REPAIR TO JOINERIES AND OTHER MISC WORK IN TECHNICAL AND DOMESTIC AREA AT AF STN PURNEA UNDER AGE I AF PURNEA

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, one face is covered with decorative face veneer with lipping/frame to match commercial type on both sides complete all as specified and directed.

S&F 35mm thick of 2nd class HW glazed and skeleton shutters in chowkats, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fixed to chowkhats,complete all as specified and as directed.

M&L for rolled mild steel Framed work Fe 410 -W (Gde- E- 250) quality- A-as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing , complete all as specified and as directed.

S&F 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt ,complete all as specified and directed.

S&F mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate,complete all as specified and directed.

S&F 150 mm long mild steel pressed steel handle, oval type, stove enameled black,complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel to wooden or steel frame including necessary screw/bolt/welding complete all as specified and directed.

S&F in repair mild steel helical / ordinanry rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed to wooden or steel frames with welding ,complete all as specified and directed.

S&F in repair 150mm (overall length of cover plate) floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified & diretced.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screwsall complete as per architectural drawings and the directions of Engineer-in-charge.complete all as specified and as directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.complete all as specified and as directed.

S&F 4.8mm thick tinted glass square/rectangular n.exc 0.5 Sqm in each pane fixed to aluminium frame including rubber beads and other necessary accessories, complete all as specified and as directed.

S&F 4.0 mm thick one side frosted glass square/rectangular n.exc 0.5 Sqm in each pane fixed to aluminium frame including rubber beads and other necessary accessories, complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.complete all as specified and directed.

Supply and Fix, factory made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm thick prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F 150mm size aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150mm size and aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Dismantling of wall and ceiling boards or insulation boards any thickness including cover fillets etc, complete all as specified and as directed.

M&L for cabinet/cupboard in required size at site made out 18mm thick one side decorative lamination sheet consisting of carcass 18mm thick PVC sheet & provn of shutters made out of 18mm thick one side decoartive laminated PVC sheet all reqrired brackets 5.5 screws etc. the panels shall be fabricated using adhesive, screws, SS hinges, SS Catcher, SS Tower bolt, SS Heps & Staples where ever required. All the edbes shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mention as per drawing approved by Engr-In-Charge. complete all as specified and as directed. Note:-Design, colour and pattern shall be as directed and approved by AGE(I). Make: Rajshree/Sintex/Godrej.

Resecuring or easing & adjusting shutters of any description n exc 1 sq.m each without taking down, also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hardware articles,complete all as specified and as directed.

Resecuring or easing & Adjusting Shutters of any description but exc 1 sq.m and n.exc 2 sq.m each with out taking down, also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hardware articles,complete all as specified and as directed.

S&F door seal 1.00 Mtr length in black colour for preventing of ant, snake, rats etc , complete all as specified and as diretced.

M/s.Abhay Kumar Roy (BID ID -3331236)

M/s.Asha Enterprises (BID ID -3331175)

M/S. R.D. Construction (BID ID -3331264)

M/S. KESHAB CHANDRA GHOSH (BID ID -3331444)

M/S SATISH KUMAR SINGH & SONS (BID ID -3331302)

M/s. Rakesh Roshan (BID ID -3331285)

RAJEEV KUMAR (BID ID -3331631)