ARC for Design,Engg,Supply,Erection including Civil Works,Testing,Commissioning of construction of new lines/diversion of existing lines/cons of new 33KV Bay/refurbishment existing 33KV bay to effect power evacuation/power supply to consumers in DVC

Price for Civil works in respect of ARC related to construction of 33KV Bay (1 no. Feeder & 1 no. Power Transformer)

Price for Erection works in respect of ARC related to construction of 33KV Bay (1 no. Feeder & 1 no. Power Transformer)

Price for Supply Items in respect of ARC related to construction of 33KV Bay (1 no. Feeder & 1 no. Power Transformer)

Price for Erection including Civil works in respect of ARC related to construction of 33KV line

Price for Supply Items in respect of ARC related to construction of 33KV line

Price for Civil works in respect of ARC related to construction of 132KV line

Price for Erection works (other than Civil works) in respect of ARC related to construction of 132KV line

Price for Supply Items in respect of ARC related to construction of 132KV line

Price for Civil works in respect of ARC related to construction of 220KV line

Price for Erection works (other than Civil works) in respect of ARC related to construction of 220KV line

Price for Supply Items in respect of ARC related to construction of 220KV line

Note : 1. Please read the tender documents carefully before filling the price bid. 2. Please fill up the GREEN coloured fields under this page and Schedules attached. 3. If any deviation is taken in the NIT, bidder may fill-up "Cost of Withdrawl Sheet" in Schedule-D. 4. Bid evaluation will be done only on totality of the quoted price by the bidder but not in isolation of any schedule of price. 5. Bid evaluation will be done in comparisaion with the NIT estimate which is exclusive of GST. 6. GST will be applicable as per GOI rule.

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Schedule-I

Price Schedule for Civil works in respect of ARC related to construction of 33KV Bay (1 no. Feeder & 1 no. Power Transformer)

Name of the Bidder/ Bidding Firm / Company :

Item No.

Clearing grass and removal of the rubbish/gravel upto a distance of 50M outside the periphery of the area cleared.

Levelling and dressing of the ground including filling the depression with sand or moorum as may be required including supply of the materials at site,watering and ramming the fillings whenever required complete:-

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas(exceeding 30cm in depth,1.5m in width as well as 10 sqmm on plan) including disposal of excavated earth, lead upto 50 meter and lift upto 1.5 meter, disposed earth to be leveled and neatly dressed.

Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation, trenchs or drains (not exceeding 1.5 m in width or 10 Sqm on plan), including dressing of sides and rammimg of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Extra over item above(3) &(4) for Exacavation in all kinds of soil & rock:

Filling (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 Mtr. and lift up to 1.5 Mtr.

Providing and laying in position plain cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level

Providing and laying in position specified grade of reinforcement cement concrete excluding the cost of shuttering and reinforcement - All work upto plinth level

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1:2 [1 cement : 1 course sand (zone III) derived from natural sources: 2 graded stone aggregate 20 mm nominal size]

Supplying, straightening, cutting, bending, cranking, hooking, fixing, binding & placing at any position in superstructure,fdn & plinth with MS/Torsteel reinforcement in all works of concrete ,masonary etc. including supply of binding wire with 18 SWG(1.05 mm) galvanised wire twisted tight and /or/welding the splices where necessary as per IS Codes or direction and holding in position with steel rod spacers/chairs/horses etc . complete

Hiring , erecting ,centering,supporting ,sinking, cleaning etc of formwork of apporved design with staging, props and supports for plan & RCC works with all accessories and at all heights including removal of froms as per drawing ,specifications and directions in foundation & plinth

Supplying & providing 25 mm thik.grouting by using ready mix grout like SHRINKKOMP, CONBEXTRA GP2 SIKA GROUT214 or equivalent for miscellaneous base plate, foundation bolt, pipe sleeves, pocket, wholes etc. at all height, locations etc. complete as per drg., specification & direction of Engineer-in-charge.

12 mm cement plaster of mix 1 : 6 (1 cement : 6 coarse sand)

20 mm cement plaster of mix 1 : 6 (1 cement : 6 coarse sand)

Neat cement punning, 1.5 mm thick

Supplying, stacking, spreading and dressing of switchyard area with 75 mm thick, 40 mm (nominal) crushed stone/pebble over a 75 mm thick base layer of cement concrete M10 (1 cement : 3 coarsed sand : 6 greaded stone agregate of 20 mm nominal size) with one layer of cement slurry mix 1:6 (1 cement : 6 fine sand) uniformly laid over cement concrete layer including deweeding, rolling, compacting, watering, dressing etc. complete as per specification and direction of Engineer-in-Charge (Anti weed treatment shall be done and paid seperately).

Antiweed treatment by spraying of chemicals like "ROUNDUP" (Round up manufractured by M/s. MONSANTO INDIA Ltd) or equivalent mixed with water in the proportion 1 liter with 500 liter of water by volume to be spread over the 3333 Sq. Meter of the grass, Shrubs etc. as per direction of Engineer-in-Charge all complete including the cost of chemicals, tools plants etc.

Providing & fixing in position of M.S. / G.I. round holding down foundation bolts with nuts, washers & plates including threading as required etc. complete with minimum two nos. of nuts. 200mm top portion of the bolts are to be galvanized.

Brick work with F.P.S bricks of class designation 75 in foundation & plinth with cement mortar 1: 4.

Brick work with F.P.S bricks of class designation 75 in foundation & plinth with cement mortar 1: 6

Supplying & fixing 500 mm dia CI cover (medium duty) with frame, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg).

Providing & placing in position precast reinforced cement concrete walffe units square or rectangular as per design and shape slab in 1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 10mm nominal size) including flush or deep ruled pointing at joints in cement mortar 1:2( 1 cement: 2 fine sand), curing,making necessary holes of required sizes for carrying through service lines etc. providing steel hooks for lifting etc. form work in precasting, handling,hoisting,centering and erection complete for all floor levels but excluding the cost of reinforcement.

One brick flat soling with bricks of class designation 50 grouted with sand including ramming & dressing bed to proper levels & filling joints with sand etc complete

Providing & laying of 150 mm dia Centrifugally Cast Iron pipe conforming to IS - 1536 including fixing of strainer.

Providing & fixing 20 mm dia plain mild steel & medium tensile steel bar in cable trenchs.

Painting of equipment structure base, cable rack etc with black bitumastic paint of approved brand and manufacture to give an even shade with two or more coats.

Coal tarring two coats on outer wall of CTR tank and other new work using 0.16 Litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively.

Constructing brick masonry manhole of inside size 900x800 mm and 450 mm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5, in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

Extra over item no (27) for additional depth of manhole over initial depth of 0.45 M.

GI pipe (medium class) 150 mm dia with flange (F- Table, BS-10) to be embeded in the inlet of oil chamber (Nitrogen Injection Explosion Prevention and Fire Extinguishing System) (Materials will be supplied by contractor at his own cost)

Dismantling

Demolishing R.C.C work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable materials within 50m leads as per direction of Engineer-in-charge.

Demolishing cement concrete with 1: 3 : 6 or richer mix manually/ by mechanical means including stacking of steel bars and disposal of unserviceable materials within 50m leads as per direction of Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable materials and disposal of unserviceable materials within 50m leads as per direction of Engineer-in-charge–in of DVC.

Dismantling of steel work in built up sections in angles, steel pipes, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50m lead.

For Transportation of rubbish by mechanical transport beyond initial lead upto 1 KM including loading, unloading and stacking and as per direction of Engineer-In-Charge.

Supply (SAIL or other approved brand of DVC), Febrication, Assembling and erecting in position various switchyard structures including supply of Nuts, bolts, washers etc. at site with contractor’s own tools and tackles, crane and labour, including bolted and/or welded connection etc. complete as per drawings, specifications and directions of DVC including one coat of red oxide & two coats of aluminium paint.

Transporting, Assembling and erecting in position various switchyard structures at site with Contractors own tools & tackles, crane & labour including bolted and/ or welded connections etc. complete as per drgs. , spec. ,& directions

Transporting, Assembling and erecting in position various switchyard structures at site with Contractors own tools & tackles, crane & labour including bolted and/ or welded connections etc. application of a coat of red oxide paint( IS: 2074) after erection & two coats of a coat of red oxide paint(IS:2074) after erection & two coats of Al. paint(IS:2339)as finish coat ( manufactured by berger, J&N ,Asian Paints) etc. such that coating thickness shall not be less than 100m (Minimum) complete as per drgs. ,spec.,& directions

Transporting, Assembling and erecting , fitting & fixing in position of MS angle post & struts for fixing chain -link fencing,barbed wire over boundry wall, cable trays and racks, all embedded steel work such as foundation materials,inserts, clamps,stops, bolts,fan hooks etc. in concrete & masonary works & miscellaneous structures etc. complete with a coat of primer complete ar per drgs, spec., & directions.

Transporting, handling , fitting & fixing of standard rails in concrete at various locations like floors, transformer foundation, rail-cum -road as per drgs, spec., & directions of Engineer-in - charge.( Required rails will be supplied free of cost by DVC & other inserts/fixtures etc. as per other item)

TOTAL

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Name of the Bidder/ Bidding Firm / Company :

Schedule-II

Price Schedule for Erection works in respect of ARC related to construction of 33KV Bay (1 no. Feeder & 1 no. Power Transformer)

Item No.

Erection of 33 KV Circuit Breaker complete with all accessoires, structure, connectors including insulator stack

Erection , Testing & Commissioning of 36 KV Isolators without E/s complete with all accessoires structure, connectors including insulator stack

Erection of 33 KV single phase, oil filled, self cooled, hermatically sealed outdoor type CT including fitting of terminal connectors, structure modification as per site condition, if required

Erection of 33 KV Lightening arrester complete with insulating base, surge monitor, leakage current meter etc.

Erection,Testing and Commissioning of 33 KV D/C Feeder Panels

Erection, Testing and Commissioning of post insulator stacks on pipe bus support structure, erection of 1.5" , 2.5" IPS Al. tube (as per direction of Engineer- In-charge) on Insulators and connecting all other equipment of the bay, transformer HV/LV bushing, all required junction boxes, Earthing materials, fitting and fixing of all necessary clamps and connectors including droppers from main bus/transfer bus/ jack bus to CT/ LA/ Pipe Bus etc. with modification works if any as required as per approved drawings & technical specifications for -

Laying, dressing, cleating & clamping of cables including termination of the same at both ends including supply of cleats, clamps, Al tags, glands, ferrules, lugs and all other consumables along trenches, trays including dewatering and cleaning of trenches etc. as required

Erection of 38/66KV, 630 Sq. mm, Al. Conductor, XLPE insulated power Cable (all cores at both ends):

Design, Erection, testing & commissioning of grounding system/ extension of existing grounding system where ever required as per direction of site engineer In-charge comprising of laying of ground mat (with 40mm dia MS rod ) at a level of 600mm (or as per design) below ground level, driving of 3.0M long spike(with 40 mm dia MS Rod) below mat level and laying, dressing and clamping/ welding of riser (with 50 x 6mm GI Flat/ 75 x 12 mm GI Flat) from ground mat to different equipments & structures including welding, bolting, painting of joints etc as required in line with specification and approved drawings.

Design( including drawing deveoplment) of switchyard layout and other switchyard structure and foundation as per requirement for complete 33 KV Transformer Bay

Installation of Meter (OSM)

Total

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Name of the Bidder/ Bidding Firm / Company :

Schedule-III

Price Schedule for Supply Items in respect of ARC related to construction of 33KV Bay (1 no. Feeder & 1 no. Power Transformer)

36 KV Circuit Breakers (3-pole, 1600 Amps. Or Rating of Type Tested Breaker whichever is higher, 31.5 KA for 3 sec, Class M2, Outdoor Vacuum Circuit Breakers)

36KV Isolators (2000 Amps, 170 KVp BIL, Rated short time current of 31.5 KA for 3 sec, Triple pole central post rotating double break, outdoor, mechanically ganged, turn twist type isolators)

36 KV Surge Arrestor 1Ph

36KV Solid Core Post Insulator/Isolator Post Insulator

33KV D/C Feeder Panel (Type - 12 & Type - 13 as per TS)

38KV/66KV, 630Sqmm, Al.Conductor, XLPE insulated power cable (along with trefoil clamps for HV Clamps for HV Cable Complete with nuts & bolts & fixing arrangement) as per specification & approved docs.

Cable termination kit for HV Cable

Straight through Joint Kit for HV Cable

Supplying, fabricating & Galvanising various switchyard structures at site /shop with contractors own tools & tackles, crane & labour complete with bolted and welded connections with GI bolts, nuts and washers etc. complete as per drgs ,specifications & directions (supply of GI bolts, nuts,washers will be paid separately)

Supplying, fabricating MS angle post & struts for fixing chain link fencing/barbed over boundry walls, cable trays and racks, all embedded steel works such as foundations materials,inserts clamps,stops,bolts ,fan hooks etc, inconcrete and masonary works,miscellneous structures etc, complete as per drgs and specification and directions.

Supplying, fabricating holding down/foundation steel bolts including threading as required etc.complete with all necessary nuts plate washers etc.complete. The 200mm top portion of bolt is to be galvanised.

Supply of GI Bolts, Nuts with washers of assorted sizes etc. complete as per drgs ,specifications and directions

Hardware (Insulator string, Conductor, Earth wire , Hardware & Accessories , Al tube , Bus bar Material, Clamp & Connector, Spacer , Assorted Junction Boxes , Power Distribution Boards, Cable tray etc as per directions of EIC) for -

4C x 2.5 Sq mm.

7C X 2.5 Sq mm

12 x 2.5 Sq mm

19C x 2.5 Sq mm.

4C X 6 Sq mm

4C X 10 Sq mm

4C x 10 Sq mm

4C x 16 Sq mm

3.5C x 35 Sq mm

3.5C x 95 Sq mm

Grounding System- Indoor & Outdoor Earthing system for complete substation including Earthing Materials for Earth Mat , risers, GI/GS/AI flats and all associated accessories for grounding of substation as per approved drawing and specification and as per directions of EIC

Total

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Name of the Bidder/ Bidding Firm / Company :

Schedule-I A

Price Schedule for Erection including Civil works in respect of ARC related to construction of 33KV line

SURVEY:

Clearing grass and removal of the rubbish/gravel upto a distance of 50M outside the periphery of the area cleared.

Levelling and dressing of the ground including filling the depression with sand or moorum as may be required including supply of the materials at site,watering and ramming the fillings whenever required complete:-

Check survey as per approved survey chart including Peg marking and preparation of as built route profile.

Detail survey including preliminary survey (plotting on route in toppo sheet), plotting of towers/rail poles in the route profile, preparation and submission of profile drawing, line chart, tower/ rail pole schedule etc.

LINE WORK

FOR RAIL POLE STRUCTURE:

Erection of Rail Pole (105 lb / 120 lb) structure including Pit marking, excavation in all types of soil (including hard rock) upto required level, concreting with 1:2:4 mix cement concrete (over 75 mm. thick PCC of mix 1:3:6), plastering with 1:6 cement mortar and cement punning, fabrication of cross-arm, bracing, clamp including hoisting and fixing in position with packing pieces, spacers, clamps, bolts, nuts etc. and backfilling complete with all respect as per drawing, specification and direction of DVC Engineer & including supply of all materials including fish plate and storing, handling and transportation of materials at work site. (except 105 / 120 lb Rail poles, channels, angles)

xviii

Modification / Strengthening of Rail Pole (90 lb /105 lb / 120 lb) location structure including civil works of rail pole foundation like concreting, plastering, cement punning etc. (as per instruction of the Engineer-in-Charge of DVC) upto required level, extension of rail pole, fabrication of cross-arm, bracing, clamp including hoisting and fixing in position with packing pieces, spacers, clamps, bolts, nuts etc. as per specification and direction of DVC Engineer & including supply of all materials including fish plate and storing, handling and transportation of materials at work site. (except 90/ 105 / 120 lb Rail poles, channels, angles)

xviii

Conversion & Modification of structure including Pit marking, excavation in all types of soil (including hard rock) upto required level, concreting with 1:2:4 mix cement concrete (over 75 mm. thick PCC of mix 1:3:6), plastering with 1:6 cement mortar and cement punning, fabrication of cross-arm, bracing, clamp including hoisting and fixing in position with packing pieces, spacers, clamps, bolts, nuts etc. and backfilling complete with all respect as per drawing, specification and direction of DVC Engineer & including supply of all materials including fish plate and storing, handling and transportation of materials at work site. (except 105 / 120 lb Rail poles, channels, angles)

Erection of Strud Pole structure including Pit marking, excavation in all types of soil (including hard rock) upto required level including concreting, Clamping etc. as per drawing and specification and as per instruction of the Engineer-in-Charge of DVC. (All the clamps and materials except rail poles will be supplied by the contract at his own cost)

Stay fixing including marking of location, excavation in all kinds of soil (including hard rock) upto the required level concreting with 1:2:4 cement concrete mix, backfilling, fabrication of clamps and fixing of stay sets, stay wires complete in all respect as per drawing, specification and direction of Engineer-in-charge including supply of all materials (size of the excavation pit 0.60 meter X 0.60 meter X 1.00 meter)

Fixing of Lightning Mast over 2 Pole/ 4 Pole structure of 33KV D/C Line and connection of GI Earth wire with Lightning Mast and laying, clamping of GI earth wire, fixing of socket at both end of GI wire for proper connection with CI earth plate at earth pit as per specification & direction of In-Charge including cost of consumables.

Direct earthing of lightning mast at required location including excavation, filling of excavated pit with alternate layer of mixture of charcoal & salt, placing of CI plate along with connection with GI earth wire for direct earthing of lightning mast, including watering & ramming etc. as per specification & direction of Engineer-in-Charge.

MS structural work with rolled structural members (e.g. angle, Tee, flat etc.) connected to one another with gusset, cleat, bolt, nut, etc., complete including fabrication, assembling, hoisting, erection of materials, supply of required bolts & nuts for earth wire fixing arrangement in rail poles.

Painting of Rail Pole Structure

Painting of complete Rail pole structure with black anti-corrosive (two coats upto 2'0" from PL), red oxide (two coats), Alluminium paints (two coats above 2'0" from PL to top of Rail) including cleaning of surface and supply of all materials.

Rail pole foot Earthing

Grounding of Tower/Rail pole with

Stringing on Rail Pole Structure

Laying, stringing of 3 (three) nos. DOG Conductors in single circuit including hoisting of the insulator and fixing on the Rail pole structure/Tower, erection of the hardware sets, jointing of conductors, running out and pulling up of conductors and tensioning and clipping-in with the clamps/pin insulator, fixing of vibration dampers and / or preformed armour rods, erection of jumpers at section / angle location and hoisting and fixing of suspension insulator sets or pin insulator, stringing of jumper connection etc.complete in all respect as per specification and direction of Engineer-in-charge including storing, handling and transportation of all materials to site including felling down of trees as per regulation.:

Laying, stringing of 6 (six) nos. DOG Conductors in double circuit including hoisting of the insulator and fixing on the Rail pole structure/Tower, erection of the hardware sets, jointing of conductors, running out and pulling up of conductors and tensioning and clipping-in with the clamps/pin insulator, fixing of vibration dampers and / or preformed armour rods, erection of jumpers at section / angle location and hoisting and fixing of suspension insulator sets or pin insulator, stringing of jumper connection etc.complete in all respect as per specification and direction of Engineer-in-charge including storing, handling and transportation of all materials to site including felling down of trees as per regulation.:

Laying, stringing of 3 (three) nos. conductors like Panther/ Lark etc. in single circuit including hoisting of the insulator and fixing on the Rail pole structure/Tower, erection of the hardware sets, jointing of conductors, running out and pulling up of conductors and tensioning and clipping-in with the clamps/pin insulator, fixing of vibration dampers and / or preformed armour rods, erection of jumpers at section / angle location and hoisting and fixing of suspension insulator sets or pin insulator, stringing of jumper connection etc.complete in all respect as per specification and direction of Engineer-in-charge including storing, handling and transportation of all materials to site including felling down of trees as per regulation.:

Laying, stringing of 6 (six) nos. conductors like Panther/ Lark etc. in double circuit including hoisting of the insulator and fixing on the Rail pole structure/Tower, erection of the hardware sets, jointing of conductors, running out and pulling up of conductors and tensioning and clipping-in with the clamps/pin insulator, fixing of vibration dampers and / or preformed armour rods, erection of jumpers at section / angle location and hoisting and fixing of suspension insulator sets or pin insulator, stringing of jumper connection etc.complete in all respect as per specification and direction of Engineer-in-charge including storing, handling and transportation of all materials to site including felling down of trees as per regulation.:

Stringing and sagging of Earth wire (7/3.15 mm. galvanized steel wire ) including laying, stringing, tensioning, clamping, jointing etc. complete including transportation of all materials to site, Storage & handling per route KM of the line and fixing of hardwares, compression jointing complete in all respect as per direction of engineer-in-charge.:

Fixing of accessories e.g. danger plate, number plate, anticlimbing devices (barbed wire) at 3.0 meter height or as per instruction of the engineer-in-Charge of DVC all around the Rail pole/poles/ towers and painting of circuit no. and location no. on Rail pole structures / tower locations including supply of materials as per drawing, specifications and direction. (Danger Plate, Number Plate, Anticlimbing Device, Phase Plate (set of 3), Circuit Plate, Barbed Wire will be supplied by DVC as per Supply Schedule)

33KV POWER CABLES

Laying of 01 (one) no. of 150 mm dia. HDPE pipe by jack pushing method to cross the railway track including supply of GI pipe of approved brand and all consumables as per direction of Engineer-in-charge.

Laying of 38KV/66KV XLPE 1C x 630 Sq. mm. Aluminium power cable including dressing, cleating, clamping of cable along the excavated earth, cable trench, RCC Hume pipe, metal pipe, structure / rail poles etc. including dewatering & cleaning as required and supplying & providing of cable tags.

Termination of 38KV/66KV 1C X 630 Sq.mm Al. XLPE Powe Cable with outdoor heat shrinkable type cable sealing end termination kits / straight through joints

Tower Structure( Multi Circuit Tower)

Earth work in excavation in foundation trenches, drains etc. including dressing of sides & ramming of bottoms, lift upto 3.0 meter, including pit marking, dewatering, getting out the excavated soil & disposal of surplus excavated soils as directed within a lead of 50 meter complete as per specifications, drawing & instruction of Engineer-in -Charge

Extra over item (24) above for excavation in foundation for every additional lift of 1.5 meter or part thereof over the initial lift of 3.0

Earthwork in filling in excavated pits, trenches, plinth & sides of foundation etc. in layers not exceeding 200 mm in depth, consolidating & dressing each deposited layer by ramming & watering, including cost of supply & carriage of materials etc. complete as per drgs.

Fitting of template (SST) & setting of stub, 4 stubs / tower or fitting of stub through prop setting(stubs & SST to be supplied by DVC free of cost)

Supplying, straightening, cutting, bending, cranking, hooking, fixing, binding & placing at any position in superstructure, fdn., & plinth with MS / Torsteel reinforcements in all works of concrete, masonry etc, including supply of binding wire with 18 SWG (1.05mm) galvanised wire twisted tight and / or welding the splices where necessary as per IS codes or direction and holding in position with steel rod spacer / chairs / horses etc. complete.

Hiring, erecting, centering, supporting, striking, cleaning etc. of formwork of approved design with staging, props and supports for plain & RCC works with all accessories and at all heights including removal of forms as per drawings, specifications & directions.

Charges for shoring & strutting of pits including cost of materials required for this purpose & fixing in position during excavation and/or concreting works as per specifications and directions.

Providing & laying in position Plain cement concrete in foundation & plinth with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including supply of all materials, cost of transport of all materials to site, mixing, laying, vibrating, curing etc. complete but excluding centering & shuttering as per drawings, specification & direction with:

Providing & laying in position Reinforced Cement concrete work in pyramid & chimney of tower foundation & plinth, with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of supply of all materials and cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete & also including erection, supporting, striking out, cleaning etc. of steel muff-boxes, but excluding the cost of reinforcement and muff-boxes / formwork as per drgs., specifications

Providing & laying in position Reinforced Cement concrete work in stepped foundation & plinth, with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of supply of all materials and cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete but excluding the cost of reinforcement and formwork as per drgs.,

Providing & laying in position Reinforced Cement concrete work with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of supply of all materials and cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete but excluding the cost of reinforcement and formwork as per drgs., specifications & directions in superstructure

Transporting, Handling, Assembling & Erecting of tower members (HT & MS ) / structures / gantries / body extensions of all types of tower etc from stores & /or site with contactors' own tools & tackles, crane & labour, including fitting, checking, punching & tack welding of bolts & nuts and / or connections upto bottom cross arm including aluminium painting of tack welded bolt & nuts but excluding fitting & fixing of Number Plates, Danger Plates, Phase Plates, Circuit Plates, Bird Guards, Anti Climbing Devices etc. complete as per drg., specifications & directions (Tower members, gantries, accessories, fasteners etc. are to be supplied by DVC free of cost from DVC stores

Providing, supplying and laying of 20cm thick second class brick pitching (brick on edge over one brick flat pitching) on slopes of embankment canal etc. in 1:4 cement mortar in both layers, curing, preparing base to proper level of slope, with weep holes at a spacing of 1.8 meter horizontally and 0.9 meter vertically or as shown in the drawing complete (with pointing 1:3)

Providing, supplying and laying of rubble pitching (thickness varying from 150mm to 300mm) with stone boulder including hand packing and caulking with cement concrete (1:3:6), 0.15 cu.m. per cum of boulder pitching with 20mm and down stone chips including making weep holes at a spacing of 180 cm. horizontally and 90 cm. vertically including rough dressing of the slope for pitching, packing of the back weep holes etc complete.

Providing, supplying and laying of random rubble pitching with stone boulder of approved quality and size and packed as per direction etc.

GROUNDING OF TOWER

Grounding of Tower with

STRINGING ON MULTI CIRCUIT TOWERS

Laying, stringing of 3 (three) nos. conductors AAAC PANTHER 37/3.15 mm. in single circuit including hoisting of the insulator and fixing on the Rail pole structure/Tower, erection of the hardware sets, jointing of conductors, running out and pulling up of conductors and tensioning and clipping-in with the suspension clamps/pin insulator, fixing of vibration dampers and / or preformed armour rods, erection of jumpers at section / angle location and hoisting and fixing of suspension insulator sets or pin insulator, stringing of jumper connection etc.complete in all respect as per specification and direction of Engineer-in-charge including storing, handling and transportation of all materials to site including felling down of trees as per regulation.: For stringing between tower to tower:

Stringing and sagging of Earth wire (7/3.15 mm. galvanized steel wire ) including laying, stringing, tensioning, clamping, jointing etc. complete including transportation of all materials to site, Storage & handling per route KM of the line and fixing of hardwares, compression jointing complete in all respect as per direction of engineer-in-charge.:

DISMANTLING

Dismantling, taking out, removing, stacking, disposal of unserviceable materials and transportation of salvaged items to any designated DVC stores, including loading / unloading etc. all complete of following substructures and superstructures at all elevations as per direction of Engineer-in-Charge of DVC.

Dismantling of old & 3 nos. of Power conductors (ACSR/AAAC, DOG/ PANTHER/LARK) strung between single circuit tower to rail pole or rail pole to rail pole, including release of suspension/tension hardware assemblies, dismantling of old insulator string, recoiling of old dismantled power conductors and return of all dismantled materials to DVC store at Maithon as per direction of the Engineer-in-charge.

Dismantling of old 6 nos. of Power conductors (ACSR/AAAC DOG/ PANTHER/LARK) including release of suspension/tension hardware assemblies, dismantling of old insulator string, recoiling of old dismantled power conductors and return of all dismantled materials to DVC store at Maithon/Panchet/Kumardhubi as per direction of the Engineer-in-charge.

Dismantling of old Earth wire including release of suspension/tension hardware assemblies, recoiling of old dismantled earth wire and return of all dismantled materials to DVC stores at Maithon or any other specified stores as per direction of the Engineer-in-charge

MISCELLANEOUS

Charges for erection of temporary scaffolding at HT&LT Line/Housing Area/Railway/NH Crossing points as per direction of including supply of all required materials

Erection of cradle guard over P&T line, road crossing and power line crossing etc. including fabrication and fixing of cradle guard cross-arm, 'I' bolt etc. including supply of all materials as required except M.S. channels and angles and including handling and transportation of materials to site as per specification, drawing, regulation and direction of the Engineer-in-charge (Cradle guard wire - 7/14 SWG).

Total

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Name of the Bidder/ Bidding Firm / Company :

Schedule-II A

Price Schedule for Supply Items in respect of ARC related to construction of 33KV line

INSULATOR

33 KV Pin Insulator with pin

70KN Disc Insulator (11KV)

Polymer Pin Insulator with pin suitable for 33 KV line

Polymer Long Rod Disc Insulator suitable for 33 KV line (70 KN)

CONDUCTOR & EARTHWIRE (Optional)

Earth Wire (7/3.15 mm)

AAAC Panther (37/3.15 mm) Conductor

AAAC Panther(37/2.88) conductor

AAAC Dog (19/2.89 mm) Conductor

HARDWARE & CLAMP FOR EARTHWIRE

Tension hardware set for earth wire compression type with complete tension clamp and flexiable copper bond for galvanised standarded steel wire (7/3.15 mm) suitable for rail pole.

Suspension hardware set for earth wire compression type with complete tension clamp and flexiable copper bond for galvanised standarded steel wire (7/3.15 mm) suitable for rail pole.

HARDWARE & CLAMP FOR CONDUCTOR

Double Tension Hardware set for AAAC Panther(37/3.15) conductor suitable for rail pole (Compression Type)

Single Tension Hardware set for AAAC Panther(37/3.15) conductor suitable for rail pole (Compression Type)

Double Tension Hardware set for AAAC Panther(37/2.88) conductor suitable for rail pole (Compression Type)

Single Tension Hardware set for AAAC Panther(37/2.88) conductor suitable for rail pole (Compression Type)

Double Tension Hardware set for AAAC Dog (19/2.89 mm) Conductor suitable for rail pole (Compression Type)

Single Tension Hardware set forAAAC Dog (19 / 2.89 mm) Conductor suitable for rail pole (Compression Type)

Suspension Hardware set for AAAC Panther(37/3.15) conductor suitable for rail pole (Compression Type)

Suspension Hardware set for AAAC Panther(37/2.88 conductor suitable for rail pole (Compression Type)

Suspension Hardware set for AAAC Panther(19/2.89) conductor suitable for rail pole (Compression Type)

Vibration damper for AAAC Dog (19 / 2.89 mm) conductor

Vibration damper for AAAC Panther(37/3.15) conductor

Vibration damper for AAAC Panther(37/2.88) conductor

PG clamp for AAAC Dog (19 / 2.89 mm) conductor

PG clamp for AAAC Panther(37/3.15) conductor

PG clamp for AAAC Panther(37/2.88) conductor

Non Tension joint for AAAC Panther(37/3.15) conductor

Non Tension joint for AAAC Panther(37/2.88) conductor

Non Tension joint for AAAC Dog (19 / 2.89 mm) conductor

Mid Span Compression Joint for AAAC Panther(37/3.15) conductor

Mid Span Compression Joint for AAAC Panther(37/2.88) conductor

Mid Span Compression Joint for AAAC Dog(19/2.89) conductor

Repair Sleeve of AAAC Panther(37/3.15) conductor

Repair Sleeve of AAAC Panther(37/2.88) conductor

Repair Sleeve of AAAC DOG (19/2.89)

Repair Sleeve of Earth Wire (7/3.15mm)

ACCESSORIES

Danger Plate

Number Plate

Phase Plate (set of 3)

Circuit Plate

ANTICLIMBING DEVICE & BARBED WIRE

Barbed Wire

GROUNDING / EARTHING MATERIALS

Pipe type Earthing material for Rail Pole Location / Tower Location as per Drawing & Specification and as per instruction of the Engineer-in-Charge of DVC (Galvanised)

Counter Poise type Earthing material for Rail Pole Location / Tower Location as per Drawing & Specification and as per instruction of the Engineer-in-Charge of DVC (Galvanised)

Lightening mast for 33kV lightning mast for rail pole structure with GI pipe length 10ft. OD-48mm ID-40mm with accessories

RAIL POLE, MS CHANNEL, ANGLE & PLATE

Rail pole of 105 lb per yard / 120 lb per yard (12 m & above length of each rail pole suitable for above works)(Optional)

MS Channel 100x50 mm

MS Angle 65x65x6 mm

MS Angle 75x75x6 mm

MS Angle 50x50x6 mm

MS Angle 100x100x8 mm

8 mm Plate

6 mm Plate

HT XLPE FRLSH POWER CABLE (Optional)

66 KV (E) / 38 KV (UE) 1C X 630 Sq. mm Al XLPE Cable

66 KV (E) / 38 KV (UE) 1C X 400 Sq. mm Al XLPE Cable

Termination kit for 1C X 630 Sq. mm Al XLPE Cable

Straight through joint for 1C X 630 Sq. mm Al XLPE Cable

Termination kit for 1C X 400 Sq. mm Al XLPE Cable

Straight through joint for 1C X 400 Sq. mm Al XLPE Cable

Termination kit for 1C X 240 Sq. mm Al XLPE Cable

Straight through joint for 1C X 240 Sq. mm Al XLPE Cable

Total

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Name of the Bidder/ Bidding Firm / Company :

Schedule-I B

Price Schedule for Civil works in respect of ARC related to construction of 132KV line

Survey

Earth work in excavation in foundation trenches, drains etc. including dressing of sides & ramming of bottoms, lift upto 3.0 meter, including pit marking, dewatering, getting out the excavated soil & disposal of surplus excavated soils as directed within a lead of 50 meter complete as per specifications, drawing & instruction of Engineer-in -Charge

Extra over item (2) above for excavation in foundation for every additional lift of 1.5 meter or part thereof over the initial lift of 3.0

Earthwork in filling in excavated pits, trenches, plinth & sides of foundation etc. in layers not exceeding 200 mm in depth, consolidating & dressing each deposited layer by ramming & watering, including cost of supply & carriage of materials etc. complete as per drgs.

Fitting of template (SST) & setting of stub, 4 stubs / tower or fitting of stub through prop setting (Stubs to be supplied by DVC free of cost):

Supplying, straightening, cutting, bending, cranking, hooking, fixing, binding & placing at any position in superstructure, fdn., & plinth with MS / Torsteel reinforcements in all works of concrete, masonry etc, including supply of binding wire with 18 SWG (1.05mm) galvanised wire twisted tight and / or welding the splices where necessary as per IS codes or direction and holding in position with steel rod spacer / chairs / horses etc. complete.

Hiring, erecting, centering, supporting, striking, cleaning etc. of formwork of approved design with staging, props and supports for plain & RCC works with all accessories and at all heights including removal of forms as per drawings, specifications & directions.

Charges for shoring & strutting of pits including cost of materials required for this purpose & fixing in position during excavation and/or concreting works as per specifications and directions.

Providing & laying in position Plain cement concrete in foundation & plinth with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including supply of all materials, cost of transport of all materials to site, mixing, laying, vibrating, curing etc. complete but excluding centering & shuttering as per drawings, specification & direction with:

Providing & laying in position Reinforced Cement concrete work in pyramid & chimney of tower foundation & plinth, with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of supply of all materials and cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete & also including erection, supporting, striking out, cleaning etc. of steel muff-boxes, but excluding the cost of reinforcement and muff-boxes / formwork as per drgs., specifications

Providing & laying in position Reinforced Cement concrete work in stepped foundation & plinth, with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of supply of all materials and cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete but excluding the cost of reinforcement and formwork as per drgs.,

Providing & laying in position Reinforced Cement concrete work with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of supply of all materials and cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete but excluding the cost of reinforcement and formwork as per drgs., specifications & directions in superstructure

Providing and laying in position ready moixed or site batched design mix cement concrete of M25 grade with minimum cement content of 330Kg/cum for reinforced cement concrete work; using coarse aggregate derived from natural resources, ordinary Portland/Portland slag cement, admixtures in recommmended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of cementing, shuttering, finishing and reinforcement, as per direction of engineer-in-charge; (Note- Extra cement up-to 10% of the minimum specified cement in design mix shall be payable separately. In case the cement conten in design mix is more than 110% of the specified minimum cement content, the contractor shaaall have discretion to either re-design the mix or bear the cost of extra cement.)

Add for using extra cement in the item-13 of design mix over & above the specified cement content there in

Transporting, Handling, Assembling & Erecting of tower members (HT & MS ) / structures / gantries / body extensions of all types of tower etc from stores & /or site with contactors' own tools & tackles, crane & labour, including fitting, checking, punching & tack welding of bolts & nuts and / or connections upto bottom cross arm including aluminium painting of tack welded bolt & nuts but excluding fitting & fixing of Number Plates, Danger Plates, Phase Plates, Circuit Plates, Bird Guards, Anti Climbing Devices etc. complete as per drg., specifications & directions (Tower members, gantries, accessories, fasteners etc. are to be supplied by DVC free of cost from DVC stores

Providing, supplying and laying of 20cm thick second class brick pitching (brick on edge over one brick flat pitching) on slopes of embankment canal etc. in 1:4 cement mortar in both layers, curing, preparing base to proper level of slope, with weep holes at a spacing of 1.8 meter horizontally and 0.9 meter vertically or as shown in the drawing complete (with pointing 1:3)

Providing, supplying and laying of rubble pitching (thickness varying from 150mm to 300mm) with stone boulder including hand packing and caulking with cement concrete (1:3:6), 0.15 cu.m. per cum of boulder pitching with 20mm and down stone chips including making weep holes at a spacing of 180 cm. horizontally and 90 cm. vertically including rough dressing of the slope for pitching, packing of the back

Providing, supplying and laying of random rubble pitching with stone boulder of approved quality and size and packed as per direction etc.

Dismantling, taking out, removing, stacking, disposal of unserviceable materials and transportation of salvaged items to designated DVC stores, including loading / unloading etc. all complete of following substructures and superstructures at all elevations as per direction of Engineer-in-Charge of DVC.

Clearing grass and removal of the rubbish upto a distance of 50 Mtr. outside the periphery of the area closed.

Disposal of building rubbish/malbar/similar unserviceable,dismantled or waste materials by mechanical means ,including loading,transporting, unloading to approved municiple dumping ground or as approved by Engineer-in-charge beyond 50 Mtr. initial lead ,for all leads including all lift involved .

Total (in Rs.):

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Name of the Bidder/ Bidding Firm / Company :

Schedule-II B

Price Schedule for Erection works (other than Civil works) in respect of ARC related to construction of 132KV line

Grounding of Tower with

Stringing and sagging of power conductors including hoisting and fixing of Insulators on the 132KV towers/gantries, erection of hardware sets, running out and laying out of conductors, tensioning and clipping in with clamps, erection of jumpers at the section/angle towers, jointing & repairing of conductors, fixing of vibration dampers, preformed armour rods, bird guards, and including erection of number plates, danger plates, phase plates, circuit plates, step bolts and anticlimbing devices with barbed wire etc on each tower complete in all respect and as per specification & directions including transportation of all materials to the site per route Kilometer of the line.

Dismantling of power conductors (ACSR Lark /AAAC Panther) in one circuit of existing double-circuit transmission line of DVC keeping other circuit in charged condition at the same time including release of all insulators, hardware & accessories without any jerk and damage to the cross arm and if required , recoiling, transportation of all dismmantled conductors & line materials to DVC specified store at Kalyaneswari / Maithon etc. all complete as per direction of DVC's Engineer -in- charge.

Stringing and sagging of 1 (one) no. galvanised stranded steel wire as earth wire (7/3.15 mm) including laying, stringing, tensioning, clamping, jointing etc.complete in all respect including cost of storing, handling, transporting of all materials to site per route Kilometer of the line including fixing of hardwares, vibration damper and/or armour rods etc.

Dismantling of old Earth wire including release of suspension/tension hardware assemblies, recoiling of old dismantled earth wire and return of all dismantled materials to DVC stores at Maithon/Panchet/Kumardhubi or any other specified stores as per direction of the Engineer-in-charge

Stringing of OPGW of 11.9 mm dia and fixing of requisite accessories including transportation of materials to site complete as per specification and directions.

Dismantling/De-stringing of existing OPGW of tower line including release of all hardware & accessories and if required , recoiling, transportation of all dismmantled OPGW & line materials to DVC specified store at Kalyaneswari / Maithon etc. all complete as per direction of DVC's Engineer -in-charge.

OPGW splicing & testing

Providing back stay with steel rope (to be provided by the contractor) to the 220 KV angle tower location & special line crossing tower location as per site requirement & as per direction of the engineer - in - charge of DVC during stringing of power conductors (AAAC ZEBRA 61/3.31mm)

Charges for erection of temporary scaffolding at Railway /HT & LT line/Housing area crossing points as per direction of DVC including supply of all required materials

Total (in Rs.):

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Name of the Bidder/ Bidding Firm / Company :

Schedule-III B

Price Schedule for Supply Items in respect of ARC related to construction of 132KV line

TOWER STRUCTURE MATERIALS (Optional)

Supplying, Fabricating & Galvanising stub & cleat members of various type of tower members / structures etc. including supply of pack washers etc. complete, at shop / site with contractors own tools & tackles, crane & labour complete as per drgs specifications & directions. (supply of G.I. bolts, nuts & spring washers will be paid separately)

Mild Steel as per Grade Designation E250A ( Fe410W)

High Tensile Steel as per Grade Designation E350 ( Fe490)

Supplying, Fabricating & Galvanising various tower members / structures / gantries / extensions etc. including supply of pack washers, Hangers, D-Shackles, Extension links, U-bolts etc. complete, at shop / site with contractors own tools & tackles, crane & labour complete bolted and / or welded connections with G.I. bolts, nuts, washers, etc. complete as per drgs specifications & directions. (supply of G.I. bolts, nuts, step bolts & spring washers will be paid separately )

Supplying & Fabricating Holding down / foundation steel bolts including threading as required etc. complete with all necessary nuts plate washers etc. complete. The 200 mm top portion of bolt is to be galvanised.

G.I. BOLTS & NUTS

Supply of GI Bolts, Nuts (Grade-5.6) with spring washers of assorted sizes for towers including step bolts etc. complete as per drgs., specifications and directions.

Supply of GI Bolts, Nuts (Grade-8.8) with spring washers of assorted sizes for towers including step bolts etc. complete as per drgs., specifications and directions.

CONDUCTOR (Optional)

AAAC Panther (37/3.15 mm) as per specification

EARTH WIRE (Optional)

Earth Wire (7/3.15mm) as per the Specification

HARDWARE FITTING AND CONNECTORS ETC

Single Suspension Hardware set with Armour grip suspension clamp and Preformed Armour rods suitable for AAAC Panther/ACSR Lark and suitable for fixing on 132 KV Tower (failing load 70KN)

Double Suspension Hardware set with Armour grip suspension clamp and Preformed Armour rods suitable for AAAC Panther/ACSR Lark and suitable for fixing on 132 KV Tower (failing load 70KN)

Single Tension Hardware set with compression type tension clamp suitable for AAAC Panther/ACSR Lark and suitable for fixing on 132 KV Tower (failing load 120KN)

Double Tension Hardware set with compression type tension clamp suitable for AAAC Panther/ACSR Lark and suitable for fixing on 132 KV Tower (failing load 120KN)

Pilot Insulator Hardware set complete with suspension clamp suitable for AAAC Panther/ACSR Lark and suitable for fixing on 132 KV Tower (failing load 70KN)

Vibration damper suitable for AAAC Panther/ACSR Lark (37/3.15mm)

Mid span compression joint for AAAC Panther/ACSR Lark (37/3.15mm)

Repair Sleeve suitable for AAAC Panther/ACSR Lark (37/3.15mm)

PG Clamp AAAC Panther/ACSR Lark (37/3.15mm)

Tee connector AAAC Panther/ACSR Lark (37/3.15mm)

Suspension clamp assembly for Earth Wire (7/3.15mm) with flexible copper bond for earthing

Tension clamp assembly with earthing bonds for Earth Wire(7/3.15mm).

Vibration damper for Earth Wire(7/3.15mm).

Mid span compression joint for Earth Wire(7/3.15mm).

Repair Sleeve suitable for Earth Wire(7/3.15mm).

EARTHING MATERIALS

Pipe type Earthing Materials (Galvanised) for 132 KV tower

Counterpoise type Earthing Materials (Galvanised) for 132 KV tower

TOWER ACCESSORIES

Danger Plate

Number Plate

Phase Plate (one set comprises of three)

Circuit Plate (one set comprises of two)

Bird Guard for 132 KV tower

Anticlimbing Device (without barbed wire).

Barbed Wire for Anticlimbing Device

INSULATOR

70 KN Disc Insulator as per the specification

120 KN Disc Insulator as per the Specification

132KV 120KN Composite Long Rod Polymer Insulator(Tension Type) as per specification

132KV 70KN Composite Long Rod Polymer Insulator(Suspension Type) as per specification

Total (in Rs.):

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Name of the Bidder/ Bidding Firm / Company :

Schedule-I C

Price Schedule for Civil works in respect of ARC related to construction of 220KV line

Survey

Earth work in excavation in foundation trenches, drains etc. including dressing of sides & ramming of bottoms, lift upto 3.0 meter, including pit marking, dewatering, getting out the excavated soil & disposal of surplus excavated soils as directed within a lead of 50 meter complete as per specifications, drawing & instruction of Engineer-in -Charge

Extra over item (2) above for excavation in foundation for every additional lift of 1.5 meter or part thereof over the initial lift of 3.0

Earthwork in filling in excavated pits, trenches, plinth & sides of foundation etc. in layers not exceeding 200 mm in depth, consolidating & dressing each deposited layer by ramming & watering, including cost of supply & carriage of materials etc. complete as per drgs.

Fitting of template (SST) & setting of stub, 4 stubs / tower or fitting of stub through prop setting (Stubs to be supplied by DVC free of cost):

Supplying, straightening, cutting, bending, cranking, hooking, fixing, binding & placing at any position in superstructure, fdn., & plinth with MS / Torsteel reinforcements in all works of concrete, masonry etc, including supply of binding wire with 18 SWG (1.05mm) galvanised wire twisted tight and / or welding the splices where necessary as per IS codes or direction and holding in position with steel rod spacer / chairs / horses etc. complete.

Hiring, erecting, centering, supporting, striking, cleaning etc. of formwork of approved design with staging, props and supports for plain & RCC works with all accessories and at all heights including removal of forms as per drawings, specifications & directions.

Charges for shoring & strutting of pits including cost of materials required for this purpose & fixing in position during excavation and/or concreting works as per specifications and directions.

Providing & laying in position Plain cement concrete in foundation & plinth with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including supply of all materials, cost of transport of all materials to site, mixing, laying, vibrating, curing etc. complete but excluding centering & shuttering as per drawings, specification & direction with:

Providing & laying in position Reinforced Cement concrete work in pyramid & chimney of tower foundation & plinth, with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of supply of all materials and cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete & also including erection, supporting, striking out, cleaning etc. of steel muff-boxes, but excluding the cost of reinforcement and muff-boxes / formwork as per drgs., specifications

Providing & laying in position Reinforced Cement concrete work in stepped foundation & plinth, with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of supply of all materials and cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete but excluding the cost of reinforcement and formwork as per drgs.

Providing and laying in position ready moixed or site batched design mix cement concrete of M25 grade with minimum cement content of 330Kg/cum for reinforced cement concrete work; using coarse aggregate derived from natural resources, ordinary Portland/Portland slag cement, admixtures in recommmended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of cementing, shuttering, finishing and reinforcement, as per direction of engineer-in-charge; (Note- Extra cement up-to 10% of the minimum specified cement in design mix shall be payable separately. In case the cement conten in design mix is more than 110% of the specified minimum cement content, the contractor shaaall have discretion to either re-design the mix or bear the cost of extra cement.)

Add for using extra cement in the item-12 of design mix over & above the specified cement content there in

Providing & laying in position Reinforced Cement concrete work with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of supply of all materials and cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete but excluding the cost of reinforcement and formwork as per drgs., specifications & directions in superstructure

Transporting, Handling, Assembling & Erecting of tower members (HT & MS ) / structures / gantries / body extensions of all types of tower etc from stores & /or site with contactors' own tools & tackles, crane & labour, including fitting, checking, punching & tack welding of bolts & nuts and / or connections upto bottom cross arm including aluminium painting of tack welded bolt & nuts but excluding fitting & fixing of Number Plates, Danger Plates, Phase Plates, Circuit Plates, Bird Guards, Anti Climbing Devices etc. complete as per drg., specifications & directions.

Providing, supplying and laying of 20cm thick second class brick pitching (brick on edge over one brick flat pitching) on slopes of embankment canal etc. in 1:4 cement mortar in both layers, curing, preparing base to proper level of slope, with weep holes at a spacing of 1.8 meter horizontally and 0.9 meter vertically or as shown in the drawing complete (with pointing 1:3)

Providing, supplying and laying of rubble pitching (thickness varying from 150mm to 300mm) with stone boulder including hand packing and caulking with cement concrete (1:3:6), 0.15 cu.m. per cum of boulder pitching with 20mm and down stone chips including making weep holes at a spacing of 180 cm. horizontally and 90 cm. vertically including rough dressing of the slope for pitching, packing of the back weep holes etc complete.

Providing, supplying and laying of random rubble pitching with stone boulder of approved quality and size and packed as per direction etc.

Dismantling, taking out, removing, stacking, disposal of unserviceable materials and transportation of salvaged items to designated DVC stores, including loading / unloading etc. all complete of following substructures and superstructures at all elevations as per direction of Engineer-in-Charge of DVC.

Clearing grass and removal of the rubbish upto a distance of 50 Mtr. outside the periphery of the area closed.

Disposal of building rubbish/malbar/similar unserviceable,dismantled or waste materials by mechanical means ,including loading,transporting, unloading to approved municiple dumping ground or as approved by Engineer-in-charge beyond 50 Mtr. initial lead ,for all leads including all lift involved .

Total (in Rs.)

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Name of the Bidder/ Bidding Firm / Company :

Schedule-II C

Price Schedule for Erection works (other than Civil works) in respect of ARC related to construction of 220KV line

Grounding of Tower with

Stringing and sagging of power conductors including hoisting and fixing of Insulators on the 220 KV Towers/ Mutli Ckt. tower/gantries, erection of hardware sets, running out and laying out of conductors, tensioning and clipping in with clamps, erection of jumpers at the section/angle towers, jointing & repairing of conductors, fixing of vibration dampers, preformed armour rods, bird guards, and including erection of number plates, danger plates, phase plates, circuit plates, step bolts and anticlimbing devices with barbed wire etc on each tower complete in all respect and as per specification & directions including transportation of all materials to the site per route Kilometer of the line.

Dismantling of 6 (six) nos. old power conductors (ACSR/ AAAC ZEBRA) of existing double-circuit transmission line of DVC including release of all insulators, hardware & accessories without any jerk and damage to the cross arm and if required , recoiling, transportation of all dismmantled conductors & line materials to DVC specified store etc. all complete as per specification & direction of DVC's Engineer -in- charge.

Dismantling of 3 (Three) nos. power conductors (ACSR/ AAAC ZEBRA) of existing double-circuit transmission line of DVC keeping other circuit in charged condition at the same time including release of all insulators, hardware & accessories without any jerk and damage to the cross arm and if required , recoiling, transportation of all dismmantled conductors & line materials to DVC specified store etc. all complete as per specification & direction of DVC's Engineer -in- charge.

Stringing and sagging of 1 (one) no. galvanised stranded steel wire as earth wire (7/3.15 mm) including laying, stringing, tensioning, clamping, jointing etc.complete in all respect including cost of storing, handling, transporting of all materials to site per route Kilometer of the line including fixing of hardwares, vibration damper and/or armour rods etc.

Dismantling of old Earth wire including release of suspension/tension hardware assemblies, recoiling of old dismantled earth wire and return of all dismantled materials to DVC stores at Maithon/Panchet/Kumardhubi or any other specified stores as per direction of the Engineer-in-charge

Stringing of OPGW of 11.9 mm dia and fixing of requisite accessories including transportation of materials to site complete as per specification and directions.

Dismantling/De-stringing of existing OPGW of tower line including release of all hardware & accessories and if required , recoiling, transportation of all dismmantled OPGW & line materials to DVC specified store at Kalyaneswari / Maithon etc. all complete as per direction of DVC's Engineer -in-charge.

OPGW splicing & testing

Charges for erection of temporary scaffolding at Railway /HT & LT line/Housing area crossing points as per direction of DVC including supply of all required materials

Service charges to get the following proposal cleared as mentioned in specification(For 33KV to 220KV line).

Total (in Rs.)

NIT No: DVC/Tender/Head Quarter/SPE/CMM/Supply/78151 dated 12.01.2026

Name of the Bidder/ Bidding Firm / Company :

Schedule-III C

Price Schedule for Supply Items in respect of ARC related to construction of 220KV line

TOWER STRUCTURE MATERIALS (Optional)

Supplying, Fabricating & Galvanising stub & cleat members of various type of tower members / structures etc. including supply of pack washers etc. complete, at shop / site with contractors own tools & tackles, crane & labour complete as per drgs specifications & directions. (supply of G.I. bolts, nuts & spring washers will be paid separately)

Mild Steel as per Grade Designation E250A ( Fe410W)

High Tensile Steel as per Grade Designation E350 ( Fe490)

Supplying, Fabricating & Galvanising various tower members / structures / gantries / extensions etc. including supply of pack washers, Hangers, D-Shackles, Extension links, U-bolts etc. complete, at shop / site with contractors own tools & tackles, crane & labour complete bolted and / or welded connections with G.I. bolts, nuts, washers, etc. complete as per drgs specifications & directions. (supply of G.I. bolts, nuts, step bolts & spring washers will be paid separately )

Supplying & Fabricating Holding down / foundation steel bolts including threading as required etc. complete with all necessary nuts plate washers etc. complete. The 200 mm top portion of bolt is to be galvanised.

G.I. BOLTS & NUTS

Supply of GI Bolts, Nuts (Grade-5.6) with spring washers of assorted sizes for towers including step bolts etc. complete as per drgs., specifications and directions.

Supply of GI Bolts, Nuts (Grade-8.8) with spring washers of assorted sizes for towers including step bolts etc.complete as per drgs., specifications and directions.

CONDUCTOR(Optional)

AAAC Zebra (61/3.31 mm) as per specification

EARTH WIRE

Earth Wire (7/3.15mm) as per the Specification

HARDWARE FITTING AND CONNECTORS ETC

Single Suspension Hardware set with Armour grip suspension clamp and Preformed Armour rods suitable for AAAC Zebra/ACSR Zebra/ACSR Deer and suitable for fixing on 220 KV Tower (failing load 70KN)

Double Suspension Hardware set with Armour grip suspension clamp and Preformed Armour rods suitable for AAAC Zebra/ACSR Zebra/ACSR Deer and suitable for fixing on 220 KV Tower (failing load 70KN)

Single Tension Hardware set with compression type tension clamp suitable for AAAC Zebra/ACSR Zebra/ACSR Deer and suitable for fixing on 220 KV Tower (failing load 160KN)

Double Tension Hardware set with compression type tension clamp suitable for AAAC Zebra/ACSR Zebra/ACSR Deer and suitable for fixing on 220 KV Tower (failing load 160KN)

Pilot Insulator Hardware set complete with suspension clamp suitable for AAAC Zebra/ACSR Zebra/ACSR Deer and suitable for fixing on 220 KV Tower (failing load 70KN)

Vibration damper suitable for AAAC Zebra (61/3.31mm)

Mid span compression joint for AAAC Zebra (61/3.31 mm)

Repair Sleeve suitable for AAAC Zebra (61/3.31 mm)

PG Clamp (ACSR Zebra/ACSR Deer to AAA Zebra Conductor)

Tee connector (ACSR Zebra/ACSR Deer to AAA Zebra Conductor)

Suspension clamp assembly for Earth Wire (7/3.15mm) with flexible copper bond for earthing

Tension clamp assembly with earthing bonds for Earth Wire(7/3.15mm).

Vibration damper for Earth Wire(7/3.15mm).

Mid span compression joint for Earth Wire(7/3.15mm).

Repair Sleeve suitable for Earth Wire(7/3.15mm).

EARTHING MATERIALS

Pipe type Earthing Materials (Galvanised) for 220 KV tower

Counterpoise type Earthing Materials (Galvanised) for 220 KV tower

TOWER ACCESSORIES

Danger Plate

Number Plate

Phase Plate (one set comprises of three)

Circuit Plate (one set comprises of two)

Bird Guard for 220 KV tower

Anticlimbing Device (without barbed wire).

Barbed Wire for Anticlimbing Device

INSULATOR

70 KN Disc Insulator as per the specification

160 KN Disc Insulator as per the Specification

220KV 160KN Composite Long Rod Polymer Insulator(Tension Type)

220KV 70KN Composite Long Rod Polymer Insulator(Suspension Type)

Total (in Rs.):