BAINSARI SE BAHAWALPUR LINK ROAD

Construction of embankment with approved material obtained from borrow pits with all lifts upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1 and 300.2 with lead up to 1000m as per technical specification clause 301.5 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing, laying and spreading material on a prepared subgrade add cement@2% by weight to spread Material manually miixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base as per Technical Specification no 405 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing, laying and spreading material on a prepared sub base cement@4% by weight to the spread Material manually miixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base. as per Technical Specification no. 405 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing and applying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface treated with primer and cleaned with hydraulic broom as per Technical Specn. No. 503. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration or Emulsion grade bitumen to required line grade and level to serve as wearing coarse on a previously prepared base by manual means including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades to be followed by seal coat as per T.S.C. 508 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing and laying seal coat by manual means with 80/100 grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per TSC 510 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing and fixing of Hectometere stone as per IRC-8 including painting and letter writing etc as per direction of E/I. (Hecto mt. -stone), Providing and fixing of kilometere stone as per IRC-8 including painting and letter writing etc as per direction of E/I.(Km -stone) & Providing and erecting direction and place indentification retro-reflectroised sign as per IRC-67 made of high intensity grade sheeting vide clause 801.3 fixed over almuminium sheeting,2 mm thickwith area not exceeding 0.9 sqm.Supported on a mild steel single angle iron post 75 x75 x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm,below ground level as per approved drawing,Complete.(90x90 cm) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Construction of un-reinforced and construction joint only plain cement concrete pavement thicknesh as per drawing over a prepared sub base with 43 grade cement as per clause 1501.22 M-30 Grade coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixture of not less than 0.20cum capacity and aproctimat weight batcher using approved mis design laid in approved fixed etc form work (Steel, channel laying & fixing fo 125 micron thick polythin film wedge steel plates including leveling the form work as per drawing) speading the concrete with shovels, rakes, compacted, using niddle sceed and plate vibrators and finished in a continuous operation including provision of contraction, expansion, construction joints applying primers sealent and construction joint admixtures as approved curring of concrete slabe for 14 days curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Excavation for roadwork in soil with hydraulic excavator of 0.9cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location within a lifts up to 1.50m and lead upto 1000m. As per technical specification clause No. 302.3 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I. P.C.C grade M 10 (i) Nominal mix 1:3:6 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 II. Brick masonry in 1:4 cement mortar (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Supply Laying & Fixing,of 1200 mm dia NP-3 Class Hume pipe as per MORD Specification no. 1100 Sr no 9.7 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Supply Laying & Fixing,of 900 mm dia NP-3 Class Hume pipe (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Plastering with cement mortar (1:4), brickwork in substructure as per technical specification Clauses 613.4 & 1204 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing and laying pitching on slopes laid over prepared filter media as per drawing and Technical Specifications clouse 1302. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Maintenance of Bitumenious surface road and gravel or WBM road including filling pot holes and patch repair etc. restoration of rain cuts and dressing of side slop/berms, making up of berms/ shoulders maintenance of drain, maintenance of culvert maintenance of guard rails ans parapet maintenance of road signs speed breakers, standing tree at adjacent to road wherever required maintenance of Hectometer and kilometer stone cutting of branches of tree shrub and trimming of grass and weeds etc white washing of parapet including CD work, painting of guard stone, refixing of displaced guard stones as per performance Index anexure-1 mentioned in GO No. 55/2022/187/23-09-2022-02 Nabard /2021 Dt 28-04-2022 & Enc letter on 14 BDD-1(NH)/40MT-11/2024 dated 03-01-2024 Subjected to be Approved from Govt. Maintenance of 1st Year after completion of work Bitumenous work & CC Work @Zero% of total Work amount of item 1 to 18

Cost of Maintinece for 2nd Years for Bitumenious work @ 0.75% (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Cost of Maintinece for 3rd Years for Bitumenious work @ 1.50% (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) @ 1.50%

Cost of Maintinece for 4th Years for Bitumenious work @ 2.25% (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Cost of Maintinece for 5th Years for Bitumenious work @ 3.00% (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Cost of Maintinece for 2nd Years for CC work @ 0.25% (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Cost of Maintinece for 3rd Years for CC work @ 0.50% (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Cost of Maintinece for 4th Years for CC work @ 0.75% (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Cost of Maintinece for 5th Years for CC work @ 1.00% (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Please Enable Macros to View BoQ information