Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹1.4 L+₹12,890 (10.0%)Admitted-Finance C 5 156 YAMUNA VIHAR EAST DELHI DELHI 110053 | NORTH EAST DELHI | DELHI | 110053 | L2 | Admitted-Finance | |
| 3 | Rejected-Technical | - | Rejected-Technical Technically Not Qualified |
| Sl No | Description | Qty | Unit | ARCHY SERVICES PRIVATE LIMITED L2 | KALAKAJI REFRIGERATION AIRCONDITIONING & ELECTRICALS L1 |
|---|---|---|---|---|---|
| 1.00 | Replacement of existing damaged evaporator coil by Fabricating, Supplying, Installation, Testing and Commissioning of aluminium finned seamless solid drawn copper tubes (tube thickness not less than 0.5 mm) evaporator cooling coil (as good as replica of the old one) of required row deep, filter section with metal viscous / washable synthetic type air pre-filters to be designed and fabricated exactly same as the existing coil in the 16.5 TR Packaged AC unit, copper header, supporting frame made of 18 swg SS304 steel or aluminium, U-bends made of copper jointed to the tubes by brazing after removing the existing evaporator assembly from the AHU etc. as per following additional specifications:
Coil shall be fitted with equalizing copper distributor as it is for double compressor circuits (this should a complete replica of the original)
Cooling coil shall be 3 or 4 rows deep, as per manufacturer's standards, made of copper tubes of minimum 0.5 mm thickness and aluminium fins of minimum 0.15 mm thickness, mechanically bonded to the coils.
Number of fins per cm of tube shall be 4 to 5
The coil shall be designed for a face velocity of not more than 155 m/min. Coil shall be thoroughly evacuated, dried and pressure tested to 21 Kg /sq.cm (300 psi)
Cleanable aluminium wire mesh/ synthetic media type air filters, at least 25 mm thick, shall be provided, swung fit to prevent air by pass.
Face velocity across the filters shall not exceed 100 m/min.
The work shall include provision of suction line insulation as per manufacturer standards as required.
The work shall include supplying and charging of full quantity of refrigerant, leak testing, pressure testing with dry nitrogen gas, vaccumising as per standard practice, brazing, commissioning the unit for its satisfactory run etc. complete as required. | 1 | Job | 1,41,790 ₹1,41,790 | 1,28,900 ₹1,28,900 Lowest |
Tender Value
₹1.4 L
EMD Value
₹2,714
Closing Date
1 Aug 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
AEE In-Charge, AC Division, Works Department, AC Division, Engineers Complex, IIT Delhi, Hauz Khas, New Delhi - 110016
Replacement of Damaged Evaporator (DX) of 16.5 TR Packaged AC Unit and Allied Works, IIT Delhi
2025_IIT_869573_1
IITD/WORKS (SP- 5064)/2025
Open Tender
Miscellaneous Works
Works
25 days
Indian Institute of Technology Delhi Hauz Khas
As per tender documents
7 documents required · 7 mandatory
₹0
₹2,714
13 Aug 2025
18 Jul 2025
4 Aug 2025
18 Jul 2025
1 Aug 2025
18 Jul 2025
Amount
Replacement of existing damaged evaporator coil by Fabricating, Supplying, Installation, Testing and Commissioning of aluminium finned seamless solid drawn copper tubes (tube thickness not less than 0.5 mm) evaporator cooling coil (as good as replica of the old one) of required row deep, filter section with metal viscous / washable synthetic type air pre-filters to be designed and fabricated exactly same as the existing coil in the 16.5 TR Packaged AC unit, copper header, supporting frame made of 18 swg SS304 steel or aluminium, U-bends made of copper jointed to the tubes by brazing after removing the existing evaporator assembly from the AHU etc. as per following additional specifications: Coil shall be fitted with equalizing copper distributor as it is for double compressor circuits (this should a complete replica of the original) Cooling coil shall be 3 or 4 rows deep, as per manufacturer's standards, made of copper tubes of minimum 0.5 mm thickness and aluminium fins of minimum 0.15 mm thickness, mechanically bonded to the coils. Number of fins per cm of tube shall be 4 to 5 The coil shall be designed for a face velocity of not more than 155 m/min. Coil shall be thoroughly evacuated, dried and pressure tested to 21 Kg /sq.cm (300 psi) Cleanable aluminium wire mesh/ synthetic media type air filters, at least 25 mm thick, shall be provided, swung fit to prevent air by pass. Face velocity across the filters shall not exceed 100 m/min. The work shall include provision of suction line insulation as per manufacturer standards as required. The work shall include supplying and charging of full quantity of refrigerant, leak testing, pressure testing with dry nitrogen gas, vaccumising as per standard practice, brazing, commissioning the unit for its satisfactory run etc. complete as required.
ARCHY SERVICES PRIVATE LIMITED (BID ID -3255931)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .