SPECIAL REPAIR TO WASHROOM AT CERTAIN PLACES AT BLDG NO 234 AT VSN NAGPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including floor finishes work and disposal of debris complete all as specified and as directed.

Demolition of Brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars, etc,complete all as specified and directed.

Taking down cement plaster on brick or stone walls, concrete etc, including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Taking down chowkats with shutters (without taking off shutter from the frame ) area not exceeding 1.5 sqm all as specified and directed.

Taking down chowkats with shutters (without taking off shutter from the frame ) area exceeding 1.5 sqm but not exceeding 4.0 sqm all as specified and directed.

Taking up or down steel tubing of 15mm bore and connections, including cleaning for refixing all as specified and as directed.

Taking up or down steel tubing of 20 mm bore and connections, including cleaning for refixing all as specified and as directed.

Material & labour for brickwork with fly ash bricks, straight or curved in plan exc 6m mean radius built in CM 1:6 all as specified and directed.

Material & labour for brickwork with fly ash bricks, straight or curved in plan to any radius in half thick brick wall built in CM 1:4 all as specified and directed.

Material and labour for rendering 15 mm thick on other than fair finish of brick / concrete / stone surface of wall in cement mortar 1:4 using water proofing compound and finished the surface even and smooth without using extra cement complete all as specified and as directed. (Water proofing compound to be measured and paid seperately)

Material and labour for rendering 5 mm thick on ceiling surface in cement mortar 1:3 finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 10 mm thick on fair faces of brickwork / concrete surface in cement mortar 1:4 complete all as specified and directed.

Supply only approved integral water proofing compound.

Material & labour for providing 75 mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregates as plinth protection / path finished the surface even and smooth without using extra cement, including forms, moulds, mitred/ stopped ends all as specified and directed.

Material and labour for forming construction joint 30 mm deep x 10 mm wide filled with sealing compound Grade B complete all as specified and directed.

Material and labour for water proofing treatment of sunken portion of toilet, cement mix with mastercrete-M-81 of CHOKSEY CHEMICALS (or equivalent product of other company) in the ratio of 2:1, two part of cement and one part of mastercrete-M-81 and applied in two coats @ 0.75 kg /sqm per coat all as per manufacturer instruction and directed by Engr-in Charge

Material and labour for 50 mm thick plain Cement concrete 1:2:4 type B-1 using 20 mm graded aggregate, as in sunken floor, fair finish with using extra cement complete all as specified and directed.

Material and labour for coloured joint free non skid ceramic tiles 7-8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with tiles all as specified and directed.

All as per item no 19 here in before above but as in skirting on vertical surfaces of wall laid over 10 mm thick backing coat in CM 1:4 including rubbing and polishing complete.

Material and labour for glazed coloured ceramic tiles in vertical surface 350 x 250 x 7 to 8 mm / 450 x 350 x 7 to 8 mm thick over and including 10 mm thick in cement mortar 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile complete all as specified and directed.

Material & labour for granite (of any type and any colour) work (table rubbed and polished) of 20 mm thick in steps, jambs, pillars, window-cill cooking platforms over screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing complete all as specified and as directed.

Supply and fix GI Tubes, ‘medium grade’, galvanised, including cutting chases for concealed with all fitting 15mm dia including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed

Supply and fix GI Tubes, ‘medium grade’, galvanised, concealed with all fitting 20 mm dia including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed

Supply and fix solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube & fixing in opening including hold fast complete all as specified and as directed. Note : Butt hinges shall be paid separetaly.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame as required at site complete and as directed of approved make.

Supply and fix for aluminium doors framed with shutters glazed with 5mm thick tinted glass / prelaminated particle board, section of frame 63 X 37 mm, consisting of bottom and top rails of shutters is 110 mm X 45mm lock rail of shutter is 80 X 45 mm, style of door shutter is 80 X 45mm, including 02 x aluminium door handles locking arrangement with one pair key, confirming to IS complete all as directed by Engr-in-Charge.(Note : Glazing and prelaminated particle board shall be measured and paid seperately)

Supply and fix for aluminium louvers type ventilator weighing 0.55 kg/meter with 4 mm thick frosted glass with all fittings closing and opening type aluminium sections of approved make confirming to IS.(Glazing shall be measured and paid seperately) complete all as specified and directed

Supply & fix for door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed

Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty including taking down old one all as specified and directed.

Supply & fix 2 lever brass mortice lock of size 100 mm for aluminium door complete all as specified and as directed

Supply & fix 2 lever brass mortice lock of size 75 mm for aluminium door complete all as specified and as directed

Supply and fix for door stopper of aluminium alloy body with rubber shoes overall length 150 mm all as specified and as directed.

Supply and fix for butt hinge, medium weight, cold rolled mild steel 100 mm long with necessary bolts all as specified and as directed.

Supply and fix butt hinge, medium weight, cold rolled mild steel 75 mm long with necessary bolts all as specified and as directed.

Supply and fix extruded aluminium bow handles of size 150 mm complete all as specified and as directed

Supply and fix extruded aluminium bow handles of size 100 mm complete all as specified and as directed

Supply and fix aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm long all as specified and as directed.

Supply and fix aluminium, anodised, barrel tower bolt of extruded section and fixed, 100 mm long all as specified and as directed.

Supply and fix aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm long all as specified and as directed.

Supply and fix mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 150 mm complete and all as specified and as directed

Material and Labour for preparation of old plastered ceiling surfaces with complete removal of existing treatment and applying two coats of white wash complete all as specified and as directed.

Material and Labour for preparation of old plastered wall surfaces with complete removal of existing treatment and applying two coats of white wash complete all as specified and as directed.

Material and Labour for preparation of old plastered wall surfaces with complete removal of existing treatment and applying two coats of distemper oil emulsion over 2 mm thick wall care putty complete all as specified and as directed.

Material and Labour for preparation of old plastered external wall surfaces with complete removal of existing treatment and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and Labour for preparation of newly plastered wall surfaces by applying two coats of distemper oil emulsion over 2 mm thick wall care putty complete all as specified and as directed.

Material and Labour for preparation of newly plastered external wall surfaces by applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and Labour for preparation of newly plastered ceiling surfaces by applying two coats of white wash complete all as specified and as directed.

Material and labour for preperation of old painted surfaces and applying one coat of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surfaces over 10cm girth including preparation of surfaces complete all as specified and as directed.

Dismantling of water tank of capacity 500 litres to 1000 litres complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part-I and as directed.

Supply and fix rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part-I and as directed.

Supply and fix stop valves of size 15 mm bore dia of PTMT any colour high pressure, screwed for iron pipe and fixed (minimum weight 15mm -90 grams / 20 mm -92 grams) complete all as specified and directed.

Supply and fix float valves of size 20 mm bore dia high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Excavating in trenches, in any type of soil not exceeding1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, well, cesspits, manholes, pier holes etc, not exceeding 10 sqm on plan and not exceeding 1.50 mtr minimum depth and getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed.

Material and Labour for removing excavated soils exceeding 1.5 kilometer but not exceeding 5.0 kilometer and depositing where directed complete all as specified and directed.

Demolition and breaking up drain pipes, 150 mm dia (salt glazed stone ware, spun pipes, cast iron, PVC or reinforced concrete drain pipes, AC pipe set in cement mortar and removing from site of work to a distance not exceeding 50 meter all as specified and as directed.

Material & labour for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) for 150 mm bore pipe complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for as in manhole cover slab complete all as directed.

Material & labour for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone agg)as in manhole covers set in cement motar 1:6 all as specified and directed including necessary formwork and moulds all as specified.

Supply and fix mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending and binding with mild steel annealed wire not less than 0.9 mm dia or securing clips, complete all as directed.

All as per item No. 63 here-in-before but 8 mm dia bar

Supply and fix for spun pipes soil / CI pipes waste and vent pipes 100 mm dia of any length with or without ears, with cement joints, laid in trenches or in floors all as specified and directed.

Supply and fix for spun pipes soil / CI pipes waste and vent pipes 100 mm dia of any length with or without ears, with cement joints, fixed to wall all as specified and directed.

Supply and fix in repairs spun pipes soil / CI branch piece single (equal or unequal) spigot and socket with oval access doors suitable for 100 mm dia of pipe complete all as directed.

All as per item No- 67 here-in-before but 75 mm bore complete all as specified and directed

Supply and Fix in repairs spun pipe/cast iron, bends (any radius) diminishing and tapers with oval access door fitted to 100 mm bore pipes complete all as specified and as directed.

Supply and Fix in repairs spun pipe/cast iron, bends (any radius) diminishing pieces and tapers with oval access door fitted to 75 mm bore pipes, complete all as specified and as directed.

Supply and Fix for 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including dismantling old unserviceable pipe complete all as directed.

All as per item No 71 here-in-before but 75 mm bore complete all as specified and directed

Supply and Fix for 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls as in soil / waste pipe including dismantling old unserviceable pipe complete all as directed.

Supply and Fix for PVC (SWR) pipe, 75 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fix in repair 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction, single (single T) equal or unequal complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

Supply and fix PVC (SWR) bends, 75 mm bore complete all as specified and as directed.

Demolition of plain cement concrete of any descreption and in any position not otherwise specifically provided for complete all as directed.

Material & labour for Plain cement concere 1:3:6, type C2 (using 40 mm graded stone aggregate) as in surface channel and drain complete all as specified and as directed.

Material & labour for fair finish to surface drain with using extra cement complete all as specified and directed

Supply and fix in repairs CP bottle trap, 32 mm dia fancy type as approved by engr-in-charge, Complete of Make - Jaguar or equivalent in M/s Parry ware/M/s Johnson including taking down the unserviceable one all as specified and directed.

Supply and fix in repairs stainless steel grating,150 mm dia, with waste hole, of PTMT (minimum weight 40 gms), fixed in repairs, all as specified and directed.

Supply and fix for PVC (SWR) floor trap with grating, 75mm bore including jointing to waste pipe with solvent cement including taking down of existing old trap complete all as specified and as directed.

Supply and fix for PVC (SWR) multy floor trap with grating, 75mm bore including jointing to waste pipe with solvent cement including taking down of existing old trap complete all as specified and as directed.

Supply and fix for PVC (SWR) gully trap with grating, 125/110 mm bore plain including jointing to waste pipe with solvent cement including taking down of existing old trap complete all as specified and as directed.

Supply and fix for Wash hand Basins, white, Under counter basin round, Dia 455 mm, complete all as specified and directed. Make - Somany Cat No-110302 or equivalent in CERA or Jaguar.

Supply and Fix for 'FABIA' (Senser Urinal) white, of size 485mm x 305 mm x 735 mm, complete all as specified and directed. Make - Somany Cat No-130212 or equivalent in CERA or Jaguar.

Supply and Fix for 'KAMP' Ext wall hung Toilet, of size 375 mm x 660 mm x 770 mm, P-Trap, 170 mm with ezee close seat cover complete all as specified and directed. Make-Somani Cat No-120302 or equivalent in CERA or Jaguar.

Supply and Fix for 'PACE', one piece Toilet, of size 350 mm x 695 mm x 705 mm, P-Trap,180 mm complete all as specified and directed. Make-Somani Cat No-120107 or equivalent in CERA or Jaguar.

Supply and Fix for Health Faucet with hook and 1.5 meter tube full brass of 15 mm dia. complete all as specified and directed. Make -JAINKO. Cat. No-HFJ-2 or equivalent in Jaguar or CERA

Supply and Fix for Pillar cock Chromium plated, 15mm dia, complete all as specified and directed. Make-Jainko, Cat No-PCJ-6 or equivalent in Jaguar or CERA.

Supply and Fix for two in One Bib Cock, Chromium plated, 15 mm dia, complete all as specified and directed. Make-Jainko,Cat No-BCJ-2 or equivalent in Jaguar or CERA.

Supply and Fix for Bib Cock, Chromium plated, 15 mm dia, complete all as specified and directed. Make-Jainko,Cat No-BTJ-3 or equivalent in Jaguar or CERA.

Supply and Fix for two in One angle Valve, Chromium plated, 15mm dia, complete all as specified and directed. Make-Jainko, Cat No-ACJ-2 or equivalent in Jaguar or CERA.

Supply and Fix for Angle Valve, Chromium plated, 15mm dia, complete all as specified and directed. Make-Jainko, Cat No-AVJ-3 or equivalent in Jaguar or CERA.

Supply and Fix for Soap dish holder (CP Brass) complete all as specified and directed. MAKE-Jaguar Cat No.-ACN-1131N or equivalent in Prayag or CERA.

Supply and Fix for Towel Rod 600mm Long, Stainless Steel complete all as specified and directed. Make-Jaguar Cat No. ACN-1111NM or equivalent inPrayag or CERA.

Supply and Fix for Toilet Roll Holder with Flap. complete all as specified and directed. Make-Jaguar Cat No. ACN-1153N or equivalent in specified makes.

Supply and Fix for SDG frameless looking mirror for bathrooms, silver colour, size 18 x 36 inch, 5 mm thickness, bevelled edge at 0.75 inch, complete all as specified and directed. Make:Saint Gobain/Modi Guard ultra Mirror.

Supply and Fix for polo sensor faucet fo wash hand basin complete all as specified and directed. Make - Somany Cat No-210801 or equivalent in CERA or Jaguar.

Supply and Fix for 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed

Supply and Fix for vitreous chain squatting pan, 'Orrissa pattern" size 630 mm x 450 mm, white with integral foot rests, including PVC ' P' or 'S' trap (excluding flushing cistern and flush pipe) complete bedding all as specified and directed.

Supply and Fix for vitreous china wash down water closet pan (Pedestal pattern), white, including fixing of flush pipe, nut bolts, brackets etc complete all as specified and as directed.

Supply and Fix for Plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices complete all as specified and as directed.

Supply and Fix in repair 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Hacking out old broken glass (any thikness, size, quality or description) from metal frame including punching or drilling out old glazing pins / springs clips and providing and fixing new ones complete all as specified and directed

Supply and Fix for figured glass, pin head type and 3.0 mm thick glazing with oil putty in squares not exceeding 0.5 sqm in each pane all as specified and directed

Supply and Fix for sheet glass 3.0 mm thick, ordinary quality, in squares not exceeding 0.5 sqm in each pane all as specified and directed

Supply and Fix for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

Material and labour for prelaminated particle board 12 mm thick, exterior grade, prelaminated both sides with decorative choice laminations as per site requirement fixed with aluminium frame work as in door / fixed frame work complete all as specified and directed

Material and labour for 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination for cupboard door, side / middle / top / bottom / shelf of cupboard complete all as specified and directed. Make :- Novapan/Green Ply/Century Plywood.

Supply and Fix for second class hard wood plain fillets of sectional area exceeding 13 sqcm and not exceeding 25 sqcm, square, rectangular or triangular in section, clean sawn, secured in brick wall / RCC with sutaible nails / screws / nuts and bolts complete all as specified and directed

Material and labour for teak wood beading 18 to 20 mm wide and 4 mm thick including polishing for beading of prelaminated particle board complete all as specified and directed

Supply and fix 75 mm size stainless steel butt hinges, medium weight, fixed complete all as specified and directed.

Supply and fix continuous (piano) hinges, aluminium, bright finish or electrogalvanised, width of flap 30 mm when open complete all as specified and directed.

Supply and fix for 125 mm size brass handles, cast type, polished bright complete all as specified and directed.

Supply and fix for catch spring magnet type for cup board complete all as specified and directed.

Supply and fix for aluminium knobs 35 to 40 mm dia complete all as specified and directed.

Supply and fix in repair 110mm PVC (SWR) vent cowl of any radius all as specified and as directed.

Supply and fix in repair 75 mm bore PVC (SWR) junction, single (single T) equal or unequal complete all as specified and as directed.

Supply and fix for stainless steel grating 100 mm dia with waste hole good quality, fixed in repair complete all as specified and as directed.

INTERNAL ELECTRIFICATION

Taking down main switch, DB etc of any size and making good disturbed surface of wall /floor complete all as directed.

Taking down carefully sub main wiring of any type and size including all accessories without disturbing existing wiring fittings, fixture and making good the disturbed surfaces all as directed.

Material and labour for sub main wiring (concealed) complete with four single core 4 sq mm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit and fittings including two single core 4 sq mm FR PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting, chasing by using machine and making good the disturbed surface complete all as specified and directed. Make of cable : Polycab, Finolex, Havells Note: 3 runs of 4 Sqmm cable and 1 run of PVC conduit all together shall be measured as one unit.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed

Material and labour for point wiring (concealed on wall and suface on ceiling) complete with FR PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non-metallic heavy grade, rigid PVC conduit , ISI marked, 19/20 mm dia including all necessary accessories and making good the disturbed surface with and including suitable modular boxes with cover plates as required of approved make and 1.5 sq mm copper earth continuity copper conductor connected to earth dolly complete for follwing all as specified and as directed :- Note :- The rate for point wiring shall be deemed to include the cost for make good for disturbed surfaces of wall for concealing box /wiring by applying cement plaster, putty and colour wash etc matching with the existing surfaces

(a) one ligh point controlled by one switch.

(b) one exhuast fan point controlled by one switch.

(c) one switch socket outlet modular type 3 pin 6 amp on same board.

All as per item No. 126 above herein before but for 1.5 Sq.mm cable size and 1.5 Sq.mm earth continuity wire for one 3 pin socket outlet, 6 amps on independent board.

All as per item No. 126 above herein before but for 2.5 Sq.mm cable size and 2.5 Sq.mm earth continuity wire for one 3 pin socket outlet, 16 amps on independent board.

Supply and fix master led tube 4ft 20W LED tube polycarbonate type, nominal system lumen output of 2100 lumens and a minimun system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hourse at L70. The luminaire should have a colour tempertaure of 6500K and CRI>83. The luminaire shall meet IP-20 rating with THD<10% and PF >0.95. The total power consumption should not exceed 18W (Including driver ) all as directed. Make : Philips or equivalent in CG/ Wipro

Supply and fix decorative box type fitting with blue coloured end caps pre wired for LED tube energy of 20 Watt. Make : Phillips / WIPRO/ CG

Supply and fix surface mounting LED Luminaries and 1 x 9 Watt LED fiitting including two Nos PVC block of suitable size and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed Make: Phillips/ WIPRO/ CG

Supply & fix modular switch 6 single pole and way 6 amps, 250 volts, AC without indicator all as specified and as directed Make : Legrand cat No.675501 or equivalent in specified makes.

Supply & fix modular sockets single pole one way 6/10/13 amps multistandard 250 volts all as specified and as directed by EIC. Make : Legrand Cat No. 675554

Supply and fix Ceiling rose of 3 phase/PVC/ polycarbonate, isolated body 65 x 50mm two or three terminals all as directed. Make : Leader, Anchor

Supply & fix modular sockets 16A - 3 pin combined, 2 module, 240 volts all as specified and as directed by EIC. Make : Legrand cat No. 675555 or equivalent in approved makes.

Supply and fixing modular switch one way 16 Amp with indicator, 1 Module, 240 Volts all as specified and as directed by EIC. . Make : Legrand cat No. 675513 or equivalent in approved makes.

Supply & fix sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed. Make: Legrand, cat No 507611 or equivalent in Hanger/ Siemens.

Supply & fix MCB SPN 32Amps, breaking capacity 10 KA 'C' curve conforming to IS, 240 volts, 50 HZ including making necessary electrical connection all as directed Make: Legrand Cat No. 408617 or equivalent in Hager/Siemens.

Supply & fix MCB single pole 10 to 32Amps, breaking capacity 10 KA 'C' curve conforming to IS, 240 volts, 50 HZ including making necessary electrical connection all as directed Make: Legrand or equivalent in Hager/Siemens.

Material and labour for MCB blanking plate all as specified and directed.

Taking down old exhaust fan and depositing to E/M store and Supply and fix new exhaust fan heavy duty metal body 300mm sweep with louvers, operated on 230/240V AC single phase electric supply 1350 RPM complete duly grouted in the existing position where directed fixed with nuts, bolts and washers including connecting with 3 core stranded copper conductor cable code of size 0.5 sqmm from ceiling rose to fan connector complete all as specified and directed. Make:- Usha, Bajaj, CG

Taking down old exhaust fan and depositing to E/M store and Supply and fix new exhaust fan PVC body 300mm sweep with louvers, operated on 230/240V AC single phase electric supply 1350 RPM complete duly grouted in the existing position where directed fixed with nuts, bolts and washers including connecting with 3 core stranded copper conductor cable code of size 0.5 sqmm from ceiling rose to fan connector complete all as specified and directed. Make:- Usha, Bajaj, CG

Note : The amount against Schedule of Credit on Page No. 38 (R) shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

M/s Prakash R. Verma

Meet Road Lines