Improvement of Water Supply Scheme Dan Singh Wala Block Bathinda District Bathinda under 2AI

Carriage of Surkhi, sand, bajri, ballast, stone, boulders, kankar, building rubbish Carriage of material excluding initial lead of 5 Km a) Jalalabad Sand (Av. Lead 90 Km) Up to 40 km (Item No. 5.2 (i))

41 km to 60 km

61 km to 90 km

b) Gagger Sand (Av Lead 290 Km.) Up to 40 km

41 km to 60 km

61 km to 150 km

150 km to 290 km

b) Bajri (Av Lead 290 Km.) Up to 40 km

41 km to 60 km

61 km to 150 km

150 km to 290 km

c) Filter Media (Av Lead 290 Km.) Up to 40 km

41 km to 60 km

61 km to 150 km

150 km to 290 km

Removing Doors and windows with chowkhats by making recesses in walls when the wall is not to be dismanteled. a) doors of area 3 sqm and below. (Item No. 8.26)

b) windows of area 3 sqm and below.

Scraping c) Cement Plaster (Item No. 8.31)

Cement Concrete 1:2:4 with stone ballast. Or shingle. (Item No. 10.12 ii))

12.5mm C.P. 1:2. (Item No. 15.7)

12.5mm C.P. 1:4. (Item No. 15.9)

Plastering on underside of ceiling 10 mm thick cement plaster 1:3. (Item No. 15.43)

Cement Pointing 1:2 deep Veriety. (Item No. 15.59)

Cement Pointing 1:2 flush on flat brick flooring. (Item No.15.67)

White washing three coats. (Item No. 16.3)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. (Item No. 16.14)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. a) With Special Quality Paint (Item No. 16.18)

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (Item No. 16.21) a) with Special Quality Paint

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. a) Panelled, glazed or glazed and panelled (Double leaf) ii) 35 mm thick (Item No. 17.10 (iii)

Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge thick steel sheet of the specified section (standard design latest) including iron lugs iron hinges, confirming to PWD specifications including bolts for fixing stops, lock etc. complete. a) Doors and windows frame of size 118 mm x 60 mm wide single rebate weighing 3.43 kg per meter. (Item No. 18.24)

Brick lining 7.5cm thick in 1:3 cement sand mortar over 12.5 mm thick baseplaster 1:6 over dressed sub-grade including laying, trenching and jointing of low density polyethylene. On Side Slope (Item No. 19.27 (b))

Providing & fixing CI/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts slucie valves ISI marked, 14846-2000, including jointing, testing & cost of Nut, bolt & insertion sheet all carriage complete (with the approval of Engineer-in-charge). A) Class PN-1 as per ISI (Item No. 28.27) b) 100mm i/d Sluice Valves Flanged

c) 150mm i/d Sluice Valves Flanged

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :- a) Top layer :- Fine sand screened, cleaned ans washed and graded (effective size 0.2 to 0.4 mm with uniformity co-efficient 2.00 to 3.00) from Pathankot or other approved source. (Item No. 28.51))

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible/monoblock to be fixed on existing panel for OHSRs complete in all respects. (Item No. 28.90)

First class brick on edge paving or flooring laid over and in cement sand mortar 1:5 in ordinary bonded courses or in herring bone or other special courses, to templates, over dressed foundation and to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be filled with mortar and struck flushed as the work proceeds. (Item No. 29.29)

Supplying and fixing 200mm i/d Galvanized iron sheet floating arm 5.20 mtr long including sluice valve, survivel bend, floating drum, extended rod with hand wheel. (Item No. NS)

Silt Clearance of S&S Tank. (Item No. NS)

Providing & Fixing Orient Electric Apex-FX 1200mm Ceiling Fan (White) & Regulator etc. complete. (Item No. NS)

Providing & Fixing Crompton Slim Ray 18-Watt LED Tube Light (Cool Day Light) complete. (Item No. NS)

Providing & fixing Syska SSK-SRL 15W B22 LED Bulb (Cool Day Light) Complete. (Item No. NS)

Provision for Footpath Main Gate to Pump Chamber complete. (Item No. NS)

Taking out filter media (top to bottom layer) from filter beds, washing & replacing the same after washing in filter beds etc. complete in all respect. (Item No. NS) a) Top Layer

b) 2nd Layer

c) 3rd Layer

d) 4th Layer

e) Bottom Layer

Washing the false floor slabs with brushing & cleaning the cross drains etc. complete in all respect. (Item No. NS)

Providing & fixing Jalli of OHSR 25 Cum capacity. (Item No. NS)

Dismentaling existing un-serviceable measuring Gauge & placeing the same near pump chamber at site etc. Complete. (Item No. NS)

Dismentaling existing steel ladder from water tank of OHSR 25 cum capacity & placeing the same near pump chamber at site etc. Complete (Item No. NS)

Providing & fixing Aluminium Ladder inside the tank should consist of 60 cm wide ladder make from aluminium section LS 974 size, 66.68 x 31.75 x 4mm, weight 1.27 kg/mtr with steps made out of aluminium section H, SP 3024 Size 35 x 16.70 x 1.60 mm, weight 0.362 kg/mtr to be fixed one side in the top dome and other side in the bottom dome including liffiting from ground to vessel of the OHSR 25 Cum capacity etc. (Item No. NS)

Providing, Laying,Fixing & Jointing of P . V. C Pipes 6 Kg f/sqm ISI Marked as per ISI- 4985 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.including specials & excavation for pipe line in trenches and pits upto required depth and cover on pipe minimum 1 mtr. with earth etc. complete in all respects. a) 63 mm o/d

Providing house hold connection without water meter laying, jointing, fixing, testing MDPE Pipes (as approved by Engineer-in-charge) including cost of excavation, refilling water meter, CI bib cock as per IS : 210 with stainless steel spindle, 20mm i/d MDPE Pipe 2.00 mtr. 15mm i/d GI Pipe 2.50 mtr.(length on average basis) 3" i/d clamp, GM Ferrule ISI marked connection of 15 mm i/d ferrule midium specials such as tees, bends, sockets, elbows, nipples (100 mm & 150 mm) union couplings, GI hooks etc. & gun metal peet valve (heavy pattern) with hand wheels on MDPE Pipe lines laid in the ground or inside buildings, cutting, threading, making hole in wall and testing in treanches in the ground all materials should be approved make (to the approval of Engineer-in-charge) Complete Job in all respects including cost of carriage. (Refer CSR item No. 28.34b, 30.65b, 28.40a, 28.43a, 28.46) (Item No. NS) No. of Connections on existing Pipe Line

Repair of existing Connections (Item No. NS)

No. of Connections on Proposed Pipe Line (Item No. NS)

Provision of painting / Installation of Sign Board for Water supply scheme (Item No. NS)

Credit for old material i.e. existing Sluice valves