Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAdmitted-Finance 218 D 1A JYANTIPUR NEAR SHYAM PIPE FACTORY SULEM SARAI PRAYAGRAJ UP | PRAYAGRAJ | PRAYAGRAJ | UP | ₹25.9 L | L1 | Admitted-Finance |
| 2 | L2₹32.4 L+₹6.6 L (25.4%)Admitted-Finance | ₹32.4 L+₹6.6 L (25.4%) | L2 | Admitted-Finance |
| 3 | L3₹33.7 L+₹7.8 L (30.3%)Admitted-Finance | ₹33.7 L+₹7.8 L (30.3%) | L3 | Admitted-Finance |
| 4 | L4₹37.5 L+₹11.6 L (44.7%)Admitted-Finance MISRA ELECTROSTATE CENTRE BAR ASSOCIATION COMPOUND CIVIL COURT AYODHYA 224123 UP | AYODHYA | AYODHYA | UTTAR PRADESH | 224123 | ₹37.5 L+₹11.6 L (44.7%) | L4 | Admitted-Finance |
| 5 | L5₹43.3 L+₹17.4 L (67.3%)Admitted-Finance 161 SADAR BAZAR SADAR BAZAR CANTT AYODHYA UP PIN 224001 | AYODHYA | AYODHYA | UP | 224001 | ₹43.3 L+₹17.4 L (67.3%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | MISRA TRADING CORPORATION L4 | m/s allied enterprises L2 | M/s RAM LAKHAN GUPTA L1 | Jairajyadav security services L5 | Ajanta Motor Store L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place opening for inspection compete including back plate, heating element, inner copper tank etc, de-scaling back plate and heating element by cleaning with Sulfuric acid/ de-scaling compound and re-assembling of Geysers after repairs carrying out and re-fixing in same position (Replaced items such as spares measured and paid separately under relevent items) including making good to disturbed portin of walls with CM (1:3) or PCC (1:2:4 Type B1) and plastering the wall surfaces with CM 1:6 and replacement of old nuts, bolts and rubber gasket etc, complete all as specified and as directed by the Engineer-in Charge.
Note (1) Any type of rubber gasket , rubber washer, screws , insulating tape required shall be deemed to be included in the quoted rate.
Note (2) The descaling / cleaning the inner tank including denting and brazing the leakage joints / points till the leakage stops including carrying out minor repair of outer body surface, bottom and top cover complete all as specified and as directed by Engineer-in-charge and shall be deemed into the quoted rate and nothing shall be paid to any extra amount.
Note (3) The cleaning of all type dust, stains and painting of geysers with one coat of synthatic enamemel paint by spraying and refixing properly in the same location complete all as specified and directed by Engineer-in-Charge and nothing shall be paid to any extra amount. | 230 | Each Job | 200 ₹46,000 | 45 ₹10,350 Lowest | 140 ₹32,200 | 750 ₹1,72,500 | 100 ₹23,000 |
| 2.00 | S&F in repair/replacement heavy duty stainless steel inner tank suitable for 25 Ltrs capacity of geyser having high pressure bearing capacity including taking down existing copper / steel inner tank complete all as specified and as directed by Engineer-in-charge. | 10 | Each | 1,800 ₹18,000 | 1,140 ₹11,400 | 1,000 ₹10,000 | 1,750 ₹17,500 | 500 ₹5,000 Lowest |
| 3.00 | S&F in repair/replacement heavy duty stainless steel inner tank suitable for 50 Ltrs capacity of geyser having high pressure bearing capacity including taking down existing copper / steel inner tank complete all as specified and as directed by Engineer-in-charge. | 10 | Each | 2,200 ₹22,000 | 1,430 ₹14,300 | 2,000 ₹20,000 | 2,350 ₹23,500 | 600 ₹6,000 Lowest |
| 4.00 | S&F in repair/replacement 2.0 KW capacity Heating Element, Push/ Screw type with round/triangle mechanism and facilitate to fixing/holding of thermostate 'O' Ring type' including making electrical connection complete all as specified and as directed by Engineer-in-Charge. | 40 | Each | 450 ₹18,000 | 650 ₹26,000 | 350 ₹14,000 Lowest | 1,350 ₹54,000 | 1,200 ₹48,000 |
| 5.00 | S&F in repair/replacement 1.5 KW capacity Heating Element, Push/ Screw type round/triangle mechanism and facilitate to fixing/holding of thermostate with 'O' Ring type' including making electrical connection complete all as specified and as directed by Engineer-in-Charge. | 150 | Each | 400 ₹60,000 | 550 ₹82,500 | 340 ₹51,000 Lowest | 1,050 ₹1,57,500 | 700 ₹1,05,000 |
| 6.00 | S&F in repair/ replacement for Thermostat/autocut switches for geysers 25/ 50 Ltr capacity including making connection complete all as directed by Engineer-in-Charge. | 100 | Each | 170 ₹17,000 | 220 ₹22,000 | 120 ₹12,000 Lowest | 500 ₹50,000 | 200 ₹20,000 |
| 7.00 | S&F in repair/replacement safety valve spring locked type with inlet coupling all as specified and directed by Engineer-in-Charge. | 50 | Each | 90 ₹4,500 | 50 ₹2,500 Lowest | 200 ₹10,000 | 400 ₹20,000 | 50 ₹2,500 Lowest |
| 8.00 | S & F in repair/replacement of fusible plug for suitable capacity of geysers complete all as specified and directed by Engineer-in-Charge. | 50 | Each | 50 ₹2,500 | 105 ₹5,250 | 50 ₹2,500 | 120 ₹6,000 | 20 ₹1,000 Lowest |
| 9.00 | S&F in repair/replacement indicator lamp round /rectangular and making electric connections (Red/Green) 220 Volts AC as per site requirement suitable for geysers complete all as directed by Engineer-in-Charge. | 50 | Each | 10 ₹500 Lowest | 32 ₹1,600 | 30 ₹1,500 | 70 ₹3,500 | 10 ₹500 Lowest |
| 10.00 | S&F in repair/replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 25 Ltrs geysers complete all as specified and as directed by Engineer-in-charge. | 5 | Each | 300 ₹1,500 | 270 ₹1,350 | 200 ₹1,000 | 1,050 ₹5,250 | 100 ₹500 Lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
1 Aug 2025, 6:00 pmClosed
AGE(I) Ayodhya Cantt
Asst Garrison Engineer (I), Military Engineer Services, Ayodhya Cantt PIN-224001
REPAIRS/MAINT OF CEILING FANS, EXHAUST FANS, WALL MOUNTED FANS, GEYSERS AND CERTAIN MISC WORKS WITH ALLIED WORKS UNDER AGE (I) AYODHYA.
2025_MES_718358_1
8400/100/E8
Open Tender
Civil Works
Item Rate
180 days
Ayodhya Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE(I) Ayodhya Cantt
₹1 L
Yes
6 Aug 2025
3 Jul 2025
4 Aug 2025
3 Jul 2025
1 Aug 2025
18 Jul 2025
Amount
Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place opening for inspection compete including back plate, heating element, inner copper tank etc, de-scaling back plate and heating element by cleaning with Sulfuric acid/ de-scaling compound and re-assembling of Geysers after repairs carrying out and re-fixing in same position (Replaced items such as spares measured and paid separately under relevent items) including making good to disturbed portin of walls with CM (1:3) or PCC (1:2:4 Type B1) and plastering the wall surfaces with CM 1:6 and replacement of old nuts, bolts and rubber gasket etc, complete all as specified and as directed by the Engineer-in Charge. Note (1) Any type of rubber gasket , rubber washer, screws , insulating tape required shall be deemed to be included in the quoted rate. Note (2) The descaling / cleaning the inner tank including denting and brazing the leakage joints / points till the leakage stops including carrying out minor repair of outer body surface, bottom and top cover complete all as specified and as directed by Engineer-in-charge and shall be deemed into the quoted rate and nothing shall be paid to any extra amount. Note (3) The cleaning of all type dust, stains and painting of geysers with one coat of synthatic enamemel paint by spraying and refixing properly in the same location complete all as specified and directed by Engineer-in-Charge and nothing shall be paid to any extra amount.
S&F in repair/replacement heavy duty stainless steel inner tank suitable for 25 Ltrs capacity of geyser having high pressure bearing capacity including taking down existing copper / steel inner tank complete all as specified and as directed by Engineer-in-charge.
S&F in repair/replacement heavy duty stainless steel inner tank suitable for 50 Ltrs capacity of geyser having high pressure bearing capacity including taking down existing copper / steel inner tank complete all as specified and as directed by Engineer-in-charge.
S&F in repair/replacement 2.0 KW capacity Heating Element, Push/ Screw type with round/triangle mechanism and facilitate to fixing/holding of thermostate 'O' Ring type' including making electrical connection complete all as specified and as directed by Engineer-in-Charge.
S&F in repair/replacement 1.5 KW capacity Heating Element, Push/ Screw type round/triangle mechanism and facilitate to fixing/holding of thermostate with 'O' Ring type' including making electrical connection complete all as specified and as directed by Engineer-in-Charge.
S&F in repair/ replacement for Thermostat/autocut switches for geysers 25/ 50 Ltr capacity including making connection complete all as directed by Engineer-in-Charge.
S&F in repair/replacement safety valve spring locked type with inlet coupling all as specified and directed by Engineer-in-Charge.
S & F in repair/replacement of fusible plug for suitable capacity of geysers complete all as specified and directed by Engineer-in-Charge.
S&F in repair/replacement indicator lamp round /rectangular and making electric connections (Red/Green) 220 Volts AC as per site requirement suitable for geysers complete all as directed by Engineer-in-Charge.
S&F in repair/replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 25 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.
S&F in repair/replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 50 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.
S&F in repair/replacement bottom cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 25 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.
S&F in repair/replacement bottom cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 50 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.
S&F in repair/replacement of outer body fabricated of 1.6 mm MS Sheet for geysers of 25 Ltrs capacity duly painted with spray point with clamps 02 Nos of with necessary nut bolts complete all as specified and as directed by Engineer-in-charge.
S&F in repair/replacement of outer body fabricated of 1.6 mm MS Sheet for geysers of 50 Ltrs capacity duly painted with spray point with clamps 02 Nos of with necessary nut bolts complete all as specified and as directed by Engineer-in-charge.
S&F in repair/replacement of geyser assembly suitable for 25 ltr capacity ISI marked including dismantiling of old unserviceable geyser assembly complete all as specified and directed by Engineer-in-Charge.
S&F in repair/replacement of geyser assembly suitable for 50 ltr capacity ISI marked including dismantiling of old unserviceable geyser assembly complete all as specified and directed by Engineer-in-Charge.
S&F in repair/replacement PVC connection heavy duty with brass/PTMT nuts of requered length not exceeding 300 mm with rubber & PVC washer suitable for 15 mm bore GI pipe complete for cold water all as specified and directed by Engineer-in-Charge.
S&F in repair/replacement hot water outlet connection made of brass chromium plated with Union rubber washer suitable for 15 mm bore GI pipe for hot water all as specified and directed by Engineer-in-Charge.
S&F in repair/replacement modular sheet metal enclosure AC box with MCB SP 25 Amp complete all as specified and directed by Engineer-in-Charge.
S&F in repair/replacement plug top 15 Amps 240 Volts complete all as specififed and directed by Engineer-in-Charge.
S& F in repair/replacement 2.5 Sqmm 3 core PVC insulated sheathed stranded copper wire complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair/replacement wall mounted vertical electric water heater storage type 25 litrs capacity, easy to install/maintence friendly, single phase 230 volt AC, energy efticient minimum 5 star rating, rust free ABS body and single welded inner tank coated with corrosion resistant insulated material pressure rating 8 bar, complete with adjestable thromostate & pressure relief valve and other sefety feature to protect against high temprature, pressure, dry heating, thermal auto cut off/on functional and electric shock etc all as specified. Note:- Rate included for taking down old existing geyser declared BER of any type and capacity from site and deposit to MES store carefully without any damage.
Supply and fix in repair/replacement wall mounted vertical electric water heater storage type 50 litrs capacity, easy to install/maintence friendly, single phase 230 volt AC, energy efticient minimum 5 star rating, rust free ABS body and single welded inner tank coated with corrosion resistant insulated material pressure rating 8 bar, complete with adjestable thromostate & pressure relief valve and other sefety feature to protect against high temprature, pressure, dry heating, thermal auto cut off/on functional and electric shock etc all as specified. Note:- Rate included for taking down old unsv existing geyser of any type and capacity from site and deposit to MES store carefully without any damage.
Taking down defective exhaust fan upto 600 mm sweep, checking of faults and refixing the same in original position after cleaning, greasing and repairing of faults including replacement of unserviceable components. (Note : Items required for repairing will be measured and paid separately as supply only)
Supply only Exhaust fan blade suitable for 300 mm sweep
Supply only Exhaust fan blade suitable for 450/600 mm sweep
Supply only condenser 4/6 mfd for exhaust fan upto 600mm sweep with clip.
M&L for louver shutter suitable for exhaust fan of 300 mm sweep.
M&L for louver shutter suitable for exhaust fan of 350/380 mm sweep.
Supply only bush suitable for exhaust fan of 300 mm sweep
Supply only bearing(6200/6201) suitable for exhaust fan of 350/380 mm sweep
Supply only bearing (6202) suitable for exhaust fan of 450 mm sweep
Supply & fix exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V 50 Hz RPM 1200-1400 copper winding of sweep 250 mm Make-Philips/Usha/Bajaj/Havells
Supply & fix exhaust fan made of metal body complete with louvers shutter volt 230 V 50 Hz RPM 1200-1400 copper winding of sweep 300 mm Make-Philips/Usha/Bajaj/Havells
Supply & fix exhaust fan made of metal body complete with louvers shutter volt 230 V 50 Hz RPM 1200-1400 copper winding of sweep 450 mm Make-Philips/Usha/Bajaj/Havells
Rewinding of burnt exhaust fan of 300 mm sweep with super enamelled copper winding wire as per existing weight complete all as specified.
Rewinding of burnt exhaust fan of 350/380 mm sweep with super enamelled copper winding wire as per existing weight complete all as specified.
Rewinding of burnt exhaust fan of 450 mm sweep with super enamelled copper winding wire as per existing weight complete all as specified.
Taking down defective ceiling fan 1200/1400 mm sweep, checking of faults and refixing the same in original position after gressing and repairing of faults including replacement of unsv components. (Note : Items required for repairing will be measured and paid separately as supply only)
Supply only bearing 6201/6202 suitable for ceiling fan 1200/1400 mm sweep
M&L for MS fan hanger clamp with suitable bolts, nuts, washers, split pin and rubber reel.
Supply only condenser 2.5 Mfd suitable for ceiling fan 1200/1400 mm sweep with clip.
Supply only ceiling fan down rod 450 mm long (minium thickness 1.50 mm)
Supply only ceiling fan downrod 1200 mm long (minium thickness 1.50 mm)
Supply only ceiling fan downrod 5000 mm long (minium thickness 1.50 mm)
Rewinding of burnt ceiling fan of 1200/1400 mm sweep with super enamelled copper winding wire as per existing weight.
Supply and fixing in replacement ceiling fans BLDC complete with blades, down rods, remote control with suitabke size/capacity of battery, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE and 5 star rated 230 volt, 50 Hz, single phase with brushless direct current (BLDC) motor technology complete all as speified. Note:- Rate included for taking down old existing ceiling fan of any type and capacity from site and deposit to MES store carefully without any damage.
M&L for painting of ceiling fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc
S&F MS Fan hook with clamps, bolt nut etc suitable for fixing of fan with GI pipe or wood frame made by 40/50 mm dia or angle iron of size up to 50mm.
Taking down of defective wall mounted fan upto 400 mm sweep, checking of faults and refixing the same in original position after gressing and repairing of faults including replacing old components. (Note : Items required for repairing will be measured and paid separately as supply only)
Supply only bearing suitable for wall mounting fan upto 400 mm sweep
Supply only bush suitable for wall mounting fan upto 400 mm sweep
Rewinding of burnt wall mounting fan upto 400 mm sweep with super enamelled copper winding wire as per existing weight complete all as specified.
M&L for replacement of wall mount fan 400mm sweep capacity including all fitiing and fixtures all as specified and directed by Engr-In Charge
M&L for replacement of swing motor of wall mounting fan upto 400 mm sweep capacity all as specified and directed by Engr-In Charge.
Repair/maint/servicing of desert coolers upto 4000 Cum/hr by dismantling desert cooler complete disconnecting and removal of cooler fan and water pump, old wornout wood wool pads/khus pads etc and painting the complete cabinet of desert cooler externally one coat over existing coat including body side panel, front panel and internally with one coat of black synthetic enamel paint after complete rubbing and cleaning of wood wool and overhauling and painting of exhaust fan, kit fan general checking, greasing/oiling of pumps and fixing back to its existing position to make functional to the entire satisfaction complete all as specified.
S&F wood wool pads suitable for desert cooler upto 4000 Cum/hr capacity all as specified and directed by Engr-In Charge
S&F PVC pipe heavy duty 15mm bore from water pump to wool compartment of desert cooler upto 4000 Cum/hr capacity all as specified and directed by Engr-In Charge
S & F front grill of desert cooler complete all as specified and directed by Engr-In Charge
S & F bottom tank of desert cooler all as specified and directed by Engr-In Charge
S&F PVC water distributor 4 way suitable for desert cooler upto 4000 Cum/hr capacity all as specified and directed by Engr-In Charge
S&F rotary/bed switch 5 Amp suitable for desert cooler upto 4000 Cum/hr capacity all as specified and directed by Engr-In Charge
M&L for rewinding of fan motor of desert cooler upto 4000 Cum/hr capacity with copper winding wire of suitable guage all as specified and directed by Engr-In Charge
M&L for replacement of fan motor of desert cooler upto 4000 Cum/hr capacity single phase 230 volts 50 Hz all as specified and directed by Engr-In Charge.
Supply and fix in replacement of desert cooler (evaporator type) single phase 230 Volts 50 Hz , 4000 CUM/Hrs capacity PVC body with water storage tank 100-120 Ltrs with front grill motrorised operated swing motor with honycomb wood wool pad manual air diffusing system , 3 spped control regulator , ON/OFF switch, 2to 3 Mtr long 3 core copper cable with 3 pin plug top with water pumping set of suitable wattage submersible type complete with wheel mounting stand all as specified and directed by Engr-In Charge
S&F in replacement of water lifting pump vertical type single phase, 230V, 18 watt suitable for desert cooler upto 4000 Cum/hr capacity for water lifting upto 1.8 Mtr all as specified and directed by Engr-In Charge.
S&F fan blade with mounting legs and accessories for desert cooler fan upto 4000 Cum/hr capacity all as specified and directed by Engr-In Charge
m/s allied enterprises (BID ID -3370153)
Ajanta Motor Store (BID ID -3371552)
MISRA TRADING CORPORATION (BID ID -3370088)
Jairajyadav security services (BID ID -3370820)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .