CA NO CWE/CHM-33/2021-22 SPL REPAIR TO CHAJJA BALCONY SUNKEN FLOORING ROOF LEAKAGE AND EXTERNAL SURFACE FINISHING IN TYPE-I QTRS OF DEF CIV MD ACCN (412 TO 423) AND 385 TO 399 (27QTRS)) AT CHANDIMANDI

Amount

Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Demolition of mud in roof, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-0 (using 12.5m graded crushed stone aggregate) average 50mm thick , as in roof padding, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. Note. water proofing compound to be measured and paid separately.

M & L for Preparation and cleaning surfaces of conc rate incl flashing and junction of parapets etc and applying APP based polymeric memberane min wt 3 kg/Sqm and min 3 mm thick reinforced with non woven fabric with torch application over and including a coat of oil base bituminous primer complete all as specified and as directed.

M & L for plain Cement concrete tiles 25cm x 25cm x 22mm thick, (m a c h i n e pressed) with grey cement and no pigment set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15mm thick bedding layer in CM 1:4 complete all as specified and directed.

M & L for preparation and cleaning surfaces of conc rate incl flashing and junction of parapets etc and applying APP based polymeric memberane min wt 3 kg/sqm and min 3 mm thick reinforced with non woven fabric with torch application over and including a coat of oil base bituminous primer and finally applying two coats of bitumenous aluminum paint over APP membrane incl taking down old existing treatment complete all as specified and directed.

Dismantling floor hearths or wall tilling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Material and labour for glazed coloured ceramic tiles of Size(300mmx450mm)x7mm thick as on vertical surfaces of walls, set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 20 mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles, complete all as specified and as directed.

M&L in repair for 16-18mm thick granite slab (of any type) work (table rubbed and polished) in plateform,urinal portition and the like over and including 15mm thick bedding layer in CM 1:6 including pointing in white cement 1:2 using marble dust and admixture of pigment to match the shade of granite including circular cutting or notching for fixing WHB counter and rounding edge complete all as specified and directed.

M & L for water proofing treatment to Sunken portion and adjoining walls of kitchen, WC, Bath & toilet etc shall be provided on sunken portion as per following:- (a) 15 mm thick plaster in cement mortar (1:3) after roughening and cleaning the surface mixed with WP compound as per manufacturer's instruction. (b) Apply cement slurry to the surface @ 0.488 kg/Sqm of cement mixed with Acrylic based polymer modified cementious compound @ 0.253 kg /sqm and the surface will be allowed to air cure for 4 hrs. (Make : FOSROC/Dr. fixit) or other approved equivalent brand specified in Appx 'B'. (b) Apply another layer of cement slurry @ 0.242 kg/Sqm of cement mixed with acrylic based polymer modified cementious composit compound @ 0.126 kg /sqm and the surface will be allowed to the air cure for 4 hrs. (c) curing of sunken portion with water minimum for 48 hrs by ponding. (d) Paste one layer of 3 mm thick APP membrane over a coat of bitumen primer by torch application to treated sunken surface. (e) Joints /Traps/WC/soil pipes shall be properly sealed with approved sealing compound. (f) Testing of all traps & joints shall be done after sealing and before filling of sunken portions.

S&F as in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests, P or S trap and flush pipe,(excluding flushing cistern) complete all as as specified and directed.

S & F in repairs Wash down water closet (Pedestal pattern), (white) complete including PVC seat cover, PVC bend pipe of 32 mm dia bore and CP jet complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level 10 Ltrs capacity, white, with inlet, ball valve, float and handle including brackets & connection to pipes including PVC connection & 32 mm dia PVC long bend for squat pattern etc set with concrete & making good to floor complete all as specified and directed.

M&L Brick work with sub class 'B' Bricks of class designation 10, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 including dismentling of old brick work complete all as specified and directed.

M & L for taking down cement or cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

Demolition of cement concrete in ground floors and paving n. exe 15 cm thick (below or above ground level) complete all as specified and directed.

M & L for 50 mm thick PCC type B-1 (1:3:6) using 20mm graded stone aggregate as in plinth protection finishing the top layer even and smooth without using extra cement with and including filling the joints with mastic filling complete all as specified and directed.

M & L cement conc 1:2:4 Type B-1, 20 mm graded stone aggregate as in roof kerbs and the like rounded or chamfered edges complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

M & L for Reinforced Cement Concrete 1:2:4 type B1 using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, water tanks and in shelves and the like with and including demolitions of old RCC complete all as specified.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M & L for mild steel round deformed bars 6mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingimild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M & L for formwork to soffits of suspended slabs such as lintel, roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified.

M & L for Machine cut kota stone slab flooring 18-20 mm thick over and including 20 mm thick cement screed base(1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M & L for Machine cut kota stone slab flooring 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including 15 mm thick cement rendering (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M & L for pre polished Machine cut kota stone slab single piece as in steps and risers, 18-20 mm thick laid over and including 15 mm thick cement rendering (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified & directed.

S&F in repair 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including ball brass valve high pressure with polythene float & flynut 15 mm dia and brass gate valve all as specified in SSR Part-I complete all as specified and directed.

S & F in repair 75mm bore (sand cast) cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches/ floors or fixed to wall complete all as specified and directed.

S & F in repair 100mm bore (sand cast) cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches/ floors or fixed to wall complete all as specified and directed.

M & L in repair for 75mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

M & L in repair for 100 mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

S & F in repair Bib taps fancy type cast copper alloy chromium plated screwed down screwed for iron pipe, 15mm bore, complete all as specified and directed.

S&F in repair 15mm bore Stop valves cast copper alloy screwed down high pre-ssure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed restop valves cast copper alloy screwed down high pre-ssure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing Vitreous China wash basin, angle back, size 400 x400 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets and 32 mm dia CP waste coupling and 32mm dia PVC waste pipe etc fixed as in repair complete all as specified and directed.

S & F for 15mm bore pillar tap fancy type, cast copper alloy chromium plated screwed down, high pressure with crutch or butterfly handle fixed in repair complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified & directed.

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed.

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified complete all as specified.

M & L for Rendering 10 mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces incl finishing surface even and smooth without using extra cement complete all as specified and as directed.

M & L for Rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces incl finishing surface even and fair without using extra cement complete all as specified and as directed.

M&L for two coats of distemper oil emulsion incl preparation of new/ undecorated surfaces over and including a coat of 2-3mm thick wall care putty on walls complete all as specified & directed.

M&L for two coats of distemper oil emulsion incl preparation of old undecorated surfaces walls complete all as specified & directed.

Preparation of new external surfaces of wall & applying two coats of cement based paint complete all as specified and directed.

Preparation of old surfaces of walls & applying two coats of cement based paint complete all as specified and directed.

Taking down chowkats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4.00 sqm m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs complete all as specified.

Supply and fixing factory made steel windows (Box type) w/o glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays hold fast,FI 12X3 mm for securing wire gauge etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs complete all as specified.

S&F steel windows fixed type with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded fixed as in repairs complete all as specified and directed.

S & F of 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty or with wooden beading in squares n.exc. 0.5 Sqm in each panes complete all as specified and directed.

S & F of 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fix stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and as directed.

S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides but with particle board core complete all as specified and directed.

S & F Solid PVC frame (Single Rebated) of size 75mm x 45mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin complete all as specified & directed by Engr-in-Charge. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelaminated PVC Sheet on back face, With Wood free EPS, supplying & fixing in frame at site as per specification complete all as specified & directed by engineer-in-charge.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section tower bolt complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) complete all as specified and directed.

S&F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate fixed as in repair including taking down the unserviceable including fixing to steel frame by welding or rivets complete all as directed.

Supply and fixing for butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply & Fixing 150mm size aluminium handles cast type anodised complete all as specified and directed.

M&L for floor door stopper of aluminium alloy body 150m long and tongue, anodised with hard drawn steel spring fixed to doorshutters including taking out the existing complete all as specified and directed.

S & F for 18 mm thick solid PVC boarding, white, fixed in cupboards, shelves, drawer and partition etc. fixed with CP brass or steel screw of suitable size incl taking down existing wooden boarding complete all as specified and directed.

M&L for piano hinges mild steel bright finish width of flap 40mm when opened fixed in repairs including taking out the existing complete all as specified and directed.

Supply and fixing PVC body magnetic catchers for use in cup boards of kitchen, ward robes, complete all as specified. Make Universal/ Everest/Sandhu or equivalent as approved by GE.

Supply & Fixing 100 mm size aluminium handles cast type anodised complete all as specified and directed.

S & F of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe.290.Gde-E-165 complete all as specified.

Supply and fixing of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and Labour for MS Fe-410- W(Gde- E-250) quality- B Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified.

M&L for two coats synthetic enamelled paint incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated sheets) in roof coverings complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks complete all as specified and directed.

S & F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chimney covering/flushing fixed with self tapping screws complete all as specified and directed.

S & F CI 75mm bore of pipe branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed in repair complete all as specifed and as directed.

S&F CI bends (any radius) diminishing pieces or tapers (larger bore measured) for pipes of bore 100 mm, fixed in repair complete all as specifed and as directed.

S&F CI bends (any radius) diminishing pieces or tapers (larger bore measured) for pipes of bore 75 mm, fixed in repair complete all as specifed and as directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed

Material and labour for pre polished Chequered cement concrete tiles with grey cement and coloured pigment, 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified & directed.

M & L for Coloured machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade (with graey cement & no pigment) over and including 25 mm thick sand cushioning complete all as specified and as directed .

M&L for 40 mm thick cement concrete 1:3:6 type B, PCC type B-1 (1:2:4) using 20mm graded stone aggregate as in floor protection including brooming/spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green (chequered finish) with and including dividing the panels in squares n.exc 2m each side and filled the same with mastic filling complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:3:6 type B, PCC type B-1 (1:2:4) using 20mm graded stone aggregate as in plinth protection finishing the top surface even and smooth without using extra cement with and including fillings the joints with mastic filling complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm aggreage as in sub base to floors complete all as specified and as directed.

M&L PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L taking down, chipping and removing the loose spailt, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforced cement concrete, wire brushing and cleaning the exposed steel reinforced bar, apply rust remover over the cleaned re-bar surface, wash with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforced for strenghten the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40 mm average thickness in two coats, with and including polymer @ 10 % by weight of cement including erecting and dismantling steel scafolding for carrying out the work upto height of 10 m (approx.) complete all as specified and as directed. Note: (New reinforcement and MS Section will be measured and paid separately). Make : Dr fixit/sunanda/chemestik/fosrock or equivalent make specified in Appx 'B'.

S & F welded steel wire febric cut to length, fixed to steel members/reinforcement steel, weight per sqm n.exc 4 Kg complete all as specified and directed.

M&L for Mild steel curtain rod, powder coated, ornamental type of dia 25 mm dia and wall thickness not less than 0.80mm including taking out the existing unserviceable complete all as specified and directed.

M & L for MS, powder coated, fancy type wall to wall or corner brackets for 25 mm rods including taking out the existing complete all as specified & directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints as in repair fixed to walls or laid in trenches complete all as specified and directed.

S/F PVC (SWR) bend 110 mm bore as in repair fixed to walls complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, etc and making good to disturbed surfaces of walls, floors etc and match the existing surface complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed FRLSH 1100 volts grade single core muti stranded copper conductor cables of size 1.5 sqmm for phase & neutral in and including concealed PVC conduits, sheet steel sunken boxes1.2mm thickness covered inculding with 3mm thick plastic laminated sheet for mounting switches, sockets, regulator etc and including 1.5 Sqmm copper conductor PVC insulated and unsheathed multi stranded green cable as earth wire for one light point/fan point / buzzer point controlled by one switch complete all as specified and directed. (unit rate quoted including cutting chases wall/floor/pcc and making good the disturbed surface to match with the original. Nothing extra shall be paid on this account)

M&L for point wiring with PVC insulated unsheathed FRLSH 1100 volts grade single core muti stranded copper conductor cables of size 1.5 sqmm for phase & neutral in and including concealed PVC conduits, sheet steel sunken boxes1.2mm thickness covered inculding with 3mm thick plastic laminated sheet for mounting switches, scockets, regulator etc and including 1.5 Sqmm copper conductor PVC insulated and unsheathed multi stranded green cable as earth wire for one light point controlled by two two way switch complete all as specified and directed. (unit rate quoted including cutting chases wall/floor/pcc and making good the disturbed surface to match with the original. Nothing extra shall be paid on this account)

All as per item No 97 here-in-before but for one socket outlet 3pin, 5 Amps on the same board.

All as per item No 97 here-in-before but for one socket outlet 3pin, 5 Amps on the independent board.

All as per item No 97 here-in-before but for one socket outlet 3 pin 15 Amps on independent board using cable of size 2.5 Sqmm for phase & neutral and 2.5 Sqmm as earth wire.

S & F switch piano flush type, single pole, 230 volt one way, 5 Amps complete all as specified and directed.

S & F switch piano flush type, single pole, 230 volt two way, 5 Amps all as specified and directed.

S & F switch piano flush type, single pole, 230 volt one way, 15 Amps all as specified and directed.

S & F Socket out let 2 in 1, 3 pin 5 Amps, ISI marked, 230 Volts complete all as specified and directed.

S & F Socket out let 2 in 1, 5/15 Amps, ISI marked, 230 Volts complete all as specified and directed.

S & F electric bell, AC 230 volt single pole Ding Dong type complete all as specified and directed.

S & F bell push, AC 230 volt pino type one way complete all as specified and directed.

S & F electronic fan regulator 240 volts complete all as specified and directed.

S & F Ceiling rose 6 Amps three terminals complete all as specified and directed.

Taking down ceiling/exshaust fan care fully and refixing of same complete all as specified and directed.

S & F LED CRCA batten with decorative end cap complete with and incl retrofit polycarbonate/glass tube 20 watt capacity 4 feet long & white light and incl connections from ceiling rose complete all as specified and directed.

S & F LED CRCA batten with decorative end cap complete with and incl retrofit polycarbonate/glass tube 10 watt capacity 2 feet long & white light and incl connections from ceiling rose complete all as specified and directed.

S & F LED lamp 9watt capacity complete all as directed.

S & F LED down light round (economy range) (6500/3000K) SSK-SDC-30W-N of capacity 30W with metal ring complete all as specified and directed.

S & F Bulk head fitting made with injection molded polycarbonate material and with UV stabilizer opal acrylic diffuser for glare-free lighting IP-65 degree of protection and with impact resistance of IK-08 complete all as specified and directed.

Disconnecting the power supply and taking down old unserviceable DBs/junction box/panels ect of any type and size complete along with all MCCBs/MCBs etc complete all as specified and directed.

S & F for MCB distribution board having IP-43 protection, powder coated, double door flush mounted complete with locking arrangement suitable for 4 way VTPN 415V AC supply complete all as specified and as directed.

S & F for MCCB 415 volts Triple pole and neutral with fixed thrrmal magnetic setting breaking capacity 16 KA conformingto IS : 13947-2 of 100 Amps with proper thimble complete all as specified and directed.

S & F MCB SP 63 Amps 240 Volts having braking capacity 16 KA "C" characterstic complete all as specified and directed.

Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way complete all as specified and directed.

S & F MCB SPN 40 Amps 240 Volts having braking capacity 10 KA "C" characterstic complete all as specified and directed.

S & F MCB SP 6 to 32 Amps 240 Volts having braking capacity 10 KA "C" characterstic complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit etc., removing materials and making good disturbed surfaces of wall, floors, etc. complete all as specified.

M&L for Sub main wiring (with approved colour coding as per IS) with two single core 6 sqmm FRLSH PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs of main cable) alongwith one run of single core 6 sqmm FRLSH PVC insulated flexible stranded copper donductor 1.1 KV grade of earth for earthing. Notes: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii) Color code shall be Red for phase, black for neutral and green for earth. (iii) For payment purposes, total runs of main cable as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 running meter".

M & L Material & labour for earthing complete with galvanized steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm bore connected to main earth wire on pole light grade 15mm bore connected to main earth wire on poleor control board or main switch and GI pipe medium grade 20mm bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:2:4 type B-1 20 mm graded stone aggregate excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point indicaed including testing on completion all specified & as directed. Note:The unit rate including for protection pipe and GI earth wire 4.00 mm dia from top to earth plate up to 7.5 meter.

S & F sheet metal enclosure of size of 900x600x250mm made of 3.15 thick MS sheet with and including two coats of synthic enamel paint over a coat of red oxide with locking arrangement flush to wall for fixing of 04 Nos energy meter including taking down carefully energy meter including connection complete all as specified and directed.

Supply & fixing of 20/25 mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified.

Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces of wall after concealing the conduit in wall all as specified.

M&L for two coats synthetic enamelled paint over a coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed.

S&F 300mm sweep exhaust fan metal body including blades fixed with nut and bolts with and including cutting holes/opening for fixing exhaust fan and making good the disturbed surface in CM 1:4 complete all as specified and directed.

M/s Om parkash