Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹6.1 LAccepted-Finance | ₹6.1 L | L-1 | Accepted-Finance L-1 |
| 2 | L-2₹6.4 LRejected-Finance N A | PALWAL | HARYANA | 121004 | ₹6.4 L | L-2 | Rejected-Finance Not L-1 |
Tender Value
₹6.9 L
EMD Value
₹14,000
Closing Date
22 Jan 2026, 10:00 amClosed
Executive Engineer Una Division
Executive Engineer Una Division HPPWD Una
Construction of Health and Wellness Centre Jakhera Tehsil and Distt. Una (HP) (SH Construction of New accommodation with attached toilet and Boundary wall (Deposit work)
2026_PWD_125862_1
Job 01 C/O Health and Wellness Centre Jakhera
Open Tender
Civil Works - Buildings
90 days
Una
As per bid document
8 documents required · 8 mandatory
₹350
₹14,000
3 Feb 2026
16 Jan 2026
22 Jan 2026
16 Jan 2026
22 Jan 2026
16 Jan 2026
Excavation in foundation trenches etcetera in all classification of soil such as pick work,jumper work,pick jumper work,blasting work and hard blasting work in dry or saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable material separately as directed and then returning the stacked soil in 15cm(fifteen centimeter) layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by the Engineer in charge including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials . .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Filling in plinth with sand under floor including watering ramming consolidating and dressing complete for all heights including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm ( thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforcement and plain concrete work in foundation footing and bases of columns etcetera and mass concrete including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness in all floor level including carriage of material entire within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.
Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in all work upto plinth level including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) of specified grade including the cost of centering and shuttering - All work up to plinth level : as per the direction of the Engineer-in- charge including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (one cement : two coarse sand : four graded crushed stone aggregate 20 mm(twenty millimetre) nominal size in suspended floors, roofs, landing and shelves and their supports balconies beams,girders, bressumers and cantilevers including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Steel reinforcement (Sail/RINL/Shyam steel Tisco, Jindal panther (JSPL) make)for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Brick masonry using second class common burnt clay building bricks in super structure up to all floor level in cement mortar 1:6 ( one cement : six sand) including curing complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Second class half brick work using common burnt clay building bricks in superstructure upto all floor levels in cement mortar 1:4 (1 cement : 4 sand) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing angle iron door,window,clerestory window frame manufactured from M.S.Angle iron section of 50X50X6 mm ,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-inCharge
Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required including providing and fixing of projecting lugs and handles prestaged bolting and fixing 4mm thick glass panes with sash putty for glazed windows or wire gauge of IS designation 85G with metal beading complete and frame with ISLC 75x40 mm Including Priming coat of red Lead paint or as directed bt engineering in charge complete.
Providing and fixing anodized aluminum sliding door bolt anodized transparent dyed to required colour shade with nuts and bolts screws etc complete i) 250x16 mm ( two hundred fifty and sixteen millimeter including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing 125mm size (one hundred twenty five millimeter) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing 250x10mm size (Two hundred fifty into ten millimeter) aluminum tower bolts(barrel type)anodized transparent or dyed to required shade and colour with screws etctra including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing paneled M. S. Grills of required pattern in wooden/Steel frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grills including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing aluminium sheeet 1mm thick in expansion joints vertically fixed with screws or nails complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx 10 mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and laying Duro stone vetrified tiles make of Kajaria, NITCO, Somany orient, RAK, Johanson & Johanson {(300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete any floor level/ height as per the direction by the Engineer in charge. including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing 100mm dia on wall face PVC D-plast of working pressure not less than 4.5 kg per sqm including filling the joints with approved adhesive complete.including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing holder bats clamps of approved design of GI or SCI embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregates 20mm nominal size 100 dia GI pipe.including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing on wall face PVC deplast accessories for rain water pipes including filling the joints with approved adhesive complete.PVC plain bend 100mm dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing aluminium work(Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed and shutter Portion Powder coated aluminium (minimum thickness of powder coating 50 micron)including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing and fixing 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- laminated conforming to IS : 12823, Grade 1, Type - II marked including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
6mm(six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement ;three sand) in all floor level.including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
15mm(fifteen millimeter) cement plaster in single coat on rough side of brick /concrete/stone walls for interior plastering up to floor all level including arises internal angles chamfers and or rounded angles not exceeding 80mm(eighty millimeter) (eighty mm) in girth and finished even and smooth with cement mortar 1: 6 ( one cement ; six sand) and curing complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
15mm (fifteen millimetre)cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering in upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) including curing and carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping dust loose materials and other foreign matter sand papered smooth to give final finish to the surface complete.including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Finishing wall with weather proof exterior grade emulsion of approved design( Apex ultima/heritage ) or its equivalent on undecorated wall surface(two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt,dust, and other foreign matter etc. including sand paper smooth complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Painting (two coat )excluding priming coat on new steel and metal surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt dust and other foreign matter with in ready mixed paint other than white including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement : 3:sand :6 graded stone aggregate 20mm nominal )including finishing the top surface of concrete smooth ncluding entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.
Providing under layer for plinth protection of 75mm thick (un consolidation) bed dry bricks/stone aggregate 40mm nominal size) well rammed and consolidating and grouted with fine sand including preparation of ground ncluding entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. NOTE: 1) All Type of material shall be arranged by the contractor vide Notification by Additional Secy.to the Govt. of HP vide letter No.PBW(B)©(17)2/0212 dated 7.8.2018 2) The rates shall be inclusing of all types of taxes including GST etctra) 3) The bidder are requested to submit their bid as per notification issued by the Principal Secy.PW to the Govt.of HP vide letter No.PBW(B) A(3)1/2020 dated 22.7.2020 & Govt. of HP vide letter No.PBW(B) A(3) 1/2020-1 dated 7.10.2021
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
BOQ_185466.xls
BOQ • 0.33 MB
SBD.pdf
Tender Documents • 3.02 MB
Download all tender documents and submit your bid