REPAIR TO PLUMBING, SANITARY FITTINGS, PLASTERING AND CONNECTED MISC BR WORK AT AICTS, NGM, OGM, FAFA UNDER AGE BR-I OF GE SOUTH PUNE

Amount

M&L for removal of air lock / blockage of water in GI tubing 15mm bore of any type including taking down (if required), cleaning the pipe or fittings etc and re-fixing the same in position complete all as directed by Engr-in-charge Note:- Removing 01 air lock / blockage from pipe line and make it functional shall be measured as one Job.

M&L for removal of air lock / blockage of water in GI tubing 20mm bore of any type including taking down (if required), cleaning the pipe or fittings etc and re-fixing the same in position complete all as directed by Engr-in-charge Note:- Removing 01 air lock / blockage from pipe line and make it functional shall be measured as one Job.

Supplying, fixing, jointing and testing galvanised steel tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking up or down of old steel water tubing and connections including cleaning for refixing or remove from site, complete all as specified and directed for following size of pipes :- (a). 15mm bore

(b) 20 mm bore

(c) 25 mm bore

M&L for cutting, including screwing for alterations or additions & threading of existing 15mm bore steel tubing for alterations or additions (Each cut measured) complete all as specified and directed.

M&L for cutting, including screwing for alterations or additions & threading of existing 20mm bore steel tubing for alterations or additions (Each cut measured) complete all as specified and directed.

M&L for cutting, including screwing for alterations or additions & threading of existing 25/32mm bore steel tubing for alterations or additions (Each cut measured) complete all as specified and directed.

S & F in repairs gun metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI marked, complete all as specified and directed for the following bore dia of pipe:- (a) 15mm bore.

(b) 20 mm bore

(c) 25 mm bore

S&F in repairs 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 142 gms), complete all as specified and directed.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms), complete all as specified and directed.

S&F in repairs 25/32mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 455 gms), complete all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms), complete all as specified and directed.

S&F 25/32mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 455 gms), complete all as specified and directed.

M&L for cutting chases, pinning in, concrete block / brick / stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

M&L for cleaning and removing all dirt and scale etc from tank and from the mouths of circulating pipes for the tanks of following capacity of tanks including written of date of cleaning with white or black (As applicable) synthetic enamel paint complete all as specified and directed:- (a) Not exc. 500 Ltrs

(b) Exc. 500 Litres but n. exc. 1000 Litres.

(c) Exc. 1000 Litres but n. exc. 2000 Litres.

S&F in repairs lid / cover suitable for 500/1000 litres capacity PVC water storage tanks fixed with PVC locking arrangements complete all as directed

S&F in replacement rotational moulded polyethylene water storage tank 500 Litres capacity, double layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tanks and removing to store, including making all connections to inlet and outlet pipe lines, including providing of new tank nipples of suitable size, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement rotational moulded polyethylene water storage tank 1000 Litres capacity, double layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tanks and removing to store, including making all connections to inlet and outlet pipe lines including providing of new tank nipples of suitable size, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement rotational moulded polyethylene water storage tank 2000 Litres capacity, double layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tanks and removing to store, including making all connections to inlet and outlet pipe lines including providing of new tank nipples of suitable size, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall / ceilings, including taking down of old unserviceable pipe complete all as specified and directed. Note for item nos 18 & 19:- Rate quoted shall be deemed to be inclusive of the cost of necessary scaffolding & security measures as the work is to be carried out on elevated height upto 12.0 m high building.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/ ceilings including taking down of old unserviceable pipe, complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius 110 mm bore , complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius 75 mm bore , complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm bore , complete all as specified and directed.

S&F PVC SWR branch piece, (Double 'Y') equal or unequal of 110 mm bore , complete all as specified and directed.

S&F PVC SWR branch piece, (Double 'Y') equal or unequal of 75 mm bore , complete all as specified and directed.

M&L in replacement for PVC (SWR) gully trap 125/100mm, setting and jointing with solvent cement , complete all as specified and directed.

M & L in replacement of PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement , complete all as specified and directed.

M&L for 110mm PVC (SWR) WC connector with lip ring , complete all as specified and directed.

S&F 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement , complete all as specified and directed.

M&L for 40 mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kg/Sqcm with and including necessary fittings etc complete all as specified and directed .

S&F in repair chromium plated sensor pillar tap superior quality including all necessary arrgangement complete, Make:- CERA F-6010109 or equivqlent cat part from the makes as mentioned here-in-after complete all as specified and directed

S&F in repairs waste coupling / fitting, 32/40mm bore, brass chromium plated suitable for WHB & sinks, wash basin etc with long screwed shanks and flynut, flange end bedded complete all as specified and directed.

S&F in repairs PVC syphon with rod for low level flushing cistern including PVC handle with adjustable lever (flushing cistern kit ), complete all as directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded brick aggregate) as in coving rounded, chamfered, sub base above lean Concrete, tank stagging and other etc on sunken floor complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L for 300x300x 6 to 7mm thick, non skid, ceramic, coloured tiles, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete laid over and including 15mm thick screed bed in CM 1:6 complete including demolition of existing tiles of any description including removal of debries & demolished materials complete all as specified and directed.

M&L for matt finished, coloured ceramic tiles of size 600x600x7 to 8mm thick of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 etc as in flooring including demolition of existing tiles of any description etc including removal of debries & demolished materials complete all as specified and directed.

M&L for glazed coloured digital printed ceramic tiles of size 600x300x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including 15 mm thick rendering as in backing coat in CM 1:4 including triangular filleting in CM 1:4 on top edges including taking down of existing tles of any description and removal of debries & demolished materials complete all as specified and directed.

M&L for 20 mm thick Granite slab (of any type/colour) work (table rubbed and polished) in steps, pillars; window cills / jamb, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite. as counters of any radious etc laid over and including 20 mm thick screed bed in CM 1:4 including demolition of existing floor of any description including removal of debries & demolished materials complete all as specified and directed.

S&F in repairs PTMT waste fitting 32/40mm bore suitable for WHB / sink complete all as specified and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

M&L for repair of WC joint filling with white cement to stop leakage and finished properly complete all as directed by Engr in Charge.

S&F in repair PVC low level flushing cistern 10 ltrs capacity approved make including all internal fitting, pair of bracket, including inlet / outlet PVC pipe connections etc complete all as specifed and directed by Engr-in-Charge.

S & F in repairs vitreous china wash basin white flat back of size 550 mm x 400 mm including 32 mm dia CP waste coupling long screw, chain and plug and PVC waste pipe including CI brackets, etc. complete all as specified and directed.

S&F in repairs Bib taps, 15mm bore, CP fancy type with wall flange conforming to CAT No. CON- 037 Jaquar / 9206 (CASA) pf Prayag or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs Soap dish, CP fancy type CAT No. ACN-1131N Jaquar/BA-259 of Prayag or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No. ACN-111N of Jaquar/ BA-20 of Prayag or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs Health faucet CAT No. ALD-583KN of Jaquar/ BEA-85 of Prayag or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repair angular stop cock CP fancy type conforming to CAT No. 053 of Jaquar/ 9210 of Prayag or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs CP toilet paper holder conforming to CAT No. ACN-1151N of Jaquar/ BA-38 of Prayag or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs CP towel ring round with round flange conforming to CAT No ACN-1121 BN of "Jaquar" / 9218 of "Prayag" or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs CP wall mixer 3 in 1 including telephone shower for 15mm bore of pipe conforming to CAT No.CON 281 and HSH -1939 of Jaquar/ PIS-70 and BH-73 of Prayag or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs 2 way bib cock, CP fancy type with wall flange conforming to CAT No. CON 041N of Jaquar or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs Towel Rack, chromium plated 600 mm long with lower hangers stainless steel conforming to CAT No. AEC - 1181N of Jaquar or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 100 dia with 235 mm long arm with or without swivel joints, including fixing to steel pipe or union "Jaquar" or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs Pillar cock, CP fancy type, long neck with aerator CAT No CON-021KN of "Jaquar" or of equivalent make as specified here-in-after complete all as specified and directed

S&F in repairs satinless steel Robe Hook (khuti) with 5 Hook complete all as directed.

S&F in repair Sink Cock with swinging casted spout with aerator conforming to CAT No. SQN-522KN of "Jaquar" or of equivalent make specified here-in-after complete all as specified and directed.

S&F in repairs glass coner assembly cosisting of 5.5 mm thick sheet glass round 9" x 9" size with satinless steel railing complete all as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as directed.

S&F 100 mm dia Stainless steel, CP Grating with waste hole complete all as directed.

S&F 100 mm dia stainless steel, CP grating complete all as directed.

M & L for cleaning of roof area not exceeding 300 Sqm each and chajjas of bldgs front, rear and side complete. clearing mouth of rain water pipes and spouts in chajjsas etc complete including removals of roots of vegetative growth, algae, small plants and applying hydrochloric acid on the left over roof portion etc and making good the existing surface with cement mortar plaster in CM 1:3 mixed with WPC @ 3% of weight of cement, minium area of cement plaster per block - 05 Sqm, complete all as directed by Engr-in-Charge.

S&F in repairs PVC waste pipe, 32 mm bore of suitable length, suitable for sink etc complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm, suitable for hot & cold water complete all as specified and directed.

S&F in repairs framed work as in grills / guard bars, gratings, ladder / railings etc. with ends of bars shouldered and / or rivetted, or forged into spikes; framed guard bars; barred iron door, railings and similar work conforming to Fe 290.Gde -E-165, complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running railsand guides) and hanging, also fastening and fixing etc conforming to Fe 410-W, Gde -E-250 quality A complete all as specified and directed.

S&F in repairs PVC flexible waste pipe 32mm bore of suitable length, complete all as directed.

S&F in repairs spindles of any size suitable for concealed mixer valves, stop valves, angle cock, fancy taps including knob heads complete all as directed by Engineer-in-Charge.

S&F stainless steel channels 22 inch 550 mm suitable for kitchen drawer complete all as specified and directed . Make : Hittich or equivalent as approved

M&L for old size fly ash bricks, straight or curved on plan exc. 6 m mean radius built in CM 1:6 including dismantling of old existing brick / PCC block / stone wall etc. complete all as specified and directed.

M&L for cutting holes in brick wall built in cement mortar or cement lime mortar depth of embeded portion of hold fasts or lugs measured from the face of the jamb into the wall cutting n. exc. half brick and making good the dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and directed.

Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water including removal of debries & demolished materials complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on walls surfaces mixed with water proofing compound, finished even and smooth surfaces without using extra cement complete all as specified and directed. Note :- WPC will be measured and paid separatley.

M&L for dubbing out average 10 mm thick in cement mortar 1:4 on irregular face of old walls complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on walls surfaces finished even and smooth without using extra cement, complete all as specified and directed.

S&F in repairs 2nd class hard wood beading of sectional area 8 Sqcm to 12 Sqcm round beading to top & bottom of wall paneling work with and including melamine polish for architect look fixed with screws complete all as specified and directed.

Supply and Fixing in repairs of solid wall lining consisting of 5 mm thick, plain coloured or wood grain printed or as approved by the Engr-in-Charge / prelam PVC sheet used inclusive of solvent as per specification of manufacturer including dismantling of old unserviceable boarding complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work surfaces in cement mortar 1:4 mixed with water proofing compound finished the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC will be measured and paid separatley.

Supply and Fixing in repairs of 5 mm thick PVC sheet fillets of width 35 mm suitable for wall paneling inclusive of fixing as in grid / frame on wall suitable for wall lining / paneling as per specification of manufacturer, complete all as directed by Engineer-in-Charge

Supply only liquid water proofing compound complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour as per manufacturer's specification over and including 2 mm thick plaster of Paris putty including preparation of surfaces even and smooth complete all as specified and directed

M & L for preparation of surface of any description new plastered over 10 cm width or girth including and applying two coats of exterior weather paint complete all as specified and directed

S&F in repairs of aluminium powder coated single leaf door on pivots along with and including hydraulic door closer, door lock, handles, 6mm thick frosted / plane glass panel etc., fixed with rubber beading and glazing clips by using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved including taking down of old unserviceable existing one complete all as specified and directed by Engineer-in-Charge:- (a) Rectangular tube 14005 (b) Shutter vertical (c) Shutter top rail 19503 (d) Shutter Middle rail 060 (e) Shutter Bottom rail 19511 (f) Glazing clips 19352

S&F in repairs of aluminium powder coated partition by using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved with and including 12 mm thick both side pre-laminated particle board interior grade of approved colour as in bottom panel and 5mm thick plain glass at top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr using following aluminum section as specified in Jindal Catalogue, fixing to stone masonary walls with & including Ist class hard wood teak plugs of size 20mmX20mm at an interval of 0.5m alround the track including taking down of old unserviceable existing one complete all as specified and directed by Engineer-in-Charge:- (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352

S&F in repairs Mild steel, plain, black sheet of 1.60 mm thick as in door frame cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed on steel framing with riveted or welded seams, including bending or turning up, mitred complete all as specified and directed

M&L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in roof kerbs, rounded chamfered on edges, cill, plinth courses string courses, lacing courses, copings kneelers, apex including weathering, slightly rounded or chemfered angles and throating etc. including necessary form work complete all as specified and directed.

M&L for providing cement concrete type C- 1, 1: 3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protection finishing even and fair on top using extra cement with 6mm wide joints throughout the thickness of plinth protection including demolition of existing unserviceable plinth of any type and removal of debries complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each, complete all as specified and directed.

Taking down / cutting of steel windows shutter by means of gas cutter with out disturbing of sofit / jambs / cills etc of any description n. exc. 1.5 sqm (without taking off guard bar) complete all as specified and as directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36 mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge :- (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F in repairs stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.4 mm and fixed with stanless steel stepple to aluminum window shutter including taking down shutter from frame and refixing in frame complete all as specified and directed.

S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.4 mm and fixed with stanless steel stepple to aluminum window shutter including taking down shutter from frame and refixing in frame complete all as specified and directed.

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings, complete al as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles plain colour PVC sheet for top rail , lock rail & bottom rail either side & as gap isert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC beading and jointed together with solvent cement, supplying and fixing in the frame at site as per SSR Pt-I specification & drawing.

S&F 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both faces including with wooden edging / lapping arround the shutter to match complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both faces is to be with and including decorative face 0.9m thick veneer including with wooden edging / lapping arround the shutter to match complete all as specified and directed.

S&F pressed steel frames of size 105X60 mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up in hollow portion of the frame complete all as specified and directed.

S&F pressed steel frames of size 125X60 mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up in hollow portion of the frame complete all as specified and directed.

S&F in repairs 18/19 mm thick blolck board, grade-I quality, exterior grade type with decorative face veneer on both faces including lapping of edges fixed with screws to timber frame work as in CB partition and shelf and other works including dismantling of old existing unserviceable boarding complete all as specified and directed.

S&F 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed

S&F 150 mm long Extruded Aluminium alloy handles, cast type anodised ISI marked complete all as specified and directed .

S & F 100 mm size butt hinges extruded aluminum alloy with galvanized mild steel hinge pin anodized type C-21 complete all as specified and as directed

S&F 100 mm size hinges heavy weight, cold rolled mild steel and fixed complete all as specified and as directed

S&F 150 mm size Hasp and staple, aluminium anodised with mild steel hinges pin including bolt to hinges plate fixed with screw complete all as specified and directed .

S&F 100 mm stainless steel handle suitable for kitchen cabinet and drawer complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 30mm, complete all as specified and directed.

S&F of magnet catches and striking plate of suiatble size, complete all as specified and directed.

S&F in repair Aluminium (Extruded section body door closer hydroulically regulated designation No.3 universal typt , suitable for door shutter of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified and directed.

Removing of building / demolished materials & debries etc. to a distance of 4 to 5 Km beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M&L for preparation of old painted steel & iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair of floor door stopper of aluminium alloy body and anodised tongue with hard drawn steel spring,fixed in floor, overall length of cover plate is 150mm complete all as specified and directed.

M&L for 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass (with out sash bars), guage etc divided into squares with plain, chamfered or rounded, mitered and rebated sash bars any number, size of members of shutters as specifie in clause 8.24(a) of SSR Part-I 2009, complete all as specified and directed.

M&L for servicing only of top side hung / central hung lifting spring of existing steel rolling shutter by opening of top cover including greasing in side guides and other places and make smooth functioning and re-fixing top cover anchoring rod etc erected in position complete all as directed by Engr-in-charge.

S&F in repairs of steel rolling shutter, thickness of laths 1.00 mm, with ball bearing, side guides, central hung lifting spring, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, errected in position as directed at site, push pull or manual type, complete all as specified and directed by Engr-in-charge

S & F in repair 20 mm dia aluminium powder coated curtain rods with fixing fancy type, medium weight including bracket, stops, latoo etc fixed in repairs including taking down old one complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass spindle long leg 4 & 5 No. suitable for concealed stop cock 15mm bore size, complete all as directed.

Cleaning of blockage in rain water pipe by removing the Cl grating & roding etc and refixing old Cl grating in position, set in cement mortar 1:6, complete all as directed and as specified

S & F in repairs 05 Nos. & 04 Nos. brass spindle / brass face suitable for 15 mm wall mixer / WHB Mixer /Sink Mixer / CP pillar cock, complete all as directed.

S&F in repairs brass spindle 01 No. or 06 Nos. suitable for 15mm bib cock / stop cock / angle cock / CP piller cock, complete all as directed.

Petty repairs low level flushing cistern of any size / description for repair of leaking water by adjusting/ replacing the washer and adjustment of lever required for making the cistern functional, complete all as directed.

PRASHANT CONSTRUCTION (BID ID -3143855)

L.K.R.TIWARI CONSTRUCTION (BID ID -3135042)

TULSAYA CONSTRUCTION (BID ID -3137009)

R k construction (BID ID -3143977)