ADDN/ALTN TO LADIES TOILET BLOCKS OF EOL FF IT GF AND FF SERVO FF AND WORKSHOP OF TECH A AND B AREA AND ROOF TREATMENT IN BLDG NO P-61 AT IRDE AND REPAIR/MAINT OF CERTAIN E/M ITEMS AT DS CELL RAIPUR UNDER GE (I) RND DEHRADUN

Amount

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each including removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each including removing from site complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

Demolition of Cement concrete (un-reinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation/ subbase for laying floor finishes complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 350x 250x 7 mm/ 450X 350X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Granite 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for and removing demolished materials to a distance exceeding 250 Mtr complete all as specified and directed.

M&L for RCC 1:2:4 (type B-0 using 12.5mm graded stone aggt) for slabs supports on walls complete all as specified and directed..

M&L for use and waste form work to soffits of suspended slabs such as roof slabs , floor slabs, landings and similar work for fair finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 08 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and recast concrete articles complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as specified and directed.

M & L for rendering 15 mm thick on brick work or concrete surface in cement mortar 1:6 finished fair and even complete all as specified and as directed.

M & L for preparation of new plaster surface or wall and applying two coats of Distemper oil emulsion, white or tinted on over and including a coat of 3 mm thick wall care putty complete all as specified and directed.

M&L for preparing old decorated surfaces of walls plastered or un plastered by brooming down with steel or wire brush and scraping down smoke moulds moss and efflorescent salt and treading oil and greasy spots, washing rubbing down and stopping of distempered and painted surfaces & removing all vegitatation and making good holes, crakes complete by necessary putty and applying two coats of aclyric plastic emulsion paint on old prepared surfaces of walls complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter of walnut colour (as approved by GE) with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain walnut colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing.

S&F 100 mm long mild steel butt hinges, medium weight cold rolled including welding if required complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 125 mm size aluminium handles,cast type anodized D type complete all as specifed and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed.

S&F, laying and testing for 15 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

S&F, laying and testing 20 mm bore GI tubing medium grade galvanised steel including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe with chromium plated spring type cover complete with fixing arrangement fancy look complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set in plain cement concrete (1:3:6) type C-1 and connecting to flusing cistern and trap & connecting fittings as required and making good to floor, complete all as specified and directed.

S&F, in repair PVC Flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket complete all as specified and directed.

S&F in counter top wash hand basin coloured oval type 550x445 mm fixed over all including 18 MM thick granite slab of Appropriate size including brackets, PVC connection waste pipe waste coupling etc complete all as specified and directed. Make: Parryware cat No: C 0431 popular for counter type and bolan code no 9901 / 9811 or equivalent in Jaquar/Hindware as approved by GE. Note:- Granite slab will be measured and paid separately

S&F in repair fancy type Pillar cock long neck with base flange complete all as specified and as directed.

S&F in repair 2 Way Bib tap, cast copper alloy fancy type suitable for 15 mm dia pipes complete all as specified and as directed. Make : Jaquar Cat No KUB-35041F or equivalent in Parryware/Hindware as approved by GE.

S&F hand shower (health faucet) ABS body with 8 mm dia,1 mtr long flexible tube &wall hook complete all as specified and as directed. Make : Jquar Cat No. ALD-CHR-593N or equivalent in Parryware/Hindware as approved by GE.

S&F Corner glass shelf complete all as specified and as directed. Make : Jaquar Cat No ACN-1173 or equivalent in Parryware/Hindware as approved by GE.

S&F in repair Soap dispensor with glass bottle complete all as specified and as directed. Make : Jaquar Cat No. AKP-35735P or equivalent in Parryware/Hindware as approved by GE.

S&F in repair, single towel rail 600mm long complete all as specified and as directed. Make : Jaquar Cat No. AKP-35711P or equivalent in Parryware/Hindware as approved by GE.

S&F in repair, towel ring square complete all as specified and as directed. Make : Jaquar Cat No. AKP-35721P or equivalent in Parryware/Hindware as approved by GE.

S&F in repair, stainless steel toilet roll holder with flap complete all as specified and as directed. Make : Jaquar Cat No. AKP-35753P or equivalent in Parryware/Hindware as approved by GE.

S&F in repair 18 to 19 m thick solid factory made PVC board board for cup board/cabinate shutters with one side laminated printed PVC sheet other side plain PVC sheet fixed with & including suitable PVC frame and Magnetic door catcher as per specification & drawing complete all as specified and directed.

S&F PVC connection 15mm bore 450mm long with brass nuts and washers on both sides as complete as specified and as directed.

S&F continous (piono) hinges mild steel, bright finish or electrogalvanised with width of flap (when open) 20 mm complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting for cabinets fixed with screws complete all as specified and directed.

S&F brass handles, cast type, polished bright 100 mm size complete all as specified and directed.

S&F 125 mm long hasp & staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F 40 mm thick first class hard teak wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F brass handles, cast type, polished bright 150 mm size complete all as specified and directed.

S&F 100 mm size heavy weight, butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, fixed in repairs complete all as specified and directed.

S&F aluminium (die cast) body door closer hydraulically regulated, designation No.3 universal type, suitable for doors shutters up to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete allas specified and directed.

S&F powder coated of any colour aluminium window and ventilators shutters, side hung type without sashbars, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking,anodised aluminium snap beading, screws,anodised aluminium fittings such as peg stays 150 mm long (1no) hinges type B-21 100 mm long (2 no) suitable handles 01 Nos locking arrangment, complete all as specified and directed. (panels likes prelaminated particle board / sheet glass shall be measured and paid seprately)

M&L for 4.8 mm thick sheet glass ordinary quality in panes not exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

S&F in repairs Rotational moulded polyeth Water Storage Tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

S&F in repairs vitreous china urinals, flat back of size 465mmx355mmx265 mm, white minimum incl grating and union for discharge pipe complete incl providing & fixingplugs, bedding urinal against wall in cement mortar 1:2, securing urinals plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

Taking down Cast iron/PVC pipe of any dia and size fixed on wall or floor including all fittings complete all as specified and directed.

S&F 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed..

S&F 110 mm dia PVC(SWR) bends/ shoes any radius complete all as specified and directed.

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium body, designation No.3, universal type, suitable for door shutters of weight between 61 to 80 Kg, complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0 (1:2:4) 12.5mm graded aggregate as in sub base for floors complete all as specified and directed.

M&L for sunken floor treatment as specified here-in-after, applying a priming coat of suitable primer over cleaned concrete surface, applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm, applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application and finally applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm over polymeric membrane complete all as specified and directed.

S&F in repair CP unirnal Push Cock incl necessary fittings all as specified and directed.

S&F in repair CP Urinal Spreader incl necessary fittings all as specified and directed.

M&L for cleaning of roof slab,parapets and beams including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane, complete all as specified and described as under :- (a) Preparation of surface and applying one priming coat of cold bituminous primer @ 0.30 kg / sqm. (b) Supply & providing APP modified polymeric water proofing. membrane 3 mm thick of weight not less than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) centre core including coating the surface with the compatible primer and torch application of membrane with minimum 10 cm overlaps in sides and 15 cmoverlaps in end as required thereof, complete all as specified and directed. (c) Applying one more coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over which one coat of aluminium bituminous paint @ 0.10 Kg/Sqm shall be applied. NOTE:- The work of water proofing treatment shall be got executed throughh expert team of manufacturers or authorised applicator of manufacturer.

M&L for taking down/dismantling of existing roof treatment / cement plaster of any description such as PCC Padding/ Coba treatment/ mud phuska/Lime conc terracing including screed bed etc. Hessian base felt/tar felt etc. (any type and thickness) complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on roof surface including mixed with liquid WPC as per manufacturer's instruction's and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for separately as supply only under respectiveitem of sch 'A'.

Supply only liquid water proofing compound complete all as specified and directed.

Taking down exsiting water proofing treatment with and incl PCC padding, plaster, etc complete necessary removal of debries from site complete all as specified and directed.

M & L for 40 mm thick PCC (1:2:4) type B-0, (using 12.5 mm graded crushed stone aggregate) in two layers (each 20 mm) with chicken mesh provided between the layers and finished even and smooth with false grooves @ 450x450 mm complete all as specified and as directed. (Note: Chicken wire mesh shall be measured and paid separately under respective item of sch 'A").

M & L for Galvanised steel wire netting of 0.91 mm dia of wire and size of mesh 20 mm complete all as specified and directed.

M&L 10mm thick screed bed on fair face of concrete surface including repair of doubing roof surfaces in CM 1:3 finished fair and even without using extra cement over complete all as specified and directed.(Water proofing compound shall be and paid sepratly)

Preparing RCC roof slab top by wire brushing and cleaning the dust and forign materail etc complete and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm over a coat of bitumen primer @ 0.40 ltrs/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing 3kg/Sqm and will be laid as per MES SSR Pt-I para 11.43.2.2 with minium side lap 75 mm and end Lap of 150 mm bonded with hot blown bitumen 85/25 gde penetration @ 1.20 kg/sqm and blinded with fine sand in dry condition (pleable free) @ 0.50 kg/sqm dusted over the bitumen coat complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including racking out joints, hacking for key scrubbing down with water etc complete all as specifed and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A.

Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for preparation of new plaster surfaces of wall applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied and 0.90 litre/10sqm over new surfaces external surfaces of wall complete all as specified and directed.

M&L for cement concrete tiles 20cmx20cmx20mm thick machine pressed, set jointed and pointed in neat cement slurry in roof over and including 15mm thick cement screed bed in CM 1:4 with water proofing compound, complete all as specified and directed. (ii)Water proofing compound shall be measured and paid separately.

Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings etc removing materials for store for keeping in safe custody or for taking credit (credit for above items should be taken as per conditions separately) and making good disturbed surfaces of walls, floors etc as specified and directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch. Make of cable:Polycab/Havells/Gloster, Make of conduit: Finolex/Polycab/Supreme

All as per Srl item No 80 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.

All as per item No 80 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete all as specified and directed.

S&F Angle holder, insulated polycabonate body with back plate suitable for batten fittings suitable for one number LED lamp complete all as specified and directed. Make -Anchor Penta/Legrand/Havells

S&F in replacement of UNSV Compact commercial batten with LED universal batten fitting suitable for single T8 LED tube complete all as specified and directed. Make:Crompton/Havells/Phillips

S&F in replacement of UNSV fluorescent tube light with LED tube light 16 Watt T8 double sided connection with built-in driver, THD not more than 10% complete all as specified and directed. Make:Crompton/Havells/Phillips

Supplying, fixing & testing surface mounting in built ,24 Watts,2'x2' LED ceiling light fitting with slim line extruded aluminium/ CRCA body, opal acrylic diffuser, electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- Crompton/Phillips/Havells as approved.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (1991) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified and directed.

Supply and fix exhaust fans AC single phase 230/240V made of steel of size 300 mm sweep with louver and with all accessories complete all as specified and directed.

S & F in replacement of unsv switch piano single pole flush type 6 amps, 230 volts complete all as specified and directed. Make: Anchor Penta/Havells/Legrand as approved.

S&F socket out let 3 pin 6 Amps flush type complete all as specified and directed. Make: Anchor Penta/Havells/Legrand as approved.

S&Fswitch piano flush type single pole way 16 Amps complete all as specified and directed. Make: Anchor Penta/Havells/Legrand as approved.

S&F socket outlet 2 in 1 3 pin 5/16 Amps flush type complete all as specified and directed. Make: Anchor Penta/Havells/Legrand as approved.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built Heating and Cooling arrangement and Digital Inverter twin rotary of capacity 2 TR with and including voltage stabiliser of 5 KVA complete all as specified and directed.

S&F Single pole and neutral enclosure industrial type with a two pin and earth plug and socket complete with one single pole and neutral MCB 20 amp,240Volts power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet complete all as specified and directed. Make - Legrand/L&T/Indoasian

M&L for submain wiring of size 2x6 sqmm + 1x6 sqmm earth wire FRLS PVC insulated copper conductor, single core cable in concealed medium class PVC conduit of size not less than 25 mm and repairing the disturbed surfaces with sand, cement etc and paint the repaired surface with the same colour as that of wall/surface complete all as specified and directed. Make of cable: Polycab/Havells/Gloster

OM TRADERS

Bedi Refrigeration Works

AKANSHA.ASSOCIATES

Amit Associates

M/S DHYANI CONSTRUCTION CO.

ANEJA AND COMPANY