REPAIR MAINT OF SOLAR LIGHTS STREET LIGHTS GARDEN LIGHTS PTLS HIGH MAST LIGHTS DG SET ETC AT MIL STN SHAHJAHANPUR UNDER GE EAST BAREILLY

Amount

Taking down/repair of the defective security / street light fittings from wall / pole mounted of following type and refixing the same in its position after replacement of unserviceable spare parts such as choke, capacitor, igniter, holder, lamp connector etc :- (a) Old materials obtained under relevent items will be property of contractor as per sch of credit after regularisation of credit amount through the first payment. (b) Unit rate shall be deemed to be inclusive of provision of ladder arrangement in order to carryout the job at fittings on fixed position. (c) Supply only spares will be measured and paid for separately under relevent items.

Supply only Iginitor suitable for 70-400 w HPSV/MH Lamps all as specified.

Supply only Porcelain lamp holder for HPSV, HPMV 250 / 150 watt all as specified.

Supply only Porcelain lamp holder for HPSV/HPMV 125/80/70 watt all as specified.

Supply only Porcelain connector for HPSV/HPMV fitting of any type all as specified.

Supply only Chock for T-5, 2X24 Watt fitting all as specified.

Supply only Tube rod for T-5, 1X24 Watt fitting.

Supply only CFL 85 Watt retrofit all as specified.

Supply only CFL 65 Watt retrofit all as specified.

Supply only Copper Chock for HPSV/HPMV 250-400 W all as specified.

Supply only Copper Chock for HPSV/HPMV 150W all as specified.

Supply only Copper Chock for HPSV/HPMV 70Watts all as specified.

Supply only MH/SV Lamp Single Ended 250 Watts all as specified.

Supply only MH/SV Lamp Single Ended 150 Watts all as specified.

Supply only MH/SV Lamp Single/Double Ended 70 Watts all as specified.

Supply only MH Lamp Single/Double Ended 250 Watts all as specified.

Taking down old unsv street light fitting & Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complete including making connection complete all as specified and as directed by Engr-In-Charge.

Taking down old unsv street light fitting & Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistantcomplete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complete including making connection complete all as specified and as directed by Engr-In-Charge.

Taking down old unsv street light fitting & Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete including making connection complete all as specified and as directed by Engr-In-Charge.

Taking down old unsv Flood light fitting & Supply and fixing new LED Flood light fitting 100 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Engr-In-Charge.

Taking down old unsv garden light, fitting & Supply and fixing new Extruded aluminium decorative luminaire for LED (Retrofit). is an ideal solution for Garden/pathways light of housing material powder coated Zn plated ERW MS tubular section , coloure temp cool white 6500K LED 15 watt complete including making connection complete all as specified and directed by Engr-in-Charge.

Dismantling and taking down the existing old rusted and weak mounting brackets of any size & type complete all as specified and directed .

Supply and fixing mounting bracket made out of medium grade GI tubing suitable size bent to shape including 02 Nos MS clamps, Nut bolts, washers etc all as directed by Enginner-in-Charge.

S & F in replacement 15 W LED Street Light suitable for Solar Light complete all as specified and as directed by the Engineer-In-Charge.

Supply and fix street light LED driver luminar suitable for 30 watt to 100 watt complete all as specified and as directed.

S & F in repacement post top lantern type light fitting (RUBY (CLEAR) - IP65 ) New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source.including making connection complete all as specified and directed by Engr-in-Charge.

S & F Decorative gate light made up of high grade unbreakable ( Doom Only) polycarbonate material suitable for retrofit LED Lamp 9W/10W Lamp B22 base complete all as specified and directed by Engr-in-Charge.

Dismantling of old UNSV/rusted steel tubular poles of any size necessary disconnecting cables/over head condcutor and removing unserviceable pole from site complete all as specified and directed.

Supply and fixing Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0metres long) complete all as specified and as directed

Taking down old defective LT cable/conductor of any size and capacity complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 Sqmm 2 Core complete all as specified and directed by Engr-in-Charge.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4.0 Core complete all as specified and directed by Engr-in-Charge.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4.0 Core complete all as specified and directed by Engr-in-Charge.

Boring under Road / PCC by using manual tool for inserting PVC/GI pipe of 40mm size for protection of cable complete all as specified and as directed by the Engineer-In-Charge.

Trimming of trees all as along the LT line in such a way that there is clear distance of 3 meter between tree and electric line. The work will be executed to the entire satisfaction of Engr-In-Charge irrespective of the size of the tree branches etc complete all as specified and as directed. Note : (i) Tree branches etc will be left as it is the wood belongs to Cantt board/DEO and they will be responsible for the wood. (ii) Contractor will employ sufficient labour to complete the full one job with in about 15 days. (iii) Contractor will responsible for any type of accident while trimming the trees. (iv) Contractor supervisor will take proper shut down from MES installation before starting the work and clear it before resuming power supply, however full assistance will be provided by MES staff.

S & Fixing of lead acid battery, 180 AH, industrial heavy duty, 25/ 27 plates for DG set starting Model- MHD-FXPO-1800 of Exide only after disconnecting connection and taking down the unserviceable one.Make :- Exide

M&L Preparation of old (exposed) painted surface of existing (410 SP-31 ) Steel tubler poles /strut including cross clamps etc complete and applying two coat of aluminium paint above band/straps and painting of band/strap with paint of colour red post office and black numbering of pole at a height 1.5 m above GL as per existing having 15mm wide of poles at a heigth 1.5 M above GL as per existing having 15 mm wide and 50 mm bold letter compete all as specified and directed .

M&L for replacement of cross arms. bracing supports. clamps back plates. fabricated from strucural steel sections including nut bolts washers . welding. bending cold or hot drilling holes for bolts in any shape or size as indicated or directad and incclusive of two coat of aluminium paint over one coat of redoxide . including taking down of unsv items all as specified and directed .

M&L Plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) for coping around poles, including necessary form work & finishing the surface even and smooth complete all as specified and directed .

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth and getting out in soft/loose or any other type of soil for taking up or laying of cable all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and directed by Engr-in-Charge.

Removing excavated material not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above starting point complete all as specified and directed by Engr-in-Charge.

Supply and laying new dry river sand laid in trenches 8cm below the cable and 15cm above the cable and punned to 18cm as cable cushioning and covering complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement of brick well burnt locally available sub class 'B' laid over sand cushioning for cable protection in trenches width of brick perpendicullar to the length of cable including taking up of old UNSV bricks complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 10 sqmm 2 core in service connections , one twin core cable circular complete all as specified and as directed by Engr-In-Chage.

Supply and Fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 6.0 sqmm 2 core in service connections suspended by insulating hangers not more than 1 metre apart including 10sqmm suspension wire, one twin core cable circular complete all as specified and as directed by Engr-In-Chage.

Supply and Fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 2.5 sqmm 2 core in service connections complete all as specified and as directed by Engr-In-Chage.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate notless'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion

Supply & filling distilled water in batteries as required at various DG set installations all complete all as specified and directed by Engr-in-Charge.

Maintenance/ servicing of different capacity of DG sets by carrying out check as per manfacturers maintenance chart : (Note:Engine Oil and patrs shall be measured and paid seperately under respective item.) for DG set 12.5 KVA, Engine

ditto all as per item no 50 above but DG set 30 KVA , Engine

ditto all as per item no 50 above but 40 KVA, Engine.

ditto all as per item no 50 above but DG set 50 KVA, Engine.

ditto all as per item no 50 above but DG set 63 KVA, Engine.

Repair to PT pump & injector of 12.5 to 63 KVA DG Set by taking out carefully and refixing after caliberation at manufacturer dealer including replacement of u/s worn out parts. (Note: unserviceable parts shall be measured and paid seperately herein after as "SUPPLY ONLY".) fo

Supply only Gasket set

Supply only Screen filter

Supply only Cap filter

Supply only Barrel and sleeve

Supply only Plunger

Supply only Main shaft

Supply only Techno Shaft

Supply only Bush techno shaft

Supply only Bushing

Supply only Bearing

Supply only Gear pump

M&L for taking out radiator assy from existing DG of cap 63 KVA and repair to radiator tank, cleaning complete radiator with anti corrosion chemical, rewelding/ soldering for tubes / tank and refixing complete including replacement of hose pipe set with clamp connected to upper and lower tank for making complete water leak of radiator complete all as specified and directed by Engineer in Charge. for 63 KVA DG Set

ditto all as per item no 67 but 30 to 50 KVA DG Set

ditto all as per item no 67 12.5 KVA DG Set

Repair to oil cooler of capacity 63 KVA DG Set of make Cummins/ Kirloskar diesel engine water cooled with following part :complete all as specified and directed by Engineer in Charge.- (i) Element tube oil cooler- 02 Nos (ii) O' ring-02 Nos (iiI) Retainer O' ring-02 Nos (iv) Gasket-01 Set (v) Hose-01 set (vi) Clamp hose-02 Nos

M&L for taking out FIP from DG Set of capacity 63 KVA and replace the following items complete all as specified and directed by Engineer in Charge. (a) Injector nozzles (b) Deliverly valve (c) Bearing (d) Bearing bush (e) Niddle valve-06 Nos & proper calibeation and testing complete and refixing to the DG sets as directed.

Repair with the replacement of following wornout parts of alternator 24 Volts complete all as specified and directed by Engineer in Charge.:- (a) replacement of rotor (b) replacement of diode plate (c) rewinding of field winding (d) replacement of bearing (e) Replacement of regulator

Supply and replacement of water circulating pump/ water body suitable for 30 KVA to 40 KVA capacity DG Sets complete all as specified and directed by Engineer in Charge.

Supply and replacement of water circulating pump/ water body suitable for 50 KVA to 63 KVA capacity DG Sets complete all as specified and directed by Engineer in Charge.

Supply and replacement of grooved belt, of following sizes of capacity 12.5 KVA to 63 KVA DG sets of size A-47

Ditto all per item no 75 above but of size A-50

Ditto all per item no 75 above but of size B-35

Ditto all per item no 75 above but of size B-38

Ditto all per item no 75 above but of size C-48

S&F diesel fuel inlet/ oulet, breaded flexible pipe of 20 mm dia With clamps clips for DG Set any capacity all as specified and directed.

Dismantling the non functional turbo charger for 63 KVA DG set 1500 rpm, any Make from engine and replacing with new turbo assy complete, assembling , testing and commissioning at site complete all as specified and directed.

Dismantling the non functional turbo charger for 40 KVA DG set 1500 rpm, any Make from engine and replacing with new turbo assy complete, assembling , testing and commissioning at site complete all as specified and directed.

Dismantling the non functional turbo charger for 50 KVA DG set 1500 rpm, any Make from engine and replacing with new turbo assy complete, assembling , testing and commissioning at site complete all as specified and directed.

S & Replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 30/40 KVA complete all as specified and directed.( Make- Kirloskar / Cummins or equivalent as approved by GE)

S &F in Replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 63 KVA complete all as specified and directed.( Make- Kirloskaror or equivalent as approved by GE)

S & F in Replacement of alternator 24 Volt (for charging of battery) for 30 to 63 KVA DG Set complete all as specified and directed ( Make Lucas or equivalent as approved by GE)

Taking down the u/s self starter and repairs with rewinding to self starter of capacity 12/ 24 Volt by taking out old burnt out copper winding wire with super enamelled copper wire same gauge including replacement of u/s pinion, bush, solenoid coil, carbon brushes & tension spring complete and the DG Sets and testing complete all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 12.5 KVA complete all as specified and directed

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 30 KVA complete all as specified and directed

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 40 KVA complete all as specified and directed

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 50 KVA complete all as specified and directed

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 63 KVA complete all as specified and directed

M&L for replacement filling the Engine Oil DG set complete as specified and directed by Engineer in charge.

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 12.5 KVA complete all as specified and directed

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 30 KVA complete all as specified and directed

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 40 KVA complete all as specified and directed

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 63 KVA complete all as specified and directed

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 12.5 complete all as specified and directed

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 30 KVA complete all as specified and directed

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 40 KVA complete all as specified and directed

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 50 KVA complete all as specified and directed

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 63 KVA complete all as specified and directed

S & F in replacement changerover Switch 200 Amp to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Engr-In-Charge.

Supply and replacement of solenoid coil, 12/ 24 Volts , DC operated with lead and fixing clamps all as directed by Engr in Charge.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 63 KVA DG Set of make Kirloskar/ cummins all as specified and directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 40 KVA DG Set of make Kirloskar/ cummins all as specified and directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 12.5 to 30 KVA DG Set of make Kirloskar/ cummins/ Atul Shakti all as specified and directed.

Supply and filling coolant for DG set as per DG set manufacturers recommendations all as specified.

M&L for renewal of battery terminal heavy duty made out of brass suitable for 12 V lead acid battery.

M&L for battery lead made up of copper conductor wire of 23/.016 of any length as required at site for various D G Sets

Supply & filling distilled water in batteries as required at various DG set installations all as specified and directed.

Painting to DG set canopy with spray paint of size 12.5 to 63 KVA after cleaning, srapping and making the surfaces free from rust of main externally and painting with two coats synthetic enamelled paint in black/ blue/ red including marking/ writing on pipe complete as specified and directed by Engineer in charge.( NOTE:- Tenderers may note that amount of credit will be deducted from the total amount arrived at the time of Acceptance of contract.)

M/S CHAUHAN ELECTRIC WORKS

M/S MANSI TRADERS

M/s. S.S. Refrigeration, Bareilly