Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹20.6 LAdmitted-Finance | -23.80% | ₹20.6 L | L1 | Admitted-Finance |
| 2 | L2₹24.7 L+₹4.1 L (19.8%)Admitted-Finance 44 A LAXMI NAGAR JHOTWARA JAIPUR JAIPUR | JAIPUR | RAJASTHAN | 302001 | -22.81% | ₹24.7 L+₹4.1 L (19.8%) | L2 | Admitted-Finance |
| 3 | L3₹26.1 L+₹5.5 L (26.6%)Admitted-Finance | -14.99% | ₹26.1 L+₹5.5 L (26.6%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s Chhoga Lal Contractor L1 | S.S.BUILDERS AND CONTRACTORS L2 | M/S SINGODIA AND SONS L3 |
|---|---|---|---|---|---|---|
| 1.00 | DeluxeSlide:Deluxe Slide chute is made from stainless steel (SS) of 304 grade swith 16 SWG sheet.The structure comprises of 20 mm NB and 25 mm NB 'B' Class G.I. pipe. The centre support is made in 80 mm NB 'B' Class G.I. pipe and 15 mm NB G.I. pipe.The ladder cum railing is made up of 20 mm NB and 25 mm NB 'B' Class GI pipe. The platform is made up of 14 SWGA luminium sheet swith an tiskid for firm foot grip.There are train gular steps of 16 SWG sheets. The chute has its end such as it causes safe landing of the child.The pipe sare powder coated to avoid rusting. | 1 | EACH | 20,500 ₹20,500 Lowest | 26,125 ₹26,125 | 27,500 ₹27,500 |
| 2.00 | FRP wave slide :Providing and Fixing of FRP wave slide its required area 4.6 mtr x 0.9 mtr platform height should be 5' Ground Level and should be made by 32 mm NB and 25 NB and 20 mm NB pipe MS pipe.Slide length10' all components paint by PU paint in multi colours. | 1 | EACH | 22,000 ₹22,000 Lowest | 26,125 ₹26,125 | 27,490 ₹27,490 |
| 3.00 | CROSS TRAINER
Providing and fixing of Cross trainer of size not less than 1140mm (Length) x 625mm (Width) x 1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The Handle Frame shall be made up of at least 25NB “C” Class G.I. Pipe. The footrests shall be made from LLDPE/Aluminum casting material of size not less than 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 Micron thicknesses complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in- charge to fulfill the functional requirement. | 1 | EACH | 23,000 ₹23,000 Lowest | 44,840 ₹44,840 | 47,180 ₹47,180 |
| 4.00 | SEATED PULLER
Providing and fixing of Seated Puller of size not less than 2400mm (Length) x 800mm (Width) x 2000mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 100NB “C” class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The handle frame shall be minimum of 32NB “C” class G.I. pipe. The seat frame minimum of 50NB “C” class G.I. pipe, Closing Caps shall be made up of LLDPE/high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. | 1 | EACH | 21,000 ₹21,000 Lowest | 50,200 ₹50,200 | 56,640 ₹56,640 |
| 5.00 | CHEST PRESS
Providing and fixing of Chest Press of size not less than 2200mm (Length) x 800mm (Width) x 2000mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 100NB “C” class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The handle frame shall be made up from at least 32NB “C” class G.I. pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S. Sheet of size not less than 330mm X 300 mmX2mm thickness. Closing Caps shall be made up of LLDPE/high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. | 1 | EACH | 31,000 ₹31,000 Lowest | 53,808 ₹53,808 | 56,600 ₹56,600 |
| 6.00 | STANDING SEATING TWISTER
Providing and fixing of Seating & Standing Twister of size not less than 1700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist. Suitable for people of different ages except children. The main structure frame shall be made from G.I. pipe minimum of 100NB “C” class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be at least of 32 NB, 50 NB, and 25 NB shall be made from “C” class G.I. pipe. The handle frame of Seating & Standing twister of minimum 25 NB & Foot resting frame of seating side shall be made from “C” class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 250 mm diameters and 10mm thickness. Closing Caps shall be made up of high quality LLDPE/Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done by Pure Polyester powder of Ackzonoble/ Berger/ Nerolac Paint with 60 to 70 micron thickness complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in- charge to fulfill the functional requirement. | 1 | EACH | 21,000 ₹21,000 Lowest | 38,000 ₹38,000 | 42,700 ₹42,700 |
| 7.00 | SURFING BOARD
Providing and fixing of Surfing Board of size not less than 1150mm (Length) x 900mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 100NB “C” class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The footrests shall be made from high quality LLDPE/fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. | 1 | EACH | 21,000 ₹21,000 Lowest | 42,598 ₹42,598 | 44,840 ₹44,840 |
| 8.00 | SIT UP BOARD DOUBLE
Providing and fixing of Sit up Board double of size not less than 1580mm (Length) x 1400mm (Width) x 680mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 100NB “C” class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from “C” class GI pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. | 1 | EACH | 24,000 ₹24,000 Lowest | 42,598 ₹42,598 | 44,800 ₹44,800 |
| 9.00 | LEG PRESS : Area :- 0.40x1.77 Mtr
Safe Area :-
Providing and the center p
The bottom support thickness is welded the remaining outer frame pipe. the foundation used for Ǿ 80mm made from "C" c & 10 mm thickness, 25mmx25mm. to join the c 3mm thicness is used. the seats are size 330mmx3mm and size 250mmx 200mm. the footrests is made 130mmx311.77 mtr.-1x2.38mtr. fixing leg press made from "B" class G.I. p pipe is of Ǿ 115mm made from "C" class G.I. of M.S. round plate of Ǿ 250mm & at bottom. is of Ǿ 40mm made from "C" class G.I. foundation fixing is consist of three equal class G.I. pipe, M.S. round p x 3mm M.S. angle. centre pipe & outer frame seamless pipe of thickness fitted on the outer frame is made up of FRP material of 300mm of thickness 3mm & M.S. plate of is used to support it. from aluminum casting material, i 10mm & 5mm thickness. pipe, made pipe and 250mm, 10mm items i.e. plate of Ǿ 250mm angle. Ǿ 120mm & thickness 5 support its sizes are the frame of footrests consists of Ǿ 32mm made from "C" class G.I. pipe. closing caps made from top quality FRP material which is of 2 mm thickness. the inner bushes is made from seamless pipe, its diameter is 60mm & 5mm thickness. the pins used in are made up of Ǿ 25 mm hardened bright bar, the bearings used are of "6205zz" permanent lubricated sealed bearing of reputed make (FAG/SKF). the handles used are of rubber grip. high tensile steel with galvanized nut bolts are used for assembly. the serclips used for assembly are of Ǿ 25 mm. the powder coat is done by poly urethane & exoxy powder with 60-to-70-micron thickness. | 1 | EACH | 23,500 ₹23,500 Lowest | 39,425 ₹39,425 | 41,500 ₹41,500 |
| 10.00 | Providing & Fixing of Rotary Thrill Merry Go Round having require area of dia 1.5 meter & height of 1.0 meter from ground level . The center support is made with 60mm ODMS Apollo pipe . The heavy duty ball bearing 6312 of reputed make is attached for smooth rotation. The connecting support to seat shall be made with 32mm ODMS Apollo pipe . The Seat structure is made with 32mm & 25mm ODMS Apollo pipe. The 4 nos. of seats are made from fiber glass reinforce plastic of 3mm thick are attached with the structure . All Equipments should be paint by 2 layer of P.U.paint in multicolor or oven baked powder coated whichever is feasible and possible. | 1 | EACH | 15,000 ₹15,000 Lowest | 45,000 ₹45,000 | 50,100 ₹50,100 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
12 Aug 2026, 11:00 amClosed
EXECUTIVE ENGINEER MURLIPURA ZONE
JAIPUR NAGAR NIGAM PANDIT DEENDAYAL UPPADHYAY BHAWAN LALKOTHI TONK ROAD JAIPUR
BEAUTIFICATION WORK OF 12 B JDA PARK IN WARD NO. 03.
2026_DLB_582399_1
46 EXECUTIVE ENGINEER MURLIPURA ZONE
Open Tender
Civil Works
Percentage
120 days
JAIPUR
As Per Bid Documents
3 documents required · 3 mandatory
₹500
ONLINE PAY IN JAIPURMC WEBSITE
₹60,000
Yes
14 Aug 2026
5 Aug 2026
12 Aug 2026
5 Aug 2026
12 Aug 2026
6 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.Depth upto 1.5 m | 128.25 | Cum | 229.5 | ₹29,433.38 |
| 2 | Carriage of Materials by mechanical transport including loading, unloading and stacking ::Stone, boulders, gravelly material up to 5km | 128.25 | Cum | 239.78 | ₹30,751.79 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:5:10 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size) | 11.25 | Cum | 4,330 | ₹48,712.5 |
| 4 | Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand) | 40.5 | Cum | 4,860 | ₹1,96,830 |
| 5 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | 101.25 | Cum | 6,300 | ₹6,37,875 |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). | 6.9 | Cum | 5,910 | ₹40,779 |
| 7 | Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:6 (1 cement : 6 fine/ coarse sand) | 450 | Sqm | 213.5 | ₹96,075 |
| 8 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 4,500 | Kg | 144.5 | ₹6,50,250 |
| 9 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | 530 | Sqm | 204.5 | ₹1,08,385 |
| 10 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm). | 550 | Sqm | 93.1 | ₹51,205 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
BOQ_1034816.xls
BOQ • 0.34 MB
eproc46xenmpz.pdf
Tender Documents • 3.57 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .