Supply, Installation and Commissioning of LED High Mast Lighting with all accessories at Melakhola Bus Stant under Salanpur G.P within Salanpur Block, Dist. Paschim Bardhaman

Amount

Supply & delivery at site of 16 M high mast lighting tower in two section, single weld and single dip galvanized with head frame, pulley assembly, lantern carriage, rubber padded guide ring, double drum winch, s/s wire ropes, multi core copper trailing cable suitable for HM lighting Tower, power tool with contactor based reversible starter, lighting arrester, distribution box. Sheet thickness for the bottom & top section shall be at least 5 & 4 mm respectively and the larger diameter of the bottom section shall not be less than 500 mm. (Make – BPP/Bajaj/Uttakarsh Pipe/Subham Pole)

Design & construction of civil foundation for 16 m High Mast, taking actual site condition into account including excavation of earth, supply of cement sand ,reinforcement steel bars, shuttering materials, labour etc. complete with refilling of earth to the existing ground level locations of High Masts ,suitable measures are to be taken so as to ensure High Mast flange at 300 mm above the ground level. Prior approval of design parameters shall be necessary.

Assembly of 16 m High Mast with all its accessories, erection testing and commissioning of the same with the help of crane or derrick system, fixing and wiring of luminaries with all materials and labour.

Supply & fixing of Aviation Obstruction luminaire similar to Bajaj make, Cat No. BJAOL – 2 including CFL lamps and other accessories complete for ready use on lantern carriage. Make – Philips/Bajaj/Crompton.

Supply, fixing, connection & testing of outdoor type Flood light fittings of IP66, IK08 LED Integral type flood light luminaire with system lumen > 45000 system wattage not more than 405 W with pressure die cast aluminium housing, LM 80 For LED Source & LM79 for Luminaire is mandatory, Surge Protection Minimum 10 KV/KA. Supply, fixing, connection & testing of outdoor type Flood light fittings of IP66, IK08 LED Integral type flood light luminaire with system lumen > 45000 system wattage not more than 405 W with pressure die cast aluminium housing, LM 80 For LED Source & LM79 for Luminaire is mandatory, Surge Protection Minimum 10 KV/KA. Make: Philips (Fittings Cat no. BVP383 LED 450/CW 400W 220-240V SWB IN)/ Appvd. equivalent from Crompton/ Bajaj/ Wipro.

Supply of PVC / SWA / PVC armoured Al. Cable at work site of size 16 sq.mm x 4 core of make – Polycab/Finolex/KEI

a) Laying of cable in underground trench 460 mm wide x 760 mm average depth,with brick protection on the top of the cable with 8 (eight) Nos. brick per meter,including filling the space between the brick & cable and also the trench with shifted soil, levelling up and restore the surface duly rammed. (PWD, Page F-2, Item 1.a)

b) Laying of above cable through Pipe/Pole etc. PWD, Page F-1, Item 3 (a)

Supply, installation, commissioning & testing of outdoor type feeder pillar box made of 2 mm CRCA sheet duly rust inhibited and stove enamel painting, complete with rubber gasket, hinged door at least 800 x 450 x 200 mm in size projected top cover, suitable ventilation and MS iron frame work with adequate space for provision of WBSEDCL meter. The panel consisting with 63A TPN MCB incoming, Astronomical time switch, toggle switch, contractor of L&T make for automatic operation of street light system .

Earthing with 50 mm dia GI pipe 3.64 mm thick X 3.04 Mtrs long and 1 x 4 SWG GI (Hot Dip) wire (4 Mtrs long), 13 mm x 80 mm long GI nuts bolts with double washer including (Tata-Medium GI pipe) making digging of soil etc. complete. PWD, Page G-1,Item 2(a)

Treatment of soil by using salt and charcoal or coke. (PWD, Page F-1, Item 3.a)

Supply & laying of GI pipe 50 mm dia,medium gauge of ISI approved make. (PWD Schedule Page F-6, Item 11. d).

Excavation of soil for installation of Earth Electrode and filling and ramming. For soft soil.

Excavation of soil for installation of Earth Electrode and filling and ramming. For morrum soil.

Extra for treatment of soil by using salt & charcoal or coke for electrode.

Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor/through pipe with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid GI wire. a) 4 SWG.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 16 sq. mm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying & fixing solderless socket (Dowels make), tapes, anticorrosive paste and jointing materials: 4C x 16 sq. mm cable.

Supply at the work site of 1100 volt grade 1.5 sq. mm FR PVC insulated single core unsheathed multistrand copper cable conforming to IS: 694:1990. (Ph., N & E) from pole box to light fitting as per direction of EIC. Finolex/KEI/ Polycab/ Mescab.

Drawal of 1100 volt grade 1.5 sq. mm FR PVC insulated single core stranded copper wire conforming to IS: 694:1990 (Ph., N & E) from pole box to light fittings as per direction of EIC.

Painting of Steel Tubular Pole of lengths and no. of coats of paint,as given below with ready mixed paint/primer of approved make,and brand incl. preparation of surface by sand paper/emerypaper, cleaning etc. for receiving fresh coat of paintUpto 9.0 mtr. long pole , 1st coat of aluminium paint over 1 coat of RO priming

Painting of Steel Tubular Pole of lengths and no. of coats of paint,Upto 9.0 mtr. long pole , 2nd coat of aluminium paint over 1st coat. as given below with ready mixed paint/primer of approved make,and brand incl. preparation of surface by sand paper/emerypaper, cleaning etc. for receiving fresh coat of paint , Upto 9.0 mtr. long pole, 2nd coat of aluminium paint over 1st coat.

P. K. ENTERPRISE

Bengal Electrical Repairing Shop