REPAIR, MAINTENANCE AND PERIODICALS OF BLDGS IN OFFICE AREA OF DAD AT NEW CANTT ALLAHABAD

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

S&F first or premium quality joint free non skid Ceramic tiles, coloured, superior/premium quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F first or premium quality glazed ceramic tiles, coloured First/superior quality 300x450 6 to 7mm thick (Digital tiles), set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-charge.

S&F first or premium quality glazed ceramic tiles, coloured First/superior quality 300x600 6 to 7mm thick, (Digital tiles) set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-charge.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like incl moulding the edges etc, and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F vitrified tiles, coloured, dark shade, superior quality double charge/GVT 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F first or premium quality vitrified tiles, coloured, dark shade, superior quality double charge/GVT 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as Dado/Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4complete all as specified and directed.

S&F first or premium quality vitrified tiles, coloured, dark shade, superior quality double charge/GVT 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F first or premium quality exterior finish designer pavement tiles, coloured, superior quality, 300x300x10mm thick as in floors/ pavement etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges complete.

M & L Prepainted galvalume aluminium zinc coating GI based corrugated colour steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

M & L Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm dia complete all as specified and directed.

Dismantling water tanks and removing to store exc 250 & n.exc 500 complete all as specified.

Dismantling water tanks and removing to store exc 500 & n.exc 1000 complete all as specified.

Dismantling water tanks and removing to store exc 1000 & n.exc 2000 complete all as specified.

S&F rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F rotational moulded,multilayer HDPE water storage tank of 2000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (minimum wt 210 gms) complete all as specified and directed.

S&F in repair PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 25mm bore pipe (minimum wt 455 gms) complete all as specified and directed.

S&F in repairs PVC tank cover/lid for 500/1000 ltr over head tank complete all as specified.

Repair of leakage of Small fittings galvanized iron medium grade such as socket, elbow, nipple, for 20mm bore pipe complete all as specified.

S&F in repair PVC low level syphonic action flushing cistern of 10 lit capacity including siphon, PVC float with ball valve, rubber cone and flush pipe,Brackets,450 long PVC connection pipe etc complete all as specified and directed( Make- Hindware Sleek/Commander Champion /Parryware slim line )

S&F in repair Grating doom 125mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified.

S&F in repair self closers bib taps 15mm bore, fancy type, cast copper alloy , chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make Prayag Cat No BSC-06 or equivalent make as approved by Engr-in-Charge.

Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed.

S&F 160mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed.

S&F PVC (SWR) bend with oval access door any radius suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F PVC (SWR) bend any radius suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F PVC (SWR) bend with oval access door any radius suitable for 160mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back type of size 550x400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repair vitreous china wash basin, white, oval shape of size 630x450 mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repair self closers pillar taps 15mm bore, fancy type, cast copper alloy , chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make Prayag Cat No BSC-02 or equivalent make as approved by Engr-in-Charge.

S&F in repair fancy type Chromium plated brass stop cock/ angle valve for 15mm bore pipe, fixed in repairs complete all as specified and directed.

S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repairs plastic seat cover white of pattern W.C including fixing divice and Chromium plated nuts, complete all as specified and directed. Make Cera/Hindware

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, aluminium frame, concrete or brick surrounds, glazed with puty or fixed with beads complete.

S&F in repair figured glass 4mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and directed.

S&F in repair single piece WC with PP soft close seat cover, Hinges, fixing Accessories, Accessories set and cistern fittings , size 360x640x680 mm white,S trap/P trap 220mm, etc. complete including making good to floor complete all as specified and directed.

S & F in repair vitreous China urinals Half stall type, white with grating and unions for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as specified

M&L for 80mm thick M-40 grade factory made vibratory compected cement concrete rubber moulded, coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.

S&F in repairs Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair 25mm dia Aluminium powder coated , fancy type drapery rod including polished wooden brackets and knob all as specified and directed.

S&F in repair toilet paper holder of complete all as specified and as directed.

S&F in repairs suitable for 15mm dia health faucet abs body with 08 mm dia, 01 mtr long flexible tube & wall hook complete all as specified and directed.

S&F in repairs soap dish dish(oval) type of milld steel Chromium plated including Chromium plated brass screws and wooden/plastic cleats , complete all as specified and as directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

M&L for sunken floor water proofing treatment complete all as as under :- (a) Scrapping the surface with wire brush,brooming,removing dust and cleaning with water,and allow to dry. (b) Applying with bitumen primer confirming to IS 3384- 1986 @ 0.50 Kg per Sqm. (c) Applying a tack coat of hot bitumen 85/25 conforming to IS-702-1998 @ 1.2 Kg per Sqm for water proofing membrane (d) Applying of min 3mm thick APP based Polymeric water proofing membrane wt not less than 3.0Kg per Sqm over entire area with overlapping and sealed all as specified and directed (e) Again applying hot bitumen 85/25 conforming to IS-702-1998 @ 1.2 Kg per Sqm over water proofing membrane (f) Binding with dry coarse sand @ 0.75 Kg/Sqm dusted over bitumen.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

S&F 4mm thick E-boards tiles (Make: Everest) false ceiling with powder coated GI snap grid frame work (Make: Armstrong/metacil or equivalent as approved) complete all as specified and directed including all necessary drilling, cutting, making good and necessary arrangement to fix electrical items as under:- (a) 25x25x1.5mm thick GI angle powder coated plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work, reinforced with GI wire mesh including sunk or raised moulding, POP cornics including two coat of oil bound distemper over a coat of primer after surface preparation all as specified and directed by the Engineer-in-charge.

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles etc. complete all as specified and directed.

M&L for old size brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water including removing of debries out side of MOD land complete all as specified and directed.

M&L rendering 15 mm thick in cm 1:4 fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.

M&L rendering 15 mm thick in cm 1:6 on on other than fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surface of ceiling and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper over one coat of cement primer on newly plastered surface of wall and cornices including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

Taking down shutters of any description n.exc. 1.0 sqm each leaf complete all as specified and directed.

Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

Refixing shutters in the same opening of any description n exc. 1.0 sqm each leaf including easing and adjusting including refixing the builders hardware complete all as specified and directed.

Refixing shutters in the same opening of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf including easing and adjusting including refixing the builders hardware complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F factory made single extruded WPC (wood polymer composite) solid door/Window/Ceosetory windows & other frames/ chowkhat of sizes 65x100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood power/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS crews having minimun frame density if 750 kg/cun, screw withdrawal strength of 2200N (Face & 1100 N/mm2 , moudules of elasticity 900 N/MM2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/mosture proof and fire retardant and fixed ub position with MS hold fast/lugs/SS dash fasteners of required dia and lenght complete as per direction of Engineer-in-Charge. ( M.S hold/fast/lugs or SS) dash fasteners shall be paid for separately. Note:- For WPC soild door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F flush shutters 35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

Taking down aluminium chowkhats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed.

Taking down aluminium chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

S&F of 35 mm thick second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all specified and as directed.

S&F Second class hardwood glazed and skeleton window shutter 35mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etc complete stiles &rails as specified in SSR Part I, Section 8, clause 8:20(b) .complete all as specified and directed.

S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 75mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F 100mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F 200mm long aluminum anodized barrel tower bolt of extruded section, fixed with stainless steel screws complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section, fixed with stainless steel screws complete all as specified and directed.

S&F in repair 150mm long aluminum anodized barrel tower bolt of extruded section, fixed with stainless steel screws complete all as specified and directed.

S&F in repair 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repair 125mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with stainless steel screws complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed

M & L for Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified & directed.

S&F for Rolled mild steel hollow sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, posts etc fixed with angle cleats or other connecting plates complete all as specified.

M&L mild steel framed work such as grills, grates etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, framed and hung as gates including pintle hinges, stops, hand made sliding bolts etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-1 (using 20mm graded stone aggregate ) as in bed blocks for holfasts etc complete all as specified and directed.

S&F mild steel work such as hold fasts, bands straps , wind tie and similar small articles, drilling hole including nuts & bolts conforming to Fe-295 Gde E-165 complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at the length n exe 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed .

M&L for preparation of new or previously untreated surfaces of steel or Iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red Oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L applying two coat of Dr Fixit sure ceal damproof chemical on plaster/unplastered surfaces complete all as specified by the manufacture . Make- pedilite and equivalent of johnson.

S & F Solid PVC moulded door frame of size 50mm x 95 mm made out of 5 mm thick single side prelam PVC sheet rreinforced with MS tube complete all as specified and directed.

S & F factory made Solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2, raised panel design with 2 mm thick moulded Prelam on front face and 2 mm thick prelam PVC sheet on back side completed all aspecifed and directed.

S&F in repair PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, complete all as specified.

S&F in repair Brass Mortice Lock, 4-6 Lever fixed to Aluminum doors complete all as specified and directed Make Godrej/Link

S&F in repairs aluminium (Die cast) body Door closer hydraulically regulated,designation No. 2,universal type, suitable for door shutters of 701to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified.

Supply only 32/40mm bore PTMT waste pipe of best quality,600mm long for wash basin and sink etc complete all as specified and directed.

S&F in repair wall mixer with provn for overhead shower with 115mm long bend pipe on upper side, connecting leg & wall flanges, quarter turn, brass chromium plated, fancy type with all accessories and fixed complete all as specified and directed.

S&F in repair central hole basin mixer without popup waste system with 450mm long braided hoses, quarter turn, brass chromium plated, fancy type with all accessories and fixed complete all as specified and directed.

S&F in repair two way angle valve with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S&F in repair Brass Chromium plated shower rose 100 mm dia with 190mm long arm, swivel joints, complete all as specified and directed.

S & F in repair brass CP bottle trap and making it fully leak proof by providing ‘M’ seal on joints complete.

M&L for cutting chases in brick work, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing or concealed conduit wiring, etc., and making good, (cutting not exc 10cm girth) complete all as specified and directed

M&L for Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof padding, in leveling course, benching, mud stops etc, complete all as specified and directed

M&L for 4.80mm thick tinted sheet glass,and glazing with EPDM rubber beads fixed to Aluminium doors/windows in square, area exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.

S&F in repair continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.

M&L for preparing plastered or unplastered old decorated surfaces of wall including cornices etc by brooming down or steel wire brushing ,scrapping down smoke shoot, moulds, mos and efflorescent salts and trading oil and greasy spots,removal of vegetation and applying one coat of white wash on wall surfaces complete all as specified and directed.

M&L for preparing plastered or unplastered old decorated surfaces of wall including cornices etc by brooming down or steel wire brushing ,scrapping down smoke shoot, moulds, mos and efflorescent salts and trading oil and greasy spots,removal of vegetation and applying Two coats of white wash on wall surfaces complete all as specified and directed.

M&L for preparing plastered or unplastered old decorated surfaces of Ceiling including cornices etc by brooming down or steel wire brushing ,scrapping down smoke shoot, moulds, mos and efflorescent salts and trading oil and greasy spots,removal of vegetation and applying one coat of white wash on Ceiling surfaces complete all as specified and directed.

M&L for preparing old decorated surfaces of wall including cornices etc by washing rubbing down and stopping of distempered surfaces and applying one coat of Water thinable oil emulsion distemper white or tinted of approved shade complete all as specified and directed.

M&L for preparing old decorated surfaces of wall including cornices etc by washing rubbing down and stopping of distempered surfaces and applying Two coats of oil emulsion distemper white or tinted of approved shade complete all as specified and directed.

M&L for preparing old painted surfaces of wood or wood base materials of any description not otherwise described, surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing old surfaces of wood or wood base materials and applying one or more coats complete all as specified and directed.

M&L for preparing old painted surfaces of steel of any description not otherwise described, surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old decorated surfaces of wall including cornices etc by washing rubbing down and stopping of distempered surfaces and applying one coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed.

M&L for complete removal of existing treatment from old decorated surfaces of wall including cornices etc by washing rubbing down and stopping of previously painted surfaces including making good minor surface imperfections such as holes, dents cracks etc and applying Two coats of Cement Base Paint white or tinted of approved shade complete all as specified and directed.

M&L for complete removing existing wall finishes any type by vigorously wire brushing brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc and applying wall care putty 1 to 2mm thick and making surface absolutely smooth applying two coats of anti fungal exterior emulsion paint (Apex/Weather coat/Weather shield) white or tinted as approved complete all as specified and directed.

M&L for complete removing existing wall finishes any type by vigorously wire brushing brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc and applying wall care putty 1 to 2mm thick and making surface absolutely smooth applying two coats of plastic emulsion paint white or tinted as approved complete all as specified and directed.

M&L for oblitering of old writting letters or figures (block,Roman,Italic or Indian) n.exc 30 cm height for writting Bldg Nos,Block Nos and Quarter Nos etc. and rewritting with synthetic enamel paint to match with existing letters and rewriting the letters upto four story complete all as specified and as directed.

S & F decorative type veneer blinds complete all as specified by Engineer-in-charge.

Taking down plaster from edges of RCC chajja or corners of coloumns where steel reinforcement coming outs and filling with 15mm thick rendering in CM (1:3 ) after applying Two coats of cement base paint over a coat of primer to match with the existing shade/colour of buildings complete all as specified and as directed. Note :- Necessary scafolding upto four story will be provided by contractor and unit rate will be deemed including this aspect.

M&L for cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 n.exc 500 ltrs and from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position, complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc from water tanks of capacity 1000 ltrs and from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position, complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc from water tanks of capacity 2000 ltrs and above from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position, complete all as specified and directed.

M & L for removing roots of plants completely from wall, digging out roots, filling holes, making good disturbed surfaces including making all necessary arrangements of scaffolding upto 4 story etc as required at site complete all as specified and directed.

S&F 12mm thick frosted toughned glass pan joint togather for making partitions, walls/door etc, fixed with jointing material and seal with transparant selicon and rubber/PVC flap , including 6 Nos of Brass CP 450mm long handles, suitable magnet and 9 Nos suitable hinges etc.

Crown Engineering Corporation

HARSH ASSOCIETES

SWETA ENTERPRISES

K L KALSI

M/S CHANDRIKA PRASAD AND SONS

oasis contractor builder and supplier

M/s Vaishnavi Constructions

Abhinav Builders

Channa Brothers and Co.