173/EDC(H)/2023-24

Amount

Safe loading Carriage & unloading of following material from store centre to pit site/JE dump store.

Top Channel with clamp (125×65×2240)mm

Dropper Channel with clamp (100×50×2028)mm

T-Off Channel With Clamp

Sub Station base angle (75×75×6×2028)mm

250 KVA T/F

400 KVA T/F

PCC Pole 8.5 Mtr. Long

ST Pole 11 Mtr. Long

11 KV XLPE 3X185 SQMM

G.I. Wire 6 SWG

11 KV Fuse Set

Stay Set Complete

Earthing Complete

ACSR Weasel Conductor

Disc. Insulator with fitting

11 KV Pin Insulator with G.I. Pin

11 KV VCB 600/300/5A, 350MVA I/C

11 KV VCB 400/200/5A, 350MVA 0/C

Battery Set 24 Volt with Charger

T/F OIL

X-Arm MS Angle 65x65x6 mm V-Type

F-Bracket for 8.5mtr PCC Pole/ 11 mtr STP

holding clamp for x-arm

Erection of PCC Pole 8.5 meter long single pole with grouting & with fixing all accessories.(like cross arms,holding clamp,pin insulator,disk insulator, nut & bolts) holding clamps and nut bolts will be provided by contractor only.

Errection of PCC Pole 8.5 meter long double pole with grouting & with all accessories.(11 kv disk insulator,top channel,pin insulator) (and nut bolts,holding clamps which will be provided by contractor only)

Errection of STP Pole 11or 13 meter long single pole with grouting & with all fixing necessory accessories.(like cross arms,holding clamp,pin insulator,disk insulator, nut & bolts) holding clamps and nut bolts will be provided by contractor only.

Errection of STP Pole 11 or 13 meter long double pole for cable hoisting or overhead road crossing with grouting & fixing all necessory accessories( holding clamp & nut bolts for cable, top chanel cable holding angle, gi pipe of 6 m long for aforesaid cable i.e.3x185 sq mm cable etc will be provided by contractor only).

11 kv XLPE 3x185 sq mm cable Laying work( in preformed trench depending upon the site conditon necessary change) in swichyard and control room

11 kv XLPE 3x185 sq mm cable Laying work( in hume pipe of 125 mm dia) for swichyard or control room

11 kv XLPE 3x185 sq mm cable Laying work in trench by trench formation for proposed way of cable of size of 750x900 mm for swichyard or control room

Ordinary earthing by 11 KV MS earth Rod 2500 mm long as per RESPO schedule. All material except earthing rod shall be supplied by the contractor.

Grouting and Nozzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (sand, brick blast & cement). All material except stay wire shall be supplied by the contractor.

Stringing & Sagging of three phase 11 kv ACSR weasel Conductor as per respo norm(nut n botls have to arrange by contractor only on no extra payment)

Placement of 11/0.4 KV T/Fs from dump place(departmental store hardoi ) to newly constructed T/Fs plinth & installation, commissioning of 250 KVA T/Fs of T/F Plinth and including jumpering with the system ( All the required martial for above job shall be provided by contractor except T/Fs) as per respo norms

Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation, commissioning of 400 KVA T/Fs of T/F Plinth and including jumpering with the system ( All the required martial for above job shall be provided by contractor except T/Fs) as per respo norms

Looping & chopping of tree branches for clearance of HT/LT line after clearance of line throughout pieces of tree branches of site(after taking noc from concerned department as per need n rules and regulations by contractor one self only.

Installation and Fixing of 11kv Fuse Set (all Material arranged by the contractor except fuse set )

Installation,Fixing of 11 kv I/C VCB Pannel CTR 600/300/5A( rating may vary as per availability of material) (all Materail like control Cable , HT Tape,Lugs wiring and other asrequired arranged by the contractor except VCB Pannel

Installation, Fixing of 11 kv O/G VCB Pannel CTR 200/100/5A (rating may vary depending upon the material availability (all Materail like control Cable , HT Tape,t&p ,Lugs wiring and other as required arranged by the contractor except VCB Pannel

SUPPLY OF MOBILE TROLLY suitable FOR 250 or 400 KVA T/F as per standard norms like respo norms or other as applicable as per customary of department in present trend

Installation of Battery Set 24 Volt with charger alongwith installation of switch board,wiring work( wiring material and switch board containing MCB for 15 A) suitabe for 15 Aprovided by contractor) suitable for both equipment with all fixing accessories required for making connection.

loading,carriage unloading of fresh T/f oil from departmental store hardoi or workshop Hardoi, to corresponding sub station under edd shahabad.

Collecton cum Carriage of Scrap generated Material from working site to store hardoi or via corresponding sub station to hardoi store(damaged weasel conductor or old and used condr or damaged abc cable or old & used cable, GI related materials)

Dismantling of old used (Existing) material and loading, Carriage & unloading from site to JE Dump store/store centre, Hardoi,As per decision of competent authority on legal terms and use

Dismantling of VCB Panel, Scrap material conductor and other materials

M/S NICE ASSOCIATES