REPAIR/MAINT OF LT PANEL, APFC PANELS, HT BUS BAR PANELS ALONGWITH ALLIED SERVICES AT CANTT AREA UNDER GE (I) KANPUR

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, foundation filling of poles or stays and for rerouting of cables complete all as specified and directed.

Returning filling including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable complete all as specified and directed. Note:- Punned thickness shall be measured and paid.

M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required complete all as specified and directed.

M&L for pre cast cement concrete ( 1:4:8) type D2 (using 40mm graded stone aggregate) for foundation filling of poles or LT panels as mass concrete complete all as specified and directed.

M&L for pre cast cement concrete ( 1:3:6) type C2 (using 40mm graded stone aggregate) for foundation filling of stays complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground, floors or pavings not exceeding 15 cm thick below or above ground level complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floor / hard-standing, surface finished even and smooth without using extra cement to match with the existing surface complete all as specified and directed.

M&L for drilling manually in soft / loose soil under road / hard standing / culvert / nala of suitable bore for protection cable & pipe upto 80 mm bore complete all as specified and directed. Note: Depth of bore shall not be more than 1 Mtr from original ground level.