Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 CrAdmitted-Finance | ₹4.4 Cr | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | S K Construction L1 |
|---|---|---|---|---|
| 1.00 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area | 20 | 100 Sq.m | - |
| 2.00Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and with all lifts of disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : | ||||
| 2.10 | All types of Ordinary rock including all types of
laterite rock, blasting prohibited | 1,362 | Cu.m | - |
| 3.00 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. | 1,211 | cu.m | - |
| 4.00 | Supplying moorum and filling in pipeline/foundation trenches, plinth, plinth sides, foundation etc.in layers not exceeding 20 cm depth consolidating each layer ramming and watering with all leads and lifts including disposal of surplus earth etc complete and as directed by Engineer in Charge. | 465 | cu.m | - |
| 5.00 | Disposal of surplus earth excavated material from the site with a lead of 10 kms including all loading & unloading charges (a) by tipper ruck including loading unloading and stacking .contractor should arrange land for dispose up these material at his own cost with lead upto 10km. | 441 | cu.m | - |
| 6.00Half brick masonry usign fly ash bricks in cement mortar 1:3 (1 cement : 3 coarse sand ) with bricks of class designation 40 kgs / cm2. | ||||
| 6.10 | Above plinth upto floor V level 200 x 95 x 95 | 212 | sq.m | - |
| 7.00 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. | 143 | cu.m | - |
| 8.00 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and basement. | 268 | cu.m | - |
Tender Value
₹3.5 Cr
EMD Value
₹7.1 L
Closing Date
23 Jun 2020, 2:00 pmClosed
Executive Engineer
Works Division III, WRD, Ponda, Goa - 403401
Construction of Multi-Purpose Cyclone Shelter in Survey No 134/1 of VP Sancoale in Mormugao Taluka, South Goa
2020_GOA_560278_1
NCRMP II/GOA/NCB/MPCS/PKG06
Open Tender
Civil Works - Buildings
450 days
Zuarinagar
As per Bid Document
7 documents required · 7 mandatory
₹6,000
Payable To Executive Engineer, WD III, WRD, Ponda
₹7.1 L
Yes
2 Jul 2020
22 May 2020
23 Jun 2020
22 May 2020
23 Jun 2020
22 May 2020
22 May 2020 - 8 Jun 2020
Amount
Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and with all lifts of disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :
All types of Ordinary rock including all types of laterite rock, blasting prohibited
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
Supplying moorum and filling in pipeline/foundation trenches, plinth, plinth sides, foundation etc.in layers not exceeding 20 cm depth consolidating each layer ramming and watering with all leads and lifts including disposal of surplus earth etc complete and as directed by Engineer in Charge.
Disposal of surplus earth excavated material from the site with a lead of 10 kms including all loading & unloading charges (a) by tipper ruck including loading unloading and stacking .contractor should arrange land for dispose up these material at his own cost with lead upto 10km.
Half brick masonry usign fly ash bricks in cement mortar 1:3 (1 cement : 3 coarse sand ) with bricks of class designation 40 kgs / cm2.
Above plinth upto floor V level 200 x 95 x 95
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and basement.
Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand above foundations. from floor I level upto floor V level.
Providing & laying damp proof course 25 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg. 10 mm nominal size).
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
All works up to plinth level.
In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.
Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level (FULL CEMENT )
M-30grade of concrete
Centering & shuttering including Strutting, Propping & removal of forms for :
Foundations, Footings, Bases for columns
Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)
Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, bressumers and Lintels plinth beams not exceeding 1m in depth
Staircases (except spiral staircases) excluding landing
Suspended floors, roofs landings, shelves & their supports
Vertical or horizontal fins individually forming box louvers or projected bands
Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates
Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only
Providing corrosion resistant steel CRS-50 bars of (SAIL, TATA, VIZAG, JSW Steel Ltd. make or equivalent) (Confirming to IS 1786 if 1985) for RCC work including bending, binding & placing in position in all the floors along with factory made precaste concrete cover blocks of specified s izes whose compressive strengthis not less than that of surrounding concrete in the structural member .
Providing and fixing precast reinforced concrete door frames of ASTRA make or equivalent in M25 grade concrete and reinforced with minimum three bars of 6 mm dia and confirming to IS:6523. The frames shall be manufactured in approved factory with all the necessary arrangements for fixing hinges, tower bolts by way of inserted PVC blocks and holes for receiving sliding bolts as specified. Sectional size of frame with single rebate : 60X 100 mm
Providing woodwork in frames of doors,windows, clerestory windows trusses & other
First class matti wood
Providing and fixing 50 mm thick panelledglazed or panelled and glazed shutters for doors,windows and clerestory window including anodized aluminium butt hinges with necessary screws:
Second class Indian teak wood
frames wrought framed and fixed in positon.
40 x 3 mm flat iron hold fast 40 cm long
40 x 3 mm flat iron hold fast, 15 cm long
Providing & fixing flush door shutters decoration type core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains and cross bands and face veneers on both faces of shutters.
35mm thick including anodized aluminium butt hinges with necessary screws:
Single Colour Foam Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2008 certified factory. Accessories:i) S. S. Hinges 4” - 3 Nos,ii) S. S. Latch - 1 No,iii) Tower Bolt 5” - 2 Nos, Handle 5” - 2 Nos. Shutter thickness: (Note- For35 and 40mm thickness shutter, only frames of 5X 2 1/2 cross section frames to be used.)
FRP (Fiber Reinforced Polymer) Frames Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door.. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2008 certified company.Specified cross section
Provided and fixing chromium plated brass 100 mm. mortice latch and a pair of levers and handles with necessary screws etc. complete (Indian make of approved quality).
Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete.
Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.
Providing and fixing bright finished brass door latch with necessary screws etc complete. a) 300x16x5
Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
Providing and fixing in position S.S. hand rail in main stair case, and landing as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials, etc. complete.
Two Track sliding window (Economical) Two Track sliding window in economical section made out of 60mm x 45mm x 2.5mm Upvc multi cavity track section & Shutter made out of 57mm x 31mm x2.5mm Upvc multi cavity section welded in corners with Glass beading & EPDM Gasket & 4mm clear glass with lock & rollers. The average weight of Two Track Sliding window (Economical) is 12.25 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.
Turn Windows Single or multi shutter turn windows are made out of upvc multi- cavity frames Sections of 60mm x 60mm x 2.5mm reinforced with G.I channel and double multi-shutters Division are made by using shash mullion having 50mm x 64mm x 2.5mm multi- cavity upvc section, reinforced with G.I. channel and shutters are made out of 50mm x 64mm x 2.5mm upvc section, Reinforced and welded in corners with EPDM Gaskets and using suitable glass bead with perfect hardware like hinges, handles, stays & 4mm clear Glass. Some portion of windows can be made fixed glass. The average weight of Turn window is 11.5 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.
Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by screws.
Plain grill
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.
Providing and fixing 27.5cm long wire spring grade No.2 for rolling shutters.
Providing and fixing top cover for rolling shutters
Providing and fixing Ball bearings for rolling shutters
Providing & fixing Pre-fabricated sliding compound gate as per the drawings with structural steel of hollow rectangular/square/circular section of TATA/JSW or equivalent make including providing & fixing locking arrangemnts & applying primimng coat with ready mixed red led paint and painting two or more coats with superior quality ready mixed paint of approved brand and manufacture in all shade as directed by Engineer-in-Charge, etc complete.
Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete
25 mm thick.
Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
Jet black
Providing and fixing stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average ) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete.
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm
Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria or equivalent)conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.
Wall Ceramic Glazed Tiles : 300 x 450
Providing and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria or equivalent (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement & matching pigment etc,complete
Dark Shades
Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.
50 mm thick
Providing and laying vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria or equivalent (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete
300 x 300 mm Design - Liner
300 x 300 mm Design - Buttons
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories TATA make or equivalent)but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge
Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
12mm cement plaster 1:4 (1 cement : 4 fine sand)
6mm cement plaster to ceiling 1: 4 (1 cement : 4 fine sand)
Neat Cement punning
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
18mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) 1m long , 1 cm wide.
Providing and applying two coats of High Albedo paint having minimumSolar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer’s specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., washing with water all complete. The contractor shall give guarantee for the perfomance of SRI and also the durabitity of coating, all complete as per direction of Engineer-in-incharge.
Painting three or more coats with acrylic exterior paint of approved brand and manufacture (such as weather shield, APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. - 2 coats
Providing and applying 2 coats of Anti-corrosive, chemically resistant coal tar extended epoxy coating system for below & above waterline application (Normal Wet & Underwater Application) (EPCO-2020-TX) having an adhesion of minimum 3.0 N/mm2 (ASTM-D-4541) and a DFT of 300-350 microns in 2 coats and having excellent chemical resistance against acids, alkalies and salts. Incl. cost of transport etc. as per dir of EIC. All the chemicals will be ofKrishna Conchem Products Pvt. Ltd. or Equivalent.
Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade.
Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
Earthwork in surface excavation not exceeding 30 cm in depth (but exceeding 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in ordinary soil.
Hard soil
Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).
Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in ratio of 2: 1 by volume (2 parts or stacked volume of earth after reduction by 20% and 1 part of stacked volume of manure after reduction by 40%) flooding with water, dressing including removal of rubbish & surplus earth if any with all leads & lifts (cost of manure or sludge of extra good earth if needed to be paid for separately)(Holes 1.2m dia and 1.2m deep)
Holes 1.2m dia and 1.2m deep
Grassing with “doob” grass including watering and maintenance of the lawn for 30 days or more till the grass forms of thick lawn free from weeds and fit for moving, including supplying good earth if needed. (Cost of “doob” grass not included )
3) In rows 5 cm apart in either direction
Providing and fixing M.S flat iron tree guard 60cm dia & 2 m high above ground level, formed of 4 nos. 25 x 6mm and 8 nos. 25 x 3mm vertical M.S. flat iron rings in two halves, bolted together with 8mm dia and 30 mm long bolts inluding painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects.
Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding with water and leveling (cost of supplying earth and sludge of manure and mixing excluded).
1. Forxtail palm 3 m ht & 0.075 m atleast Girth
2. Pongamia pinnata 2.4 m ht & 0.075 m atleast Girth
3. filiciun decipiens 3 m ht & 0.075 m atleast Girth
4. Caryota urens 3 m ht & 0.075 m atleast Girth
Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) .
Providing and laying 100 mm thick factory made cement concrete interlocking paver block of M 50 grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design / shape laid in 50 mm thick compacted be of course sand. filling the joints with course sand, etc. all complete as per the direction of Engineer.
Supplying and fixing of cautionary/warning sign boards with reflective tape fixed on M.S. angles, tees as per drawing confirming to IRC-67-1977 etc. complete.60 cm equilateral triangle
Providing and fixing information boards of size (1.5x1.00)m consisting of angle iron post of (75x75x6mm) fixed in cement concrete M15 grade(45x45x60)cm, 60 cm below ground two supporting 1.5 m length of ISA (30x30x5mm) and mild steel plate of (1.5x1.0)m,3mm thick fixed to the angles by welding/bolting etc. including painting with synthetic enamel paint two coats of approved brand and shade over single coat of primer, including lettering transportation etc. complete.
Providing and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 5 litres PVC Automatic flushing cistern (of approved make) with all fittings and fixtures confirming to IS 7231 and mosquito proof couplings of approved municipal design and nylon pull complete cutting and making good the walls and floors where required
Orissa pattern W. C. Pan
Providing and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 5 lts. PVC automatic flushing cistern (of approved make ) with all fittings and fixtures confirming to IS 7231, and mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required - W.C. pan with white plastic seat and lid
W.C. pan with white plastic seat and lid
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete.
Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,
Overall size 535mmx460mm (21"x18") bowl size 460mmx380mmx200mm (18"x 15"x 8") depth 200 mm. Glossy. 1.0mm thk,
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm
Providing & fixing CP brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws a)750 x 20 mm size
750 x 20 mm size
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993
20mm nominal bore
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws
b)Plastic container
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. of 80 mm dia nominal bore. Then, fixing of water meter & stop cock in existing (PP-R/UPVC)Pipe line including cutting & treading the pipe and making long screw etc. complete
Providing and fixing brass stop cock (heavy) of approved quality :
b)20 mm nominal bore
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :
20 mm nominal bore
40 mm nominal bore
50 mm nominal bore .
Providing and fixing ball valve (brass) of approved quality :
a)High pressure with P.V.C. floats:
3)25mm nominal bore
Making connection of GI/ CI Distribution branch with GI/CIMain 50 mm to 80 mm nominal bore by providing and fixing tee including treading the pipe etc. complete
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1cement: 2 coarse sand ;4graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1cement ;2 coarse sand :4graded stone agrregate 40mm nominal size) inside plaster 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
Inside size 90 x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. )
Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : b) 150 x 100 mm size –P or S type
Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
a)110 mm dia
b)75 mm dia
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.
a)110 mm dia
b)75 mm dia
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :
a)100 mm dia
b)75 mm dia
Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door:
a)110 mm dia
b)75 mm dia
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :
a)110 mm dia
b)75 mm dia
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :
a)110 mm dia
b)75 mm dia
Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete, without door
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993
15mm nominal bore
Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993
15mm nominal bore
Providing and fixing R.P.V.C. vent cowl:
75 mm dia
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 m. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.
20 mm dia nominal outer dia pipes.
25 mm dia nominal outer dia pipes.
32 mm dia nominal outer dia pipes.
Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes SDR 7.4 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings including trenching, refilling & testing of joints complete as per direction of Engineer in charge. (External work)
PN 16 - Pipe, 50 mm OD
Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.
Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. (C) 1000 litres. Extra for placing polythene tank on roof of floor three (2nd floor roof)
Providing 8' (2.44m) high corrugated G. I. Sheet (min. thickenss 0.63mm) barricading fixed with G. I. hooks and nuts on frame made of M.S angles of minimum size 40*40*6, fixed to the vertical M.S. Channel posts with spacing not less than 3.00 meters. (average). Barricading shall be painted with signs and messages to warn people about keeping away from the construction zone. The following shall be ensured while installation: • The safety barricading should be high enough so that people (especially children) cannot climb over it. • It should be installed in a manner so that one cannot crawl underneath it. • The safety barricading should be strong enough and durable enough to withstand the elements, including high wind conditions. • Should be sturdy enough to bear normal wear and tear at the construction site and should not topple off and hurt someone. Rate shall be inclusive of cost of providing all material and fixing arrangements, including excavation, concrete and backfilling etc., removal of the complete barricading after construction work is over and rehabilitation of the site. Material of barricading shall be the property of contractor after completion the work. Barricading shall be maintained throughout the construction period.
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building.
a.Pre-construction
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Including providing and applying 2 coats of Anti-corrosive, chemically resistant coal tar extended epoxy coating system for below & above waterline application (Normal Wet & Underwater Application) (EPCO-2020-TX) having an adhesion of minimum 3.0 N/mm2 (ASTM-D-4541) and a DFT of 300-350 microns in 2 coats and having excellent chemical resistance against acids, alkalies and salts. Incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. as per direction complete.
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc., the pipe with funnel at top 3.00 mtr long with clamps for holding 25*3 mm GI flat, clamp for test links etc. the pit should be refilled with charcoal or coke and salt as required as per the Earthing Drawing provided by the Engineer-Incharge. The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. b) Watering GI pipe, 50mm, Class B, with funnel as per specs. c) Charcoal/salt as per specs. d) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with with soft black agriculture soil of minimum resistivity i/c transportation/carriage for 3.00 kms. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g) watering arrangement
Supplying and fixing of Air termination rods of 1.50 m height with base clamps for holding and all accessories as specified.
Supplying and fixing of G.I. wires as specified for flexible connections.
Supplying and laying of GI flat 25 mm x 3 mm for down conductors and earthing as specified.
Supplying and laying of GI flat 40 mm x 6 mm for Grid (mesh protection) on roof tops as specified.
Supply and fixing Flat strip holders with all accessories as specified.
Supplying and fixing Disconnecting / Testing links as specified including UPVC box and all accessories.
Supply and fixing Fleible Braided links as specified.
Testing of the entire Lightning protection system as BIS 2309 and BIS 3043.
Setting up drilling Rig on the drilling site and its shifting after completion of bore well, drilling 203/150mm.dia bore hole in all types of strata up to a maximum depth of 100mts. and collecting and supplying representative samples of all soil/rock strata encountered during drilling etc. complete. Over burden drilling 203mm.dia. and drilling through rock should be 150mm.dia.complete as per the direction of Engg in charge.
Providing 150mm (6’’).dia. G.I. pipes medium grade confirming to IS 1239(Part II)1975 or ISS 554 for casing pipe including socket, coupling etc. complete and lowering the casing pipe in the drilling holes during drilling including fixing the pipes with the socket or welding etc. complet. as per direction of Engineer in charge.
Development of bore well using air compressor air/back washing for a period of not less than two hours until all fines are flushed out and steady discharge is attended and measured the wells discharge on 90 V notch or with a barrel and stop watch.
Providing and fixing threaded well cap of cast iron/ GI suitable for 150mm (6’’) dia casing pipes bore wells complete as directed by Engg in charge.
Providing, installing, commissioning and testing of submersible pump set of max. 100/142 mm. Dia bearing ISI mark, pump confirming to IS 8034-1976 with overall efficiency of pump being more than 50% & motor conforming to IS 9283/1976 to operate on 415 volts (10%- 15%) three phase, 50 cycle/sec. 2900-3000 RPM (SYN), AC supply suitable for vertical installation in bore/tube well size of 150 mm internal dia. capable of delivering below mentioned discharges against respective dynamic head including all necessary accessories such as strainer guard pressure compensation device standard cable lead, built in non return valve pump motor coupling etc. complete. The impeller should be made of noryl/Glass filled noryl and defuses stainless steel housing and stainless steel shaft having resistance to abrasion For 120 LPM and 70 mts. Head as per direction of Engg in charge complete.
Supply, Installation, testing and commissioning of Larsen & Turbo or equivalent made control panel for submersible pump up to 7.5 HP DOL comprising of Starter with Overload relay, single phasing preventer, ammeter ,Volt meter and indicating lamp, On/Off push Button etc.as per direction of Engg in charge complete.
Providing and fixing 4mm (SWG) dia G.I. wire on surface in recess for loop earthing as required and as directed by Engg in charge.
Providing, fixing, testing commissioning of 30 amps metal clad TP&N switch fuse unit 415/500 volts with HRC fuse including drilling holes on the board Connecting and earthing the body etc as required. Category B as per the direction of Engr. In charge.
Providing, fixing & commissioning PVC sheathed submersible cable of size mentioned below suitable for 1 to 10 HP submersible pump sets conforming to IS specifications etc. with necessary cable supporting clamps (Rubberized) for gripping and connecting to switches etc. complete. a) For 82m depth of pumping
Supplying at store/site of work including railway freight, carting loading, unloading, stacking etc .galvanized mild steel continuous weld tubes conforming to IS 1239(part I)1975, with latest amendments Screwed at both the ends as per IS 554 pipe threads, one and fitted with socket other end with plastic protection ring at random length 4-7 mts. Class B e) 40mm nominal bore.
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.
All kinds of soil
Supplying Laying testing commissioning and jointing of Rigid PVC pipes conforming to ISO 4411 for Public Water supply at store or site of work including railway freight, carting, loading and unloading stacking, transit insurance etc. complete 6 Kg. sq. CM. 40 mm dia
Providing & fixing non return valve of approved quality b) 40 mm nominal bore
Making connection from UPVC pipe to PVC pipes by using suitable UPVC adopter and other materials including testing the joint etc. complete 40 mm dia
Providing & fixing cast iron splitting type bore well cap suitable for 150mm dia G.I. casing pipe having holes for inserting cable along with 2 sets of M.S. clamps suitable for 40/50 mm dia. pipes made of 8mm.thick 5 cms. wide 30 cms. long with 4 nos. of nuts and bolts etc.complete.
Providing & fixing flexible alkathine pipe 1” suitable for encasing the cables etc. complete.
Supplying of Ashirwad or equivalent UPVC, non corrosive column pipes. 90 LPM
Miscellaneous item like, Union joint, GI Nipple, GI elbow, GI socket PVC T and PVC valve etc complete for plumbing work.
With Modular Switches/ accessories :- Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in recessed PVC conduit (heavy) with modular switch modular plates, suitable size modular G.I. box of specified Category and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. c) Group C -- with Cat A Modular Accessories.
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit (heavy) of appropriate size as reqd.
a) 2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. earthwire (20mm conduit)
b) 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earthwire (20mm conduit)
c) 2 x 4 sq.mm. + 1 x 4 sq.mm. earthwire (20mm conduit)
d) 2 x 6 sq.mm. + 1 x 6 sq.mm. earthwire (25mm conduit)
Supplying and fixing suitable size modular G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connection painting etc. as reqd. (a) Cat A.
Supplying and fixing suitable size modular G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet and 15/16 A modular switch connection painting etc. as reqd. (a) Cat A.
Supply and erecting of 48 inch . (1200mm sweep) ceiling fan, double ball bearing type complete with all accessories (a) Cat A.
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate as reqd. (a) Cat A.
Installation, earthing, testing and commissioning of ceiling fan including wiring the down rod of standard length (upto 30 cm) with 1.5 sq.mm. FRFRLS PVC insulated copper conductor single core cable etc. as required.
Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as reqd. (but without MCB/RCCB/Isolator) (g) 12 way double door Cat A.
Supplying and fixing 6 A to 32 A C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc. as reqd. (a) SP, Cat A.
Supplying and fixing following rating double pole 240 V isolator in the existing MCB DB complete with connections testing and commissioning etc. as required (a) 40 A, Cat A.
S.I.T.C. of 1 x 24 w LED luminaire of approved makes like Crompton, Havells, Philips, Ge, Bajaj or equivalent.
S.I.T.C. of 2 x 20 w LED luminaire of approved makes like Crompton, Havells, Philips, Ge, Bajaj or equivalent.
S.I.T.C. of 14 W surface LED luminaire of approved makes like Crompton, Havells, Philips, Ge, Bajaj or equivalent.
S.I.T.C. of 30 W LED luminaire for area lighting of approved makes like Crompton, Havells, Philips, Ge, Bajaj or equivalent.
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part I)with latest amendments of following size 4 Core 16 sq.mm.
Supply of 2 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part I)with latest amendments of following size.
4) 2 core 6 sq.mm.
5) 2 Core 10 sq.mm.
Supplying and fixing brass batten/angle holder including connections etc. as reqd.
Earthing with G.I. earth pipe 2 mts. Long 40 mm dia medicum class with ISI mark, of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge. The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x2.0 mtrs. (min) and disposal of excavated soil. b) Class B G.I. pipe. 40mm diameter as per specifications. c) Charcoal/salt as per specs (paid seperately). d) Refilling the pit of size 1.0x1.0x2.0 mtrs. (min) with soft black soil of minimum resistivity i/c transportation. e) Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g) watering arrangement (plumbing will be paid seperately). (a) In soily strata.
Supplying and laying 25mm x 5 mm G.I. strip in 40 mm dia GI pipe from earth electrode as reqd.
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm. in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required.
Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required. (5) 4 x 16 Sq.mm.
Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required.
3) 2 x 6 Sq.mm.
4) 2 x 10 sq.mm.
Supply , installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sheet steel body (base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V AC duly tested by MRT alongwith Test Certificates, complete as required of following capacity of make L&T only (c) 50 to 100 A.
Supply , installation, testing and commissioning of wall mounted IP54 indoor Control Cubical Panel suitable for operation on 3 phase, 4 wire 440 volts 50 hz system. The panel should be flush front, compartmentalized to allow cable entry from top & bottom, dust & vermin proof complete with interconnections of proper size of wires, busbar wiring etc. The panel should be properly derusted and seven tank processed and painted with Siemens 7032 powder coated paint and constructed of 16 SWG CRCA sheets. The Panel should have indicating lamp set. digital voltmeter ammeter (VAF multifunction meter) with switches and control fuses of suitable rating and approved make. The panel should be mounted on suitable angle iron frame.The MCCB's and MCB's shall be of make L&T. Siemens, Schneider C&S or Hager makes only. The panels shall be as following:-
INCOMING
1. 63 Amps TP MCCB 25 KA in sealed meter compartment-1 No.
2. 40 Amps Cu busbar 4 striops… 1 set
3. Provision for 3 phase meter … 1 No.
4. Changeover 40 Amps 4 pole .. 1 No.
OUTGOING
1. 40 A TP MCB …. 3 Nos.
2. 16 A SP MCB …. 3 Nos.
3. Provision for 3 Nos. TP MCB's
DIESEL GENERATOR SET;- SITC of single phase 20 KVA /16 KW, Silent Diesel generating set, incorporating Diesel engine, rated at 1500 RPM with power rating 84 BHP, water cooled, four stroke, 4 cylinder with electrical starter motor 12 VDC battery with stand and leads, flywheel housing inlet manifolds and air cleaners, gear type lub oil pump, lubricating oil filter, lubricating oil cooler, fuel injection system with injection pump, nozzles, fuel filters, turbo charger, engine starting system, starter gear ring, starter motor, battery charging alternator with built in rectifier, engine protection unit for low lub oil pressure and high coolant temperature including solenoid fuel on type with engine instrument panel consisting of hour meter, lub oil pressure gauge, coolent temperature gauge, stop button, battery charging ammeter, battery charging lamp and fuse box with cooling system comprising of radiater, fan, fresh water pump including exhaust silencer, stainless steel flexible exhaust end flanges, fuel pipes, first fill of lub oil with illustrated parts list and users manual of make:- MAHINDRA NAVISTER/CUMMINS 4B3.3TAA G 11/ KIRLOSKAR/CATERPILLAR/LEY LAND/GREAVES with 20 kva coupled brushless, screen protected, self regulated, self excited. Class H insulation Alternator, operating on single phase 215 volts, rated 0.8 power factor with voltage regulation +/-1% of make LEROY SOMER STAMFORD/JYOTHI/CROMPTON GREAVES/KIRLOSKAR. ALONG WITH AMF PANEL(PRICE INCLUSIVE OF GST)
Rates quoted by Contractor for each item should be inclusive of GST
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.23 MB
Tendernotice_2.pdf
PDF • 3.33 MB
Tendernotice_3.pdf
PDF • 8.13 MB
Tendernotice_4.pdf
PDF • 7.53 MB
ZuarinagarArchitecturalDrawing.pdf
Additional Documents • 8.12 MB
BOQ_587899.xls
BOQ • 0.42 MB
ZuarinagarMPCSBidDocument.pdf
Tender Documents • 3.32 MB
ZuarinagarStructuralDrawing.pdf
Additional Documents • 7.52 MB
Download all tender documents and submit your bid