estimate)

Item No. 5 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting. fabricat ing hoisting, erecting, fixing in position, making riveted /bolled/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (Details As per Estimate)

Item No. 6 Providing & erecting 1.65 m high Chainlink with 10 guage thick having hole size 63mmx63 mm (10 Guage) including transportation & Fixing at proper position etc supported on M.S.angle post of size 50 mm x 50 mm x 6 mm at 2.50 m. c/c etc. complete. (Excluding Cost of M.S.angle past of size 50 mm x 50 mm x 6 mm) Rate as per Rate Analysis (Details As per Estimate)

Item No. 7 Providing and laying in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip, grillage foundations and footings of R.C.C columns and steel stanchions including balling out water manually formwork. compaction and curing roughing the surface if special finish is to be provided (Excluding reinforcement and structural steel Including cover Block) (Details As per Estimate)

Item No. 8 Providing and laying Cast in situ/Ready Mix cement concrete M-20 Cum of trap/granite/quartzite/gnelss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering. formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drurn Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete, With natural sand/V.S.I. quality Artificial Sand (Details As per Estimate)

Item No. 9 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including cent ering, formwork, cover blocks, laying /pumping, compactionand rough ening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.J. quality Artificial Sand (Details As per Estimate)

Item No. 10 Providing and fixing in position Reinforcement of various diameters MT for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies. coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed. (Details As per Estimate)