SPECIAL REPAIR TO BLDG No T-47

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and removed rubbish off the premises complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified & directed.

Cutting openings, through brick/stone walls for door, window and other openings or enlarging existing openings, converting window into door openings,etc or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc and rubbish exc 50m, complete all as specified and as directed.

M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work with CM (1:4) or cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary use and waste of formwork complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with with sub class 'B' bricks, straight orcurved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

Cutting out bricks, forming toothing for, and bonding new into old work with CM (1:4) including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregates) as sub bases of floors and finished the surface even and rough to receive the topping layer complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graged stone aggregates) as in floors complete all as specified and directed..

M&L for 75mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in plinth protection surface finished even & smooth using extra cement providing with construction joints 10x20 mm filled with bitumen and sand mortar 1:3 complete all as specified and directed.

M&L for reinforcement cement concrete 1:2:4 type B1 Nominal mix (using 20mm graded stone aggregate) as in chajjas / landing slabs/platform etc including use and waste form work and necessary scafolding up to height 6 mtr complete all as specified and directed.

M&L for 10mm dia and over mild steel TMT, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for ultra charged coloured vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Srl item No.15 above but as in dado / skirting laid over and including 10mm thick rendering in CM 1:4

M&L for joint free non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.06 Sqm but not exc 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.42 Sqm but not exc 1 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.42 Sqm but not exc 1 Sqm as in vertical surfaces such as skirting/dado laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles complete all as specified and directed.

M&L for joint free glazed ceramic coloured pattern tiles of size 600mmx300mmx7mm to 8 mm thick as in vertical surfaces such as skirting/dado laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removed of rubbish off the premises complete all as specified & directed.

M&L for rendering 20 mm thick on stone masonry surfaces or surface other than fair faces of brick work or concrete surfaces in cement mortar (1:6), finished the surface fair and even complete all as specified & directed.

M&L for cement plaster in two layers on stone masonry surfaces or surfaces other than fair face of brick work ,first layer 15 mm thick in cement mortar (1:6) and second layer cement plaster 10 mm thick in cement mortar (1:4) with & including WPC @ 3% by weight of ement, finished the surfaces fair and even complete all as specified & directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness and any description, including cover fillets etc, complete all as specified.

S&F 600mmx600mmx4mm thick ‘E’ Board Classic (Make-Everest industries Ltd or equivalent make as approved by GE) Design Lake & hill as in false ceiling including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/steel purlin /rafter for suspending grid frame work of size 605mmx605mm suspended with 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed

M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed . Make:- Asian ACE or equivalent make as approved by GE

M&L for preparation of newly plastered surfaces of wall and applying two coat of enterior Acrylic emulsion over a coat of alkali resistant primer over Birla/JK white wall care putty min 3 mm thick over plastered surface to prepare the surface even and smooth complete complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying two coat of enterior Acrylic emulsion over a coat of alkali resistant primer over Birla/JK white wall care putty min 3 mm thick over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for complete removal of existing treatment on walls and prepration of old surfaces and applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer incl. properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 sqm but not exc 4.0 sqm each, complete all as specified and directed.

S&F Solid PVC frame (single rebated) of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS Square tube complete all as specified and directed.

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face including 03 Nos of SS Butt hinges 100 mm size complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specified and directed.

S&F powder coated anodised aluminium door shutters consists of top rail size is 84.45x44.45 mm , bottom rail & lock rail size is 101.80 x 44.45 mm & style of door shutter is 83mmx 44.45 mm glazed with 5mm thick tinted /frasted glass of approved make with handles 2 Nos of 200 mm long in each door , 04 Nos 100 mm SS hinges has fitted on frame as required fixed with rubber gasket & aluminum beading, any No of panels with aluminum handle ,locking arrangement, hydraulic door closer designation No. 2, universal type, floor door stopper including necessary joining cleats , glazing clips etc complete complete all as specified. (Note:- Thickness of aluminium section shall not be less than 1.5 mm)

S&F powder coated anodised aluminium ventilator shutters, half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion, aluminium sections weighing 0.55 kg/m complete all as specified and directed.

S&F Winpire 3 track pre painted steel sliding window 3-track, 2glass panel and 1 mesh panel ,sliding window fabricated from roll formed section made of galvanized steel colour coated/powder coated (base steel as per IS 513 D quality galvanized as per IS 277 with Zinc of 120gm/sqm ) with total coated thickness of 0.58mm primer coat with epoxy primer of 5-7 micron thick ,finish painted with a polyester paint of 12-16 micron thick and back coated with alkyd backer of 5-7 micron or powder coated with pure polyester up to 50-60 micron thick. section for external frame should be of 107X44 mm, section of shutter should be of 35 x 49 mm. section of mesh should be 35 x 49 mm . the window should be paneled with 5mm thick plain flot glass and stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.18mm. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM) . The sections are to be cut to length, join and assembled by means of corner bracket including S&F stainless steel grill out side of window (weight not less than 2.5 Kg per Sqm) . The above frames should be fixed to the concrete/brick masonary wall by means of self expanding screws. all as specified and directed. (Make: NCL ALLTEK & SECCOLOR LTD or equivalent make as approved by GE)

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 200mm and fixed with machine made screws complete all as specified & directed.

S&F extruded aluminium alloy handles 125 mm size, fabricated type anodised, fixed with machine made screws complete all as specified & directed.

S&F 25 mm bore stainless steel conduit curtain rods, suitable for door/widows curtain with fancy type SS dooms with brackets fitted to each end and fixed to wall and making good the disturbed surfaces complete all as specified and directed.

M&L for 18mm to 20mm thick pre-polished Granite slab, machine cut, for floors/ shelves,cooking platforms window cill, steps, jambs and pillor top laid over 15mm thck CM 1:4 cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Granite stone complete all as specified and directed..

Rounding to edges of stone slabs one edge, such as in steps, cooking platforms window cills and other similar situations complete all as specified and directed.

S&F second class hardwood plain, solid stright chowkats and frames, wrought, framed rebated on the solid, rounder or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 18/19 mm thick pre laminated paticle board, as in cupboards, kitchen cabinets, shelves, pelmets, etc., exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work with alaround wooden lipping cut to required size and fixed to frame complete all as specified and directed.

S&F 100 mm long Hasp and Staple, safety type Aluminium with MS hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F continuous (piano) hinges, width of flaps (when open)- 30mm mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repair single piece white ceramic glazed wall hung/wall mounted water closet of size 500mmx370mmx375mm and cancealed cistern flush tank 80mm thick with plate including slow motion seat cover ,CP rack bolt-screw pair, inlet&outlet rubber gaskets weigth not less than 20kg complete all as specified and directed (Make : Brand Generic, Jaquar or equivalent in Cera )

S&F vitreous China under counter basin (Wash basin) oval shape size 190 x 550 x 430mm with brass coupling and suitable Outlet PVC waste pipe complete all as specified and directed (Make : Jaquar Florentine series FLS-WHT-0401 or equivalent in Cera)

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F as in repairs Single lever basin mixer without popup waste and 450 mm long braided Hoses suitable for 15 mm bore iron pipe complete all as specified and directed. Make:-Jaquar Cat No ARI-39001B or equivalent in Cera.

S&F in repair Wall mixer with telephonic shower arrangement (excluding hand shower), connecting legs and wall flanges but without crutch & telephonic shower complete screwed for iron pipe bore dia 15mm complete all as specified and directed. Make :Jaquar Cat No FLR 5217N or equivalent in Cera

S&F in repair hand shower 105 mm Round shape multi flow with air effect (ABS body with face plate white matt ) with Rubit cleaning system complete all as specified and directed. Make :Jaquar Cat No HSH 1721 or equivalent in Cera

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F as in repair C P Multi bib tap 2 in 1 , cast copper alloy fency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.

S&F as in repairs overhead shower 120mm round shape single flow (ABS Body chrome plated with Grey face plate) with Rubit cleaning system Make : Jaquar OHS-1789 or equivalent in Cera

S&F brass (CP) sink mixer with regular swinging spout (wall mounted) 15 mm bore , with connecting legs and wall flanges , fixed in repair , complete all as specified and directed

S&F in repair 15 mm dia Angle cock external threaded, chromium plated ,screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for uninos complete all as specified and directed..

S&F PVC connections 15mm size with brass nuts of length 450mm long complete all as specified and directed.

S&F 16 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 all fittingss and fixed to wall & ceiling or laid in floor including taking down 15 mm dia GI tubing and connection complete all as specified & directed.

S&F 20mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 all fittingss and fixed to wall & ceiling or laid in floor including taking down 20mm dia GI tubing and connection complete all as specified & directed.

S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls complete all as specified & directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with mild steel clampscomplete all as specified & directed.

S&F PVC (SWR) bends 110 mm dia with access door complete all as specified & directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified & directed.

S&F PVC (SWR) bends 75 mm dia with accessable door complete all as specified & directed.

S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with access door complete all as specified & directed. .

S&F PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified & directed. .

S&F 110mm bore PVC (SWR) vent cowl complete all as specified & directed.

S&F 75 mm diameter PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified ans directed.

M&L for concealed point wiring in stone/brick wall for the following with 1.5 Sqmm PVC-FRLS insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead including taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed:-

For one light, fan point controlled by one switch complete all as specified and directed.

For one call bell point controlled by one push button switch complete all as specified and directed.

For one 5 Amp independent socket point controlled by one switch complete all as specified and directed.

For one 3 pin ,5 Amp socket point with other switch on the same board complete all as specified and directed.

For one light, point controlled by two way switch complete all as specified and directed.

All as per Srl item No.73 here in before but for power point wiring using with 2.5 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead including taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed

S&F Modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed

S&F Modular switch, two way, 6 Amp 230, 1 module complete all as specified and directed .

S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed .

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed .

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting with 9 watt LED bulb complete all as specified and directed

S&F modular fan step regulator 120W, 2 module complete all as specified and directed

S&F modular bell push 6A ,1 module complete all as specified and directed .

S&F call bell AC type 230 Volt open recessed type of suitable covered with hylem sheet complete all as specified and directed .

S&F testing and commissioning of MCB SP 6-40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed .

All as per Srl item No.85 above but SPN 40 - 63 Amps, 240 V.

S&F in replacement sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed .

S&F in replacement double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 125A MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bar complete all as specified and directed

S&F in replacement MCCB 125 Amps 4 pole, 415 V 16 KA complete all as specified and directed

S&F in replacement LED TL fitting 20 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed . Make:-Bajaj cat part No BCLSB 20 WH/ CG Cat part No LCTC-18-CDL

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 2009 specification.

S&F LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed Make:- BAJAJ cat part no BIBWP10WLED /CG cat part no LBHE-10-CDL.

Taking down and refixing connecting of Ceiling fan and exhaust fan after, greasing complete all as specified and directed

Taking down and refixing connecting electric meter SP up to 40 amp incl S & F suitable board close recessed type of suitable size complete all as specified and directed

M&L for concealed sub main wiring with 2 single core PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green complete all as specified and directed

M&L for concealed sub main wiring with 2 single core PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green complete all as specified and directed

S&F in replacement box type LED optic fitting 1x9 Watt 2 feet box type complete. Make:Havellls /Wipro/CG ll as specified and directed by Engr -in -Charge . Make:-Bajaj cat part No BCLSB10WH/ CG Cat part No LCTL-9-CDL

S&F exhaust fans AC single phase 230/ 240 V of size 250 mm sweep PVC body with all accessories including making hole in stone /brick wall grouting &making good in all aspects all as specified and directed. Make - Havells TURBOJET/Bajaj MAXX AIR/Crompton EXHD300-6-1.

M&L electric water heater (Geyser) ISI marked 25 Ltrs capacity AC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make - Havells (QUATRO) Cat part No AGHWEQTT 025 or BAJAJ (CALENTA) Digi 25L Code No 150764.

S&F sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed

Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 70 sqmm 3.5 core complete all as specified and directed

Excavation in trenches in soft/ dense soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out complete all as specified and directed

Returning, filling, including spreeding leveling watering and well ramming in layers not exceeding 25 cm apart complete all as specified and directed

Removing of surplus excavated soil to distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtrs above the starting point complete all as specified and directed

M&L for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed

M&L for bricks sub class'B' laid dry in trenches over the cable adjoining each other widthwise for cable protection complete all as specified and directed

S&F in position galvanized iron pipe 50mm bore light grade fixed to pole with mild steel clamps of required size or laid through wall/under floor/under road/in trenches complete all as specified and directed

Pandey Construction and Engrs

m/s mohansingh

M/s Vinod Kumar Korpal, Sagar

siddhant construction

maharaja construction and suppliers