Repair and reconditioning of 50 H.P motor- 02 Nos rewinding and 01 No 50 H.P Pump repairing at Kuranguchavadi Booster Station Pump House

Amount

Charges towards the 50 HP Marathn make Motor 1455 RPM 01 No, 50 H.P CRI Make motor 1470 RPM -01 No = Total 02 Nos Motor disconnecting the power cable, Pulley bolts & nuts, motor stool loosening the fasteners and carefully lifting motor to our workshop.

Charges towards 50 H.P Beacon Make HSC Pump dismantling and loosening the pump fasteners and carefully lifting the impeller, impeller shaft, shaft sleeves, worn-out bearings, lifting the pump to our workshop.

Charges towards dismantling the 50 H.P motor bothside DE and NDE Side Stator coil burnt windings complete removing and cleaning the Stator core and rewinding by using 'H' Class copper wire as in the original winding with class 'F' Style special slot insulation providing pre-heating Varnishing with Dr.Beck Elmo Thermo F50 Special Varnishing mixed with thinner 205 and finishing varnishes for the over hanging portion of the winding including assembling and painting of the motor (Rate quoted after deducted retrived copper wire)

Charges for 02 Nos Rotor worn-out bearing seating area on both driving side and non driving side welding with suitable welding electrode and machining the rotor shaft and etc., complete

Charges for 02 Nos Motor worn-out motor DE, NDE side end sheild cover bearing housing fixing, logging and machining to suit the bearing OD size and fixing the bearing and etc., complete

Charges for supply and fixing of DE & NDE side bearings, Marathan motor Drive side SKF Make- 6313, Non Drive side SKF-6312 bearing, CRI motor drive side & Non Drive end both side 6313 SKF Make bearing fixing with all allied works and etc., complete

Charges towards 50 H.P Beacon Make Pump shaft repair and reconditioning by using of suitable welding electrode and the cost for machining of SS Shaft which is suitable for fixing the bearing seating for both DE and NDE side

Charges for the pump impeller cleaning and welding with Bransoide brass welding rod using and impeller reconditioning and balancing and etc., complete

Charges towards supply and fixing of fabricated rope gland 01 set

Charges towards Drive end, Non Drive end side bearing housing welding machining

Charges towards Supply & fixing of pully coupled Rubber coupling Fenner Make F.90 Size

Charges towards Supply & fixing of CE Make 200 Amps manual Changeover switch providing and necessary termination and etc., complete

Charges towards supply & fixing of pressur cauge at delivery line and etc., complete

Charges for Assembling the pump casing with necessary fire-ply gaskets and bolt & nuts with proper lubrication complete

Charges for mounting of pump in pumphouse and connecting them in both suction and delivery side with necessary all gaskets and bolt & nuts and etc., complete

Charges for coupled the motor and pump for checking the alignment for zero- zero accuracy and providing terminal connection to the motor and commisioning of pumpset successfully as directed by the engineer with including cost of conveyance from our workshop Mettur Dam to Kuranguchavadi, Salem

Charges towards supply and laying of 4C X 25 Sq.mm ISI Copper un Armourd cable laying overhead and wall to threw the metering board connecting and etc., complete

Charges towards the providing of new earth bits as per the standard engineering practices and etc., complete

Charges towards supply of 03 Nos 300 Amps Fuse carrier and fixing EB Post and etc., complete

Charges towards Supply and fixing of Tubeling and copper chock

Charges towards supply and fixing of ceiling fan

Charges towards supply and providing of 50 Sq.mm Lug- 08 Nos, necessary bolt & nut and fuse wire and etc., complete

Sri Balaji Electricals And Mechanical Works (BID ID -1546715)