Providing Internal and External Electrification, AC arrangements with HEPA Filter and Lift arrangement to the Construction of New Building to Maternal Child Health Wing in Government Hospital at Thiruthuraipoondi in Tiruvarur District

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Supply and fixing of 4 Feet LED 20 W Fitting with LED 20 W tube (HigherEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube(HigherEnd) complete with conduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb Higher End

Supply and fixing of AC/DC 76mm buzzer / callbell suitable for 230volts 50c/ssinglephase AC supply on suitable TW board with push switch.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .

Supply and fixing of 3nos.6A two module 3 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug inflush with wall with earth connection (For AC Plug)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making goodof the concealed portion with suitable colour

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 2 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 2 nos 32 A TP MCB & 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one No 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one No 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in Each segment) and seperate provision for MCB / Isolators ( totally 18 Nos) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with Earth connection only.

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position

Supply and fixing of 4 Way VTPN MCCB distribution board with metal double door cover with IP 43 protection in sheet steel enclosure with 125A 4 pole MCCB as incoming and 3 Nos 100 A TP MCB [10KA] as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark

Supply and clamping of 31/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3 1/2 x 50 sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3 1/2 x 50 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Renewal by Supply, erection, testing and commissioning of 200 Amps Capacity dust and vermin proof floor mounting cubical panel board fabricated out of 16 SWG MS sheet for outer body, stiffness and doors and with supply and fixing of following interior switches with centre bus bar chamber and vertical no of switches one over the other on both sides of bus bar chamber with cable adapter chamber of the extreme end of both side with two coats of quality paint over one coat of zinc oxide primer superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2 nos metallic danger board affixed complete on base channel supports to satisfy the latest CEIG rules with the following switches confirming to IS specifications.Incoming: 1] 200A FPN Switch - 1 No Outgoing:2] 125A TPN switch disconnector fuse interior only with HRC fuses double break - 2Nos 3] 63A TPN switch disconnector fuse interior only with HRC fuses double break - 4 Nos The bus bar chamber should have 3 Nos of 32 x 6 mm tinned copper flat for 3 phases and 25 x 6 mm for neutral and 25 x 3 mm for body earth bus must be run all round the panel to provide earth connection to the cubicle switches cable glands etc., the bus bars should be supported on synthetic enamel compound at equal internal as per IS specification. The incoming switch should be connected with the main bus by 32 x 6 mm tinned copper flat and the outgoing switches with 25 x 6 mm tinned copper flat.The panel should have pilot lamp indicating arrangements and Multifunction meters with CT coil arrangments.

Supply and clamping of 31/2 x 150 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and laying of 31/2 x 150 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with brick sands and refilling the earth to make good

Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and clamping of 31/2 x 95sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and laying of 31/2 x 95 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with brick sands and refilling the earth to make good

Supply and fixing of brass cable gland for 3-1/2 x 95sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Earthing as per PWD standard with an earth electrode of 2 metre Class'B' GI pipe of dia not less than 32mm complete with necessary masonry work

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Design, Engineering, supply, fabrication, erection, testing, commissioning and handing over of 26 persons Bed-cum-Passenger gearless lift with machine room speed 1m /sec with stainless steel panels, disable friendly microprocessor based controlled vvvf drive, fire rated doors & ARD as per the following Technical specifications 1. Location :MCH building 2. No of Lift : 1 No 3. Type of lift : BED CUM PASSENGER LIFT 4. Capacity of lift : 26 persons BED cum passenger lift 5. Speed : 1.0 Metre / Sec 6. Type of Drive:microprocessor based controller, VVVF drive, Fire rated doors and ARD. 7. No. of Floors : ( G + 1 Floors) ( 2 stops ) 8. Total Travel: 4 metres Approx 9. Levelling Accuracy: High level accuracy with smooth and jerk free stopping. 10. Construction of Car: 18 SWG High quality stainless steel car and hand rail , PVC flooring, Perspex False ceiling Neat hair line finish and mirror finish in rear panel. 11. Position of machine: Directly above the lift well. ( Gearless) 12. No. of landing entrance: 2 Nos 13. No. of car entrance: one in front side only. 14. Car entrance door: Power operated V3F drive side opening sliding telescopic stainless steel scratch proof door with hair line finish. 15. Landing entrance door: Side opening stainless steel door with hair line finish with provision for emergency exit key opening at all landings.

34. Automatic Rescue device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories. 35. Provision of intercom with phone: To be provided by lift contractor with one handset in the lift car and another handset in the lift machine room. 36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 37. Floor position: Included with LED display and announciator with music 38. Special features: a. Infra-red door sensor with full height screen b. Stainless Steel signal fixtures. c. Vandal proof S.S. Button with S.S. cover d. SS door frames for landing doors. e. V3F door operator. f. Call Register signal g. Stainless steel facia plate for car operating panel and landing fixtures. h. On-Off switch for fan and light. i.Over load warning indicator with audio announcement 39. Other standard features: Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate

capacity electro magnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joint joist for mounting the machineries. 40. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period of not less than one year. 41.Site testing in accordance with IS 14665 should be carried out at the time of handing over. 42. Supply of operation and maintenance manual with necessary tools for operation. 43.Disabled friendly features as per Differently Abled act 44. 2 hours fire rated doors

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B' GI pipe of dia not less than 40mm with copper earthplate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and clamping of 31/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and fixing of 63A TPN MC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only

Laminar Flow

DX AIR COOLED CONDENSING UNITS:Design ,supply , installation, testing and commissioning of 5.5 TR Nominal capacity DX Air-cooled Condensing unit fixed with energy efficient R410A Refrigerant scroll compressor along with grooved copper tube/aluminium fins air cooled condensor coil with anticorrosion coatings,liquid ,accumulator, low noise alumimium propeller condenser fan with Fan motor etc all suitably assembled neatly in heavy duty GSS sheet metal cabinet and duly powdercoated as per specification .the unit to include built in safety controls like HP/LP switch power quality protector ,in built thermal / temperature protection .

Supply ,installation , testing and commissioning of 5.5 TR double skin Ceiling Suspended AHU with 2200 Cfm PUF Insulated detachable panels ,extruded thermal break aluminium profiles filled with PUF,panel external skin with 0.6 mm preplasticized sheet, panel internal skin with 0.6mm galvanized sheet, AMCA tested DIDW backward/forward curved centrifugal fan with EFF1 rating motor ,drive arrangement with taper lock pulleys for fan and motor, vibration isolators out of heavy duty rubberized mounts, prefilters with 3ply HDPE 50mm thick filters having an efficiency of 90% 10 mic, 6row /12FPI deep DX copper cooling coil with copper header and aluminium fins ,GI mist arrestor ,condensate coil trough with SS-304-20G insulated with 9mm closed cell elastomeric foam, guard for inspection door ,out let damper of aerofoil blades &PVC gears ,and flexible fire retardant canvass complete with galvanized hardware . each of the cooling coils will have independent distributers ,electronic expansion valve kit ,catch all drier, independent DX coil circuit to connectivity to each ODU circuit.

Supply and fixing of 8 ft x 6ft - Laminar Air flow Plenum made SS304 - 1.0 mm Thick casing, Mini Pleat Hepa Filters for 75mm Thick- Flange type, OT Pendant Light provision for 600X600, With SS304-1.2mm Thick perforated sheet. PLENUM SIZE: 1800L X 2400W X 350H. High Efficiency particulate Air (HEPA) filter specification: Filter Size : 8 feet x 6 feet x 1 feet Classification : H-13 Construction :Panel Type Efficiency :99.97% Optical efficiency at .3 micron Cleanliness level: Class 100 As per NABH Standard Spacers: Aluminium Initial pressure drop:25 mm W.C Final pressure drop : 75 mm W.C Duct holding capacity:4750gm/Sq.mtr Framing :Aluminium (Box type) Washable : No Test reports to be furnished from approved Government External Quality Assurance Lab/ Agency to meet the testing parameters after commissioning of the AC system with HEPA filter as per NABH standards.

Supply and filling of Non CFC R - 410A / R- 407C refrigerant gas.

Supply,fabrication and erection of fabricated ducting made up of aluminium sheets 20 gauge thickness

Supply,fabrication and erection of fabricated ducting made up of aluminium sheets 22 gauge thickness

Supply and fixing of extruded aluminium powder coated supply and return Air Grills / Diffussers with volume control damper.

Supply and fixing of water drain pipe .

Supply, fabrication and fixing of MS Channel for mounting the Airconditioning Indoor Unit

Supply, fabrication and fixing of MS Channel for mounting the Airconditioning Oudoor Unit

Supply and providing of pipeline nitrie rubber insulation for drain pipeline.

Supply and fixing of duct mouth Dampers.

Supply and providing Acoustic for initial portion of duction with 12mm thick fibre glass rigid board covered with tissue paper and aluminium perforated sheet.

Supply and providing Thermal insulation of 9mm thick vidoflex with aluminium foil.

Supply and providing 10 sq.mm. copper flexible signal cable.

Supply and installation of 28.6 mm Refrigerant Copper piping

Supply and installation of 15.9 mm Refrigerant Copper piping

Supply and fixing of Expansion Valve

Supply and fixing of flexible canvas connection

Sand cement plastering (1 :3) of 20mm thickness with chicken mesh for external exposed portion of duct

Supply ,fabrication and fixing of fresh air louver made of extruded aluminium with bird screen provided with intake louvers

Supply and fixing of 5 micron filter suitable for 5.5 Tr

Supply of extruded aluminium powder coated Gravity Louvers

Add GST

Chandrasekaran R (BID ID -1546143)

JAYARAJ (BID ID -1547097)