SPL REPAIR TO TR HUT NO T-525 (OTM ACCN), T-73 AND T-75 (SINGLE JCOs LIVING ACCN) OF 9 MECH INF AT HISAR MIL STN UNDER GE HISAR

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and as directed. .

Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed.

Supply and fixing factory made single extruded WPC (wood polymer composite ) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade ),calcium carbonate and natural fibres (wood powder/rice husk /wheat husk )and toxic additives (maximum toxicity index of 12 for 100gms ) having miniumum density of 650 kg/cum and screw withdrawl strength of 1800N (face) & 900N (Edge ), miniumum compressive strength 50N/mm2,modulus of elasticity 850 N/mm2 and resisitance to spread of flame of class A category with property of being termite / borer proof ,water/moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws complete all as specified and as directed. (Note : Stainless steel butt hinges and necessary SS screws be paid separately)

S&F Factory made solid wire gauzed i.e. panel will be of wire gauze pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Single Side Prelam PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 900 bent edge & as gap insert for top rail & bottom rail; i.e. panel will be of wire gauze. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and as directed.

S&F 140 mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.

S & F in repairs 20mm dia curtain rails, mild steel, chromium plated with fixing brackets of fancy type complete all as specified and as directed.

S&F Aluminium ( extruded section) door closer hydraucally regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight bettween 61 to 80 kg and fixed, complete all as specified and diected .

S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified and as directed.

S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified and as directed.

S&F 100 mm long, Butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

M&L PCC type C1, 1:3:6 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, hold fast blocks, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 m and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and as directed.

M & L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:4) complete all as specified and directed.

M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:4) but except bricks (Brick shall be obtained from demolition. Unit rate for cleaning of old bricks shall be included in this item) complete all as specified and directed.

M&L for TMT mild steel bars 10 mm dia and over, cut to shape required, including cranking, bending spirally for hooping for coulmns, hooking ends and binding with and including mild steel (annealed) not less than 0.9 mm dia or secuing with clips complete all as specified and directed.

M&L for TMT mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to shape required, including cranking, bending spirally for hooping for coulmns, hooking ends and binding with and including mild steel (annealed) not less than 0.9 mm dia or secuing with clips complete all as specified and directed.

Use and waste of formwork to rough finished flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M&L for cement concrete design mix M-30 (20 mm graded aggregate) for slabs supported on walls, beams and collumns in floors, roofs, landings, balconies, canopies , deck slabs and in the shelves and the like and all other similar works complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) and finished fair and even without using extra cement on ceiling complete all as specified and as directed.

M&L 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only integral water proofing compound.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash.on wall complete all as specified and as directed.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash.on ceiling complete all as specified and as directed.

M & L for preparing newly plastered surfaces of walls and applying one coat of distemper oil emulsion over Chalk whitning, on plastered surfaces, preparatory to distempering complete all as specified and as directed.

M&L for Complete removal of existing treatment of any type from old surfaces of walls complete all as specified and as directed.

M & L for applying one coat of distemper oil emulsion on surfaces of completely removed existing surfaces wall complete all as specified and as directed.

M & L for preparing surfaces of external walls (newly plastered or completely removed existed treatment) and applying two coat of premium weather proof exterior emulsion paint over two coats of premium water proofing putty on external walls of approved make and color/shade complete all as specified and as directed by the Engineer - in - Charge. Note:- the above mentioned complete description/job will be executed by the approved genuine company/agency including labor and material and a minimum warranty of 5 years complete all as specified and as directed.

M & L for preparing surfaces of external walls (old completely removed existed treatment) and applying two coat of premium weather proof exterior emulsion paint over one coats of premium water proofing putty on external walls of approved make and color/shade complete all as specified and as directed by the Engineer - in - Charge. Note:- the above mentioned complete description/job will be executed by the approved genuine company/agency including labor and material and a minimum warranty of 5 years complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes complete all as specified and as directed.

M & L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M & L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles complete all as specified and as directed.

M&L for glazed ceramic tiles (coloured) 1st quality, 450X 350X 7mm / 300mm x 450mm x 7mm thick , on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over complete all as specified and as directed.

M & L 18 to 20mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Marble/granite including moulding to the edges to shape of bull nose complete all as specified and as directed.

Labour only for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F of steel work in tubular trusses and tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 including one shop coat of zinc chromate primer paint including preparation of surface complete all as specified and as directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L preparation of new steel or Iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L one coat of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges hips valleys as in roof covering complete all as specified and as directed.

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F of pre painted galvatume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and ountersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. WIND TIES for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-16. complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/ blankets any thickness and wall paneling including cover fillets complete all as specified and as directed.

S&F for GI frame work for ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre with GI Cleat and steel expansion fasteners with and including ceiling section ( not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips acrośs the intermediate channelat 45mm ceṇtre including 4mm thick non asbestos fibre cement building E boards fixed or laid/inserted to GI framework with screws for fixing in 600 mm x 600 mm grid, complete all as required at site complete all as specified and directed.

S&F 5-7mm thick hollow PVC wall lining, (Panelling) single side prelaminated with flat or fancy patterned on laminated side, PVC sheet inclusive of fixing with screws or with solvent cement required at site on walls including necessary corner angles, fillets etc required at site complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement complete all as specified and directed.

M&L broken stone or boulders for hard core of guage n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete type D2, 1:4:8 using 40mm graded stone aggregates as sub base to floor, complete all as specified and directed.

M&L for coloured chequred tiles, glossy finish, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigment, laid over & including 15mm thick screed bed in cement & sand mortar (1:4), complete, all as specified & as directed.

M & L plain cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) cast in situ in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed.

S&F Powder coated aluminium frame for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Powder coated Anodised aluminium windows, shutters/partition, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, tower bolts 02 Nos, handles 02 Nos in each shutter, hinges, anodised aluminum snap beading screws etc. including provision for cooler/AC opening wherever neccesary,complete all as specified and as directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. (Thickness or powder coating not less than 50 micron) complete all as specified and as directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F Mortice lock, vertical type, size 65 mm, brass 04 levers complete all as specified and directed.

S & F Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with Stainless steel wire staples complete all as specified and as directed.

S & F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work complete all as specified and as directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Re-fixing old steel tubing and connection 20mm bore in new or old position complete on wall/ceiling complete all as specified and as directed.

Taking down 15mm bore steel/ composite/ CPVC water tubing and connection from any position wall /ceiling surfaces or concealed including cleaning for re-fixing or removing from site of work complete all as specified and as directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 3- layer PP-R Polypropylene random copolymer) 20mm outer dia concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded fitting polypropylene laid in floor/wall/ceiling complete all as specified and directed. Note : Work will be done under authorised/concerned company's supervision.

S&F in repair gun metal globe gate valve 20 mm bore complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20 mm bore pipe.(Make :- "Sintex") inculding dismantling of old water tank complete all as specified and as directed.

Taking down soil/waste/vent and rain water pipes including all fittings of any size and pattern in any position complete all as specified and directed.

S&F 50mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F 50mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm laid (concealed) in trenches after Cutting chases, pinning in and making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, for drain/spouts pipes or other purposes for waste water etc., and making good, cutting not exc 10 cm girth to concrete surfaces/walls,ceilings or in floors/sunken floors etc, complete all as specified and directed.

S & F 75 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints fixed to wall including necessary nails, plugs and holder bats etc complete all as specified and as directed.

S & F 75 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints laid in trenches or in floor (concealed) after Cutting chases, pinning in and making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, for drain/spouts pipes or other purposes for waste water etc., and making good, cutting not exc 10 cm girth to concrete surfaces/walls,ceilings or in floors/sunken floors etc, complete all as specified and directedincluding necessary nails, plugs and holder bats etc complete all as specified and as directed.

S & F 110 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints fixed to wall including necessary MS flat Iron clamps of size (40 x 4mm) complete all as specified and as directed.

S&F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) bends provided with access door of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.

S&F PVC (SWR) junction, single, (single T) equal or unequal 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction, single, (single T) equal or unequal 75mm bore complete all as specified and directed.

S&F in repairs, PVC (SWR) 75 mm dia, floor trap, plain grating with/without hole including jointing to waste pipe with solvent cement complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement all as specified and complete all as specified and as directed.

S & F in repair Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and seat cover with Mild steel chromium plated hinging device complete all as specified and as directed.

S& F in repair 15 mm CP 2-in-1 stop cock/bib tap fancy type for fixing of health faucet or jet spray for the WC and complete all as specified and directed.

S& F in repair Brass SS Jet Spray with 1 m pvc tube and complete all as specified and as directed.

S&F in repairs health faucet 15mm bore with 1.0 m tube & hook (Braded tube) complete all as specified and as directed

S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed.

S & F in repair Vitreous China wash basin, white, flat back, size 630 x 450mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F 40mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm as waste pipe for WHB/Kithcen sink etc., fixed complete by cutting hole into or through brick wall built in CM by using appropirate bend or bottle trap, passing another side of wall, connecting to main waste pipe line and making good in CM (1:3) cutting not exceeding 10cm in girth complete all as specified and directed.

S&F 40mm Bottle trap of PTMT for WHB/Kitchen sink etc.. having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.

S&F 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed.

S&F CP Central Hole Basin Mixer with ‘U’ shape Round Casted Spout with 450 mm Long Braided Hoses complete all as specified and directed.

S&F only 600mm x 450mm bevelled edge mirror of sellected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair 15 mm fancy type, chromium plated with long shank and cup (concealed type) Stop valves, cast copper alloy, screwed down, high pressure screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed.

S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F corner glass shelf 300mm (with brass brackets) complete all as specified and directed.

S&F in repair Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F SS , premium type , peg set 6. heavy weight complete all as specified and directed.

S&F in repairs 15mm bore dia brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed .

S & F in repairs 15 mm bore chromium plated fancy type bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm Stop valves/angle stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including modular press steel with cover plate and frame, complete, all as specified & directed.

All as per item No. 111.00 (here-in-before) but for one fan/ Exhaust fan point controlled by one Number one way switch.

All as per srl item No. 111.00 (here-in-before) but for 15 Amp socket out let by using 2.50 sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed.

All as per item No. 111.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board.

All as per item No. 111.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.

S&F modular type switch flush type, single pole, one way, 15 Amp, 230 Volts.

S&F flush type socket outlet multipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.

S&F modular type switch , flush type, single pole, one way, 5/6 Amp, 230 Volts all as specified & directed.

S&F modular type socket outlet multipurpose 3 Pin 5/6 Amp (with 2 pin outlet also) 230 volts AC complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F in repair of modular type ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F LED lights fitting 1x 40W, 240V, 50HZ, regal batten for LED incl ultra bright glass LED tube light aluminium housing with very high efficiency, singel / double side connection complete.

S&F in reapir of street light LED light fitting 20 watt,240V, 50 HZ, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.

S&F in repair of MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed.

S&F in repair of M.C.B. SPN, 240 Volts, 40 Amps breaking capacity 10 KA complete all as specified and directed.

S&F in repair of sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-I) including taking out old existing earthing complete all as directed.

Supplying,installing,testing & commissioning, storage water heater (geyser), 25 litres and 2 KW capacity, standing loss less than 0.562 kwh per day for 45 C difference of temperature as per IS 2082 ( five star rated as per BEE), reheating time less than 60 minutes, mixing factor less than 20%, shock proof high density PUF insulation body material, glass lined inner tank material having warranty 5 years minimum for tank material, 4 years on heating element and 2 years on other spare parts including comprising following fittings:- (a) Capillary type thermostat. (b) Digital display unit. (c) Thermal cutout. (d) Multifunction valve (e) Flexible cable of suitable length with three pin plug 16 A capacity. (f) Drain plug (g) Fusible plug fitted on the crown of water heater with operating temperature between 40 degree centigrate to 75 degree centigrate including fixing by grouting and fastener complete all as specified and directed.

Supply and fixing in repairs exhaust fan motor suitable for 225/250 mm sweep,single phase 240 volt AC, copper winded having minimum 1400 RPM complete all as specified and directed by Engg.

S&F sheet metal enclosure Double pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB

M&L in repair Sub main wiring using two single core cable PVC insulated unsheathed of copper conductor FRLS cable of size 4 sqmm, 1100 votls grade drawing through and including PVC conduit 25 mm dia including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 4 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed including taking down old unserviceable submain wiring. Note:- Two lengths of 4.0 Sqmm cable, one length of 4 Sqmm cable and one length of PVC conduit will be measured as one length.

S&F in replacement LED lumianire 600mm x 600mm, capacity 35/36 Watt,(warm white / cool day light/ natural light) 220 V AC, surface mounted type with high efficiency PMMA diffuser soft glase free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flrxible copper conductor of suitable size complete all as specified and directed.

Supplying, laying, jointing, testing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade complete of size 16 sqmm 2 core all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc complete all as specified and directed by Engr-in- Charge.

Supply and fix cable cover HDPE DWC pipe of size 40 mm internal Dia minimum for protection of XLPE cable 1100 volts 35 Sqmm size as per IS 14930 complete all as specified and directed by Engg-in-charge.ote:(i) Cost of clamps/screws/nut/bolts etc required for fixing the cable is included in this item and nothing will be paid extra on this account..

Excavation in trenches in soft/loose/hard/dense soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm thick etc complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point etc complete all as specified and directe.

Please Enable Macros to View BoQ information