Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAccepted-Finance | L1 | Accepted-Finance Qualified as Rank L1 |
Tender Value
₹4.6 L
EMD Value
₹9,149
Closing Date
23 Apr 2026, 3:00 pmClosed
Executive Engineer(E)
Executive Engineer (E), PWD HMED SW (NCTD), Ist floor, Samaj Sadan, DAP Lines, Vikas Puri, New Delhi
ARMO various E and M Services installed at Rao Tula Ram Memorial Hospital, Jaffarpur, New Delhi (SH SITC of Pulp Valve in the existing Sewage Transfer Line and Replacement of Damaged/ Rusted Valves/ Pipes in STP/ ETP Plant)
2026_PWD_289907_1
148/EE(E)/PWD HMED SW/2025-26 (3nd call)
Open Tender
Electrical Works
Works
30 days
Rao Tula Ram Memorial Hospital
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹9,149
30 Apr 2026
15 Apr 2026
23 Apr 2026
15 Apr 2026
23 Apr 2026
15 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supplying, Installation, Testing and Commissioning of 200mm Dia Pulp Valve CI Body in the existing Line including cutting/ modification of line for fitting the valve complete etc. as required. | |||||
| 2Supplying, Installation, Testing and Commissioning of fixing of following dia. Gun metal Horizontal Non Return valve (screwed type) on the existing pipeline, including testing & Commissioning etc. complete including dismantling of existing valve as required. 50mm Dia | |||||
| 3Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete including dismantling of existing pipe as required. 50mm Dia | |||||
| 4Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | |||||
| 5Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth. Cement mortar 1:4 (1 cement : 4 coarse sand) | |||||
| 6Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work;using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M20 grade with minimum cement content of 270 kg /cum | |||||
| 7Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns | |||||
| 8Cement Plaster (In Coarse Sand) 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) | |||||
| 9Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450 mm internal dimensions | |||||
| 10Cleaning of Aeration Tank , including removal of sludge and debris with Sucker machine / manpower and disposition of waste complete as required | |||||
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
BOQ_384922.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .