Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.2 LAccepted-Finance | L1 | Accepted-Finance being 1st lowest | |
| 2 | L2₹6.8 L+₹65,160 (10.5%)Accepted-Finance | L2 | Accepted-Finance being 2nd lowest |
Tender Value
₹6.6 L
EMD Value
₹13,250
Closing Date
2 Jan 2024, 3:00 pmClosed
EE, CD-III,APWD. PROTHRAPUR
O/o EE, CD-III,APWD. PROTHRAPUR
Construction of 2Nos semi arched poly house size 300Sqm each at seed multification farm, Chouldari
2023_APWD_12762_1
NIT NO. 39/EE/CD-III/2023-24
Open Tender
Civil Works - Others
Works
120 days
Chouldari
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹13,250
3 Jan 2024
22 Dec 2023
3 Jan 2024
23 Dec 2023
2 Jan 2024
23 Dec 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Coupler
Single tee without door
110 mm bend
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
20 mm nominal dia Pipes
25 mm nominal dia Pipes
40 mm nominal dia Pipes
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and laying solid cement concrete block walling consisting of solid block of size 400 x 200 x 200 mm of mix 1:3:6 (1 cemnt: 3 coarse sand and 6 graded ston aggregates 10mm nominal size) laid in cement mortar 1:6 (1 cement and 6 coarse sand) upto floor five level.
Providing and fixing 200GSM anti fungal UV treated poly film of approved quality and make and fixing it on the roof as per the requirement.
Providing and fixing UV treated 40mesh insect proof nylon net of approved quality and make and fixing it on the gable side and wall area.
Providing and fixing 3mm wide of aluminium channel and zig zag spring and fixing it with UV films as per requirements.
Providing and installation of single phase 11A, 220V 50hz electric semi atuomated starter of approved make and as per the requirement.
providing and installation of HDPE super flow screen filter having capacity to flow 12cum per hr.
Providing and installation of PVC 28 PH mini sprinkler with adapture.
Providing and installation of fogger assy having capacity 28LPH.
Providing and fixing CPVC union socket in pipes with one step CPVC solvent cement.
20mm nominal bore
25mm nominal bore
40mm nominal bore
Providing and installation of 16mm LDPE leteral pipe with all fittings and accessories for fixing fogger assy.
Providing and fixing of 1HP hi flow pump of approved make and model with suction and delivery 25x25 mm including PVC suction pipe with fittings.
Providing and fixing of MSP ball valve of approved make and quality, and make on the main line 40mm dia.
SONA MONA TRADERS
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .