SPECIAL REPAIR TO NIMA MESS INCL BOUNDARY WALL UNDER AGE B/R-III OF GE(S) MEERUT CANTT

Amount

Materials & labour for complete removal of existing treatmemt of wall and applying two coat of cement base paint of any colour over a coat of primer complete all as specified & directed.

Material & labour for applying two coat of oil bound distemper on wall incl preparing the surface by applying 1 mm thick wall care putty incl rubbing with sand paper to prepare smooth surface after complete removal of existing treatment of walls complete all as specified and as directed.

Material & labour for applying wall care putty incl rubbing with sand paper to prepare smooth surface on ceiling complete all as specified and as directed .

Material & labour for applying two coats of weather proof exterior emulsion paint over & including one coat of primer complete all as specified & directed.

Materials & labour for preparation of old treated plastered surface of ceiling etc and applying one coat of white wash complete all as specified & directed.

Materials and labour for preparation of old painted wooden surface of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Materials and labour for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Materials and labour for preparation of new plastered or unplastered undecorated surfaces & applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of any description,not otherwise described, over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed.

Materials and labour for applying two coats of synthetic enamel painting over a coat of red oxide primer surfaces of any description,not otherwise described, over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed.

Material & labour for rendering 15mm thick in CM (1:6) on brick work or concrete surface of wall and finished surface even and smooth complete all as specified and directed.

Materials and labour 10mm thick rendering in cm 1:3 on fair face of concete surface finished even and smooth without using extra cement as in ceiling surface complete all as specified and directed.

Materials & labour for preparation of new plastered surface of ceiling etc and applying three coat of white wash complete all as specified & directed.

Materials and labour for provision of aluminium anodised framed work (snap grid) suitable for size as in false ceiling of size 600mmx600mm consisiting of following :- i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS:737-1986. ii) The snap grid consist of aluminium anodised main/cross tee of size 36.5mmx25mmx1.40mm thick and 25mmx25mmx1.40mm thick respectively,iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of supply and fix 2mm dia mild steel GI wire iv)The main and cross tees shall be jointed at junction/crossings with aluminium anozied angle bracket,of size 15mmx15mmx1.40mm thick fixed with suitable mild steel, bolts,nuts and washers all as manufacturer's instructions v) The snap grid(main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mm x 25mm x 1.4mm thick vi) Size of the snap grid shall be 605mm x 605mm vii) Minimum average thickness of anodising shall be 15 micron complete all as specified & directed. (Work at height of min 10 m to 15m from ground lavel)

Supply and fix 4mm thick Gypsum/Everest Board in ceiling size 60cmx60cm fixed to aluminium snap grid complete as per manufacture's instructions all as specified and directed. (Note- Work is to be executed at 10 to 15 mtr height)

Supply and fix 4mm thick Gypsum/Everest Board in ceiling size 60cmx60cm fixed to aluminium snap grid complete as per manufacture's instructions all as specified and directed.

Supply and fix manglore pattern pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50mm thick of green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix for pre-painted galvalume zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

Material and labour for rolled MS sections as in main and cross beams, trusses,hip and jack rafters; purlins,pillars where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St. - 240. complete all as specified and directed.

Materials and labour for 5mm thick prelaminated PVC sheet in strips & channel feathered edges for fixing on semi solid PVC wall lining, insulated PVC wall lining and solid PVC partitions inclusive of solvent complete all as specified and directed.

Dismantling wall and ceiling boards/slabs/blankets any thickness incl cover fillets complete all as specified and directed.

Supply and fix second class HW plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fix 35mm thick second class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply & fix 35mm thick 2nd class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc, without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specified in SSR Part-I section 8 supplied and fitted to chowkhats complete all as specified and directed.

Material & labour for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC, ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement as shown drawing on page No 156 of SSR 2010 (Part-II).

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed.

Supply & fix 25mm dia stainless steel curtain rod fancy type vista pattern of approved finish of superior quality including fancy type knobs at both ends, bracket for supports etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Supply and fix light shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement using pigment to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply and fix light shade vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick CM1:4 complete all as specified and directed.

Material & labour for 16-18mm thick granite stone (of any type) work in wash basin counter, window cills and like in cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade of granite ( Ruby Red Shade) over and including 15 mm thick screed bed in CM 1:4 including grinding edge to smooth finish complete all as specified & directed.

Material and labour for providing reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone agg) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for use & waste form work to soffits of suspended slabs (horizontal or sloping) such as roof slab, floor slab, landing and similar work not exceeding 200 mm thick for rough finished flat surfaces of concrete complete all as specified and directed.

Material & labour for TMT bars 6-8mm dia and over cut to length bent to shape as required inculding cranking bending spirally hooping for columns hooking ends etc and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platforms and the like, bedded over and including 10 mm thick screed in in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone, including rounding of edges and drilling hole for gas pipe complete all as specified and directed.

Material and Labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 3 % by weight of cement finised even and smooth without using extra cement on roof surface and wall (WPC shall be measured and paid seperately) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material and Labour for cleaning of plastered surface and aplying priming coat using bitumenous primer @ 0.30 Kg/Sqm followed by evenly a tack coat @ 1.2 Kg/Sqm using 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyster reinforced of weight not less than 3 Kg/Sqm unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer's instructions and complete top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.2 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqmcomplete all as specified and directed.

Materials and labour for 450 x 300 x 6 to 7 mm thick coloured glazed ceramic tiles, in vertical surfaces such as dado, skirting set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles incl rendering, 10 mm thick in cm 1:4, on wall surfaces finished even and rough without using extra cement to receive tile complete all as specified and directed.

Materials and labour for coloured non skid ceramic joint free tiles area of each tiles exceding 0.06 sqm but n exc 0.11 sqm , 7mm thick in floors etc, set and jointed in cement slurry and pointed in white or coloured cement to match over and incl screed bed 15 mm thick in CM (1:6), surfaced finish even and rough to recieve tile finish as in flooring complete all as specified and directed.

Material and labour for 18/19 mm thick block board interior grade commercial water proof fixed with screws to timber frame work for cabinet, both sides covered with 0.80mm thick decorative laminates, "Mica" type 1 of surface finished, colour and pattern as approved fixed with approved adhesive as per manufacturer’s instructions including taking down old unserviceable boarding of any description complete all as specified & directed.

Supply and fix auto hinges for cabinet case complete all as specified and directed. Make- KARF /HETICH or as approved by GE.

Supply & fix stainless steel plain basket of size 42x50x15cm (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified & directed.

Supply & fix stainless steel partition of size 42x50x15cm (Make: Everlite/ Slim line Peacock/Fabshine complete) all as specified & directed.

Supply & fix stainless steel cutlery of size 42x50x15cm (Make: Everlite/ Slim line Peacock/Fabshine) complete all as specified and directed.

Supply & fix stainless steel grain trolly with stand of size 52x42x25cm (Make: Everlite/ Slimline Peacock/Fabshine) complete all as specified and directed.

Supply & fix stainless steel cup & soucer, trolly of size 42x50x10cm (Make: Everlite/ Slim line Peacock/Fabshine) complete all as specified and directed.

Supply & fix stainless steel Plate basket of size 42x50x15cm (Make: Everlite/ Slim line Peacock/Fabshine) complete all as specified and directed.

Supply & fix 50cm long telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed (Make: Nixon/Radol/Ozone Ultima ) complete all as specified and directed.

Supply and fix in repair 0.80mm thick laminated sheet (Mica) paste on board/plywood with glue adhesive complete all as specified and directed.

Supply and fix 150mm size stainless steel bright finish handle for cabinet shutter complete all as specified and directed.

Supply and fix 125mm size aluminium alloy handles cast type anodized complete all as specified and directed.

Taking down / removal of wall tiling, terrazzo topping, plaster and kota stone from vertical surface any type incl cement mortar bedding upto brick surface for new tile work and removing rubbish off the premises complete all as specified & directed.

Supply and fix in repair pillar taps , cast copper alloy with capstan heads CP screwed down high pressure, with or without 'Hot or Cold' with long screwed shanks and fly nuts , screwed for iron pipe 15 mm bore complete all as specified and directed

Supply and fix in repair 15 mm bore stop cock/angle cock, cast copper alloy, with long shank, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron or for union including CP flange complete all as specified and directed.

Supply and fix bib tap, CP cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

Supply & fixing brass chromium plated shower rose 100mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed.

Supply & fix 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete all as specified and directed.

Supply and fixing PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity low level, white with inlet, ball valve float,flush pipe and handles including brackets fixing plug and 60mm long brass screws etc complete all as specified and directed

Supply and fix vitreous china, wash hand basin, white, flat back, size 550 x 400 mm including angle iron brackets, cutting for and pinning in ends of brackets or eracting stands but excluding of fixing of supply and waste pipe fixed in repair complete all as specified and directed.

Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern) white with P or S trap including connection to trap and cistern and flush pipe excluding flushing cistern) including PVC white seat cover, closed pattern fixed with aluminium hinging device and making good to disturbed surface of floor to match the existing complete all as specified and directed.

Supply and fix in repair plastic seat cover water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Supply & fix in repair chromium plated ABS jet health fauset including stainless steel tube of standard length fixed in WC seats complete all as specified and directed.

Supply and fix in repair 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall. including mild steel clamp , nut & bolts etc. complete all as specified and directed.

Supply and fix in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Supply and fix in repair 110mm bore PVC (SWR) junction single, (single T) equal or unequal jointed with cement solvent complete all as specified and directed.

Supply and Fix in repair 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall. including mild steel clamp , nut & bolts etc. complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) junction single, (single T) equal or unequal jointed with cement solvent complete all as specified and directed.

Cutting chases pinning in, in brick walls, making good to facing where required & pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and making good, cutting not exc 10 cm girth all as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections of walls, ceiling, floor etc of 15mm dia complete all as specified & directed.

Taking up or down steel tubing and connections of walls, ceiling, floor etc of 20mm dia complete all as specified & directed.

Supply and fix in 15mm bore GI water tubing ,galvanised, Medium grade, with all fittings fix to wall , ceilings or laid in floor complete all as specified and directed

Supply and fix 20mm bore G I water tubing Medium grade,gavanised with all fittings fix to wall,ceilings or laid in floor complete all as specified and directed

Material and labour 50mm thick PCC (1:2:4) type using 12.5mm graded crushed stone aggregates as in sub base complete all as specified and directed.

Material and labour for rendering, 15 mm thick on fair faces of brick wall or concrete surfaces in cement mortar 1:4, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for brick work with fly ash bricks built in CM 1:6 with sub class B, brick straight or curved on plan exceeding 6m mean radius complete all as specified and as directed.

Demolition of brickwork or stone /boulder masonry built in cement mortar or cement lime mortar incl all quions, arches, pillars etc. but excluding ashlar facing precast concrete articles complete all as specified and directed.

Taking down cement plaster/terrazo plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete as specified and directed.

Demolition of RCC jalli in any position incl removal from site upto 500m all as specified and directed.

Materials and labour for providing precast cement concrete louvres and jallies type B1, 1:2:4 (using 12.5 mm graded crushed stone aggregate) set in CM 1:4 , 25mm thick (measured solid), including all mouldings and design as approved by GE all as specified and directed.

Supply and fix 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix galvanised MS wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply & fix in repair for steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm all round including iron mongry etc complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit .

Supply & fix steel window or ventilators fixed type wire guage and top hung glazed shutters with glazing bars complete all as specified and directed.

Materials and labour for machine pressed precast concrete interlocking paver block 60mm thick , any size and shape conforming to IS 15658-2006, M-35 grade with grey cement and pigment over 25 mm thick (average) stone dust cushioning complete all as specified and directed.

Material and labour PCC ( 1 : 4 : 8 ) Type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Supply and fix machine pressed precast PCC kerb stone blocks of approved size type B-1, 1 : 2 : 4 ( using 20mm graded crushed stone aggregate ) set in CM 1 : 4 complete all as specified & directed.

Material and labour for applying two coats of synthetic enamel painting to cement concrete surface over 10cm width or girth on kerb stones complete all as specified and directed.

Material and labour for Seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

Material and labour for provision of powder coated aluminium anozied framed work (snap grid) suitable for size as in false ceiling of size 1800mmx1200mm consisting following as all as directed;-i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS:737-1986. ii) The snap grid consist of powder coated aluminium anodised main/cross tee of size 36.5mmx25mmx1.40mm thick and 25mmx25mmx1.40mm thick complete all as specified and directed. (average thickness of powder coating 550 micron)

Material and labour for POP work in border/moulding of ceiling including all material , labour and scafolding, complete all as specified and directed

Material and Labour for 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination fixed with screws including 1mm thick PVC lipping on all exposed edges including taking down old worn out boarding of any description complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply and fix in repair kitchen sinks made out of stainless steel 1 mm thick with plugs, washers and waste including bedding in CM on to dwarf wall or including fixing cantilever brackets and waste coupling, connecting union to pipe overall size 1140 mm x 510 mm bowl siz 560mm x405mm complete all as specified and directed.

Supply and fix in repair stainless steel plate rack of size 900x600mm including shelves , made out of 0.80 mm thick stainless steel sheet complete all as specified and directed

Dismantling existing water tanks capacity exc.250 Ltrs but n.exc 500 ltrs, removing from site complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed.

Supply and fix in repairs ball valves high pressure PTMT with epoxy coated polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed and suitable for 20 mm bore GI pipe, complete all as specified and directed.(min Wt-210 gms)

Dismantling of Asbestos cement (corrugated , semi corrugated etc) sheets in roof covering complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise specified for complete all as specified and directed.

Dismantling of wooden or wrought iron or mild steel work of any description but fillet rails,post rafter purlin etc under 40 sqcm in section (unframed) complete all as specified and directed.

Taking down carefully any type of battens or except conduit point wiring with batten / conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer- in-Charge.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly for One tube light/Bulb/Bell/ point controlled by one, one way switch 05/06 Amps complete all as specified and directed.

All as per serial item No108.00 here -in- before but with One ceilling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 108.00 here -in- before but with One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 108.00 here -in- before but with One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 108.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.50 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :- One Bulb/Tube light/bell/street light point controlled by one, one way switch 05 / 06 Amps.

All as per item No 113.00 but above one ceilling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

All as per item No 113.00 but above one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 113.00 but above one 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 113.00 here -in- before but with 2.5 Sqmm nomnla cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Supply and fix modular switches 1 way 6A, 1 module single pole (as per sample), 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix modular socket outlet, 6A-2/3 pin combined 2 module, 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix modular switches 1 way 16A, 1 module single pole (as per sample), 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix modular socket outlet, 6A/16A-2/3 pin combined 2 module (as per sample), 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix modular bell push 6A 1 module complete all as specified & directed by Engr-in-Charge.

Supply and fixing bell multi music type, 240 volts AC complete all as specified and directed.

Supply and fix modular ceiling fan steped regulator 120W 2 module switch/socket type AC 240 volts complete all as specified and directed. By Engr-in-Charge

Supply and fix modular white cover plate with frame of standard size as per existing for 1 modules complete all as specified and directed.

Supply and fix modular white cover plate with frame of standard size as per existing for 3 modules complete all as specified and directed.

Supply and fix modular white cover plate with frame of standard size as per existing for 4 modules complete all as specified and directed.

Supply and fix modular white cover plate with frame of standard size as per existing for 6 modules complete all as specified and directed.

Supply and fix modular white cover plate with frame of standard size as per existing for 8 modules complete all as specified and directed.

Supply and fix modular white cover plate with frame of standard size as per existing for 12 modules complete all as specified and directed.

Supply and fix modular metal flush box 1 module complete all as specified and directed by Engr-in-Charge

Supply and fix modular metal flush box 3 module complete all as specified and directed by Engr-in-Charge

Supply and fix modular metal flush box 4 module complete all as specified and directed by Engr-in-Charge

Supply and fix modular metal flush box 6 module complete all as specified and directed by Engr-in-Charge

Supply and fix modular metal flush box 8 module complete all as specified and directed by Engr-in-Charge

Supply and fix modular metal flush box 12 module complete all as specified and directed by Engr-in-Charge

Supply and fix in repair lamp holder (Angular/Straight), insulated body, with back plate for batten fitting all as specified and directed by Engineer-in-Charge.

Supply and fix LED lamp 10 watt complete all as specified and directed.

Supply and fix LED CRCA batten with decorative end cap complete with retrofit T8 polycarbonate tube 20 watt , 230 volt, surface mounting with integrated electronic driver high transculent frosted diffuser, bipin holders, connector block etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Havells Model PHOTON ULTRA 2.01213T8SSTL20W for Tube Havells Model NO LHFXCENNTN1W020 for fitting or equivalent to Crompton/Havells/Wipro

Supply and fixed LED security light 45 watt pressure die cast housing with epoxy power coated dark graphite grey colour finish, polycarbonate cover with individual LED lenses including provision of 32mm bore light grade GI tube mounting bracket 0.90m long made to shape bend to 140 degree in L shape and fixed to wall by means of 02 Nos 40x5mm flate iron clamps nuts, bolts and washers etc and provision of weather proof PVC insulated copper conductor cable 2.5 Sqmm 2 core as required for connection all as specified and directed. (Make :Wipro/Crompton/Havells

Supply and fixing in repair LED mirror light 10W including rod complete with all accessories internally prewired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make - Havells/Crompton/Wipro.

Supply and fixing LED panel recess/surface/suspended mounting 36W Ultra modern designed architectural 2x2 LED luminaire which provides soft light and glare free symmetrical illumination including all accessories for fixing in false ceiling/ceiling/in hanging position all as specified and directed by Engineer-in-Cahrge. Make - Crompton/Wipro/Bajaj.

Supply and fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

Supply and fix off load changeover switch in sheet metal enclosure with front operating system powder coated factory made of capacity 200 Amps 4 pole complete with fixing arrangement as directed on site. Make : Havells/HPL/Siemens/L&T.

Taking down carefully unserviceable sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white/colour washing/distempering etc to match the existing complete all as specified and directed by Engineer-in-Charge.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note : One meter of conduit along with 2x6 sqmm wire and one 6 sqmm earth sahll be measured as one unit length.)

Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS cable with and including continuous earth wire of size 4.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note : One meter of conduit along with 2x4 sqmm wire and one 4 sqmm earth sahll be measured as one unit length)

Supply and fixing vertical type IP-43-IK09 protection metal door DB 200 Amps rated copper bus bar, pan assembly etc with interlocking links, blanking plates cable ties identification labels TPN 4 way, DPX 125+12 modules with provision to mount DPX 160 MCCB 4 pole as in comer and SP/DP MCB as outgoing complete all as specified and directed. Make-Legrand/Schneider/ABB

Supply and fix MCCB 4 pole 160 Amps lcu=16KA, 415 volts, 50Hz type DPX frame size 160 with adjustable thermal and magnetic release complete all as specified and directed.

Supply anf fix in wall air cooled split unit indoor/outdoor air conditioner electric driven, single phase of capacity of 1.5 TR, BEE 5 Star rated withcordless remote control unit complete all as specified and directed. Make:- Voltas/Samsung/Blue star/Hitachi

Supply and fixing voltage stalizer for automatic operation single phase naturally air cooled inddor type and design for input variation between 170V to 250 V with output voltage stabilized at 230 with accuracy of ± 2.5% and of capacity 3 KVA. Complete all as specified and directed.

Supply and fixing ceiling fans 1200 mm sweep, 230 volts, 50 Hz not less than 2 star rating complete with downrod as per site requirement & incl connection with 3 core multistranded copper wire of suitable size from ceiling rose to fan connector complete all as specified and directed.

Supply and fix exhaust fan 300mm sweep metallic body with louvers, 240 volts AC single phase, 50 Hz, 1400 RPM, ISI marked including necessary work for fixing exhaust fan inside and lours outside making connection , including flexible cable , nut boltsand other material required complete all as specified and directed .

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white/colour washing/distempering etc to match the existing complete all as directed by Engineer-in-Charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way with 100 Amps rated copper bus bar and IP-43 & IK 09 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 100 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge.

Supply and fixing MCB, SP, AC, 240 volts of 06 to 40 Amp C curve, 10 kA, confirms to IS/IEC 608981:2002 and making connections complete all as specified and directed.

Supply and fixing MCB, SPN, AC, 240 volts of 40 to 63 Amp C curve, 10 kA, confirms to IS/IEC 608981:2002 and making connections complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts of 40 to 63 Amp C curve, 10 kA, confirms to IS/IEC 608981:2002 and making connections complete all as specified and directed.

Supply and fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engr-in-Charge.

Taking out old unserviceable supplying, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 70 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Supplying, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 70 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the length of the brick of whole sub class 'B' bricks laid on edge for protection of cable complete all as specified and directed.

Supply/laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

Removing excavated material ( soil ) not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc including taking down old u/s cable complete all as specified and directed.

Supply and fixing PVC insulated wire copper conductor 3 core 2.5 Sqmm for connetion junction box to street light ocmplete all as specified and directed.

Supply and fixing bracket made of 32/40mm bore or higher size to suit the opening of fttings light grade 1.00 mtr length suitableknob for both side suit top on the steel tubular pole complete with nuts, bolts and washers complete all as specified and directed.

Supply and fixing junction box made out of 2mm thick CRCA sheet powder coated suitable for pole mounted outdoor type ocmpelte with F1 clamp 40mmx4mm with nuts, bolts, washers and including aluminium bus bar 4 pole x 40 Amp and one MCB SP 10 Amp, 10 KA complete all as specified and directed.

Supply , laying and fixing 40mm bore galvaised steel tubes with all fittings, light grade, laid in trenches for cable protectin complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. (Note- After completion of work if desired result of earthing is not obtained the earthing shall be redone without any extra cost to Govt.)

Supply , transporting, erecting and fixing steel tubular swaged poles type 410 SP-31 (9.00 mtr long) complete with cast iron /mild steel base plate, CI finial, taper plug, bolts, nuts and screws as specified, including necessary excavation and earth work in soft/loose soil, PCC 1:3:6 type C2 (using 40mm graded crushed stone agg) in foundation and around poles and PCC 1:2:4 type B1 (using 20mm graded crushed stone agg) all as per SSR Part-I clause 19.51 as in plinth block duly finished even and smooth without using extra cement, disposal of surplus soil to a distance not exceeding 50m and depositing where directed, painting exposed surfaces of steel tubular poles with two coats of aluminium paint over one coat of red oxide primer and black bituminous paint on steel surfaces embedded in concrete painting embedded portion of poles with one coat of bituminous paint) complete all as specified and directed. Make : M/S India tube & Co, M/S Jai Bharat Poles, M/S Sohan Lal & Sons

Tayal Builders

Shikha Enterprises

Rajneesh Jain

Jain Engineering Works

CHAUDHARY FURNITURE HOUSE

BASANT ENTERPRISES

m/s gupta construction