Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹7,800
Closing Date
28 Sept 2026, 2:00 pmDue tomorrow
SE M1
NCTPS II
NCTPS II MI Circle - BM Dn.- Unit-II - Annual Overhaul of Flue Gas Duct - APH hopper area and ESP outlet to Chimney Inlet duct - Inspection, rectification of eroded Punctured duct portions by patch welding, renewal of damaged eroded bracing pipes
2026_EB_704517_1
NCTPS_II_UII_Spec_50_26_27
Open Tender
Maintenance Works
Works
NCTPS II
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹7,800
Yes
14 Sept 2026
14 Sept 2026
29 Sept 2026
14 Sept 2026
28 Sept 2026
14 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing scaffolding at flue gas duct work including the cost of consumables and T&Ps. | 40 | m2 | - | - |
| 2 | Charges for fabrication and erection of MS structural and patch up work. | 3 | MT | - | - |
| 3 | Supply of Mild Steel Plate (6mm thick) for flue gas duct in standard length and width. (If the materials are available in NCTPS Store at time of work execution, it will be supplied by TANGEDCO at free of cost and it will be excluded from contractor’s scope). | 2 | MT | - | - |
| 4 | Supply of various sizes if structural material like angle, Channel and beams. (If the materials are available in NCTPS Store at time of work execution, it will be supplied by TANGEDCO at free of cost and it will be excluded from contractor’s scope). | 1 | MT | - | - |
| 5 | Charges for complete inspection & welding of eroded/weaken welding joints and bracing pipe welding (by metal filling) in flue gas/primary/ secondary air ducts above from 9 Mtrs to 35 Mtrs elevation in flue gas ducts using welding rod as directed by the Engineer in charge including consumables and T&P's. | 100 | m | - | - |
| 6 | Supply of Bracing pipe of Dia 100 NB. Bracing pipe size:OD Ø114.3mm, thick- 6.02mm. (If the materials are available in NCTPS Store at time of work execution, it will be supplied by TANGEDCO at free of cost and it will be excluded from contractor’s scope). | 50 | m | - | - |
| 7 | Supply of Bracing pipe of Dia 80 NB. Bracing pipe size:OD Ø88.9mm, thick- 5.49mm (If the materials are available in NCTPS Store at time of work execution, it will be supplied by TANGEDCO at free of cost and it will be excluded from contractor’s scope). | 50 | m | - | - |
| 8 | Charges for leading, lifting and transportation of Iron and steel materials from stores to site including hire charges for mobile crane. | 3 | MT | - | - |
| 9 | Charges for renewal of eroded/worn out bracing pipe supports in dia 80 NB/100 NB (APH hopper area and ESP outlet to Chimney Inlet duct) in flue gas duct: This work involves cutting and removal of existing eroded/wornout bracing pipe supports in APH hopper area and ESP outlet to Chimney Inlet duct gouching and edge preparation for the existing gusset plates, notch preparation for bracing pipe supports and fixing with gusset as its original position and welding to complete as directed by Engineer in charge. including hire charges for T&P's and the cost of consumables. | 100 | m | - | - |
| 10 | Charges for Transportation of retrieved scrap material from 23 mtr to the NCTPS-II stores | 1 | opn | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_846855.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .