Ajmer Group of Workshop: Repair & maintenance of electrical assets of buildings & area under jurisdiction of SSE/Loco motor, SSE/Carriage motor & SSE/Power House, Ajmer. (For Two Years)

1-Assemble, fixing, hanging & connection of ceiling fans, exhaust fan,

Assemble, fixing, hanging & connection of ceiling fans, exhaust fan, fittings as per specification.

2-Supply & fabricated down rod suitable size with hole "A" class GI pipe

Supply & fabricated down rod suitable size with hole "A" class GI pipe for hanging fan as per specification

3-Supply & fix rubber reel with nut, bolt, washer & split pin as per

Supply & fix rubber reel with nut, bolt, washer & split pin as per specification.

4-Supply and testing of fan capacitors capacity 3.15Mfd as per

Supply and testing of fan capacitors capacity 3.15Mfd as per specification.

5-Replacement of Fan capacitor in existing fan (capacitor will be

Replacement of Fan capacitor in existing fan (capacitor will be supplied by railway) as per specification

7-Sub Main wiring

8-Wiring Accessories

9-Supply, fixing, test & commissioning of PVC modular box with suitable

10-PVC Conduit pipe

11-PVC Casing caping

12-SPN RAY Roll plug socket.

13-TPN RAY Roll plug socket.

14-Supply, install, test & commissioning of 4 pole MCCBs as per

15-Supply, install, test & commissioning of Distribution Board (DB) as

16-Supply, install, test & commissioning of MCBs as per specification

17-Supply, install, test & commissioning of RCCBs as per specification

18-Supply, install, test & commissioning of 4 pole RCBO. as per

19-EARTH STATION

20-Supply of material & connection of electrical fittings / Assets with

Supply of material & connection of electrical fittings / Assets with PVC flexible cable size 1.5 sqmm (P+N+E)

21-Cable Laying as per specification

22-Supply, straining & commissioning of 6 wire catenary as per

23-Cleaning of electrical equipments (Fan, TL fitting etc.).

Cleaning of electrical equipments (Fan, TL fitting etc.).

24-HT & LT cable end box & Jointing kit as per specification

26-Street light controller as per specification

27-Tree trimming 1 Big Branch consisting of 5 small sub branch as per

Tree trimming 1 Big Branch consisting of 5 small sub branch as per specification.

28-Supply, install, test and commissioning of power contactor 170 Amp,

Supply, install, test and commissioning of power contactor 170 Amp, 4 Pole, 440Volt, 50 Hz, Coil voltage 110 Volt AC with 2 no+ 2 nc as per specification

29-Supply, install, test and commissioning of power contactor 170 Amp,

Supply, install, test and commissioning of power contactor 170 Amp, 4 Pole, 440Volt, 50 Hz, Coil voltage 230 Volt AC with 2 no+ 2 nc as per specification

30-Supply, install, test and commissioning of power contactor 250 Amp,

Supply, install, test and commissioning of power contactor 250 Amp, 4 Pole, 440Volt, 50 Hz, Coil voltage 230 Volt AC with 2 no+ 2 nc as per specification

31-Supply, install, test and commissioning of power contactor 70 Amp, 4

Supply, install, test and commissioning of power contactor 70 Amp, 4 Pole, 440Volt, 50 Hz, Coil voltage 110 Volt AC with 2 no+ 2 nc as per specification

32-Supply, install, test and commissioning of power contactor 110 Amp,

Supply, install, test and commissioning of power contactor 110 Amp, 4 Pole, 440Volt, 50 Hz, Coil voltage 110 Volt AC with 2 no+ 2 nc as per specification

33-Supply & providing of cable marker the Cable marker shall be made

Supply & providing of cable marker the Cable marker shall b e made o f M S Sheet 33 1.5mm thick size 150X100mm welded with 12mm Dia MS rod 85 cm. Long. The lower end of rod should be turned in hooks shape and attached with the cable at the time of laying as per specification.

34-Supply, install, test and commissioning of Push Button (1 NO +1 NC)

Supply, install, test and commissioning of Push Button (1 NO +1 NC) as per specification.

35-Supply, install, test and commissioning of three phase DOL Starter

Supply, install, test and commissioning of three phase DOL Starter 5HP as per specification.

36-Cleaning of solar PV module at installed under jurisdiction of

37-Laminated vinyl board (ACP sheet with MS frame and aluminium

Laminated vinyl board (ACP sheet with MS frame and aluminium angle moulding) MS frame duly painted with anticorrosive paint size 1"x1" square thickness 1.5mm & aluminium angle moulding thickness 1mm and all sharp edges should be remove on board frame.