Repair to toilets inside factory premises at OFCd

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Dismantling Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles in cement mortar.

Demolition of PCC Concrete of any description and in any position not otherwise specifically provided for.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface (broken stone or boulders).

M&L cement concrete M-15, 1:2:4, 20.0 mm graded aggregate in foundation filling and mass concrete and finished surface even and smooth.

M&L for Concrete bed to drain pipes including forming cradles; in Cement concrete 1:4:8 type D-2, 100 mm bore dia

M/L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat Rough finished surface of concrete.

M/L for RCC (Reinforced cement concrete) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like M20 & 20mm graded aggregate.

S&F of TMT Bars 10 mm dia and over cut to length,bent to shape required, including cranking bending spirally for hooping for columns, hooking each, binding with and including mild steel wire(annealed) n.less than 0.9mm dia or securing with clips.

M&L for Brick work with sub class 'B' bricks,straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete withCement mortar 1:4

M&L Taking down old cement mortar plaster on wall including raking out joint hacking, scrubbing down with water.

M&L for applying neat cement slurry & rendering 15mm thick cement plaster 1:4 on wall.

M&L for brushing neat cement slurry with 3.0 kg/sq.m & laying 20.0 mm average thick screed bed 1:4 and maintaining proper cross slope for effective drainage.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ®Light shade (Make- Johnson / Kajaria/ Nitco)colour tile.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (coloured tiles).(Make: kajaria, johnson, Nitco)

S&F Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.20mm

M&L for preparing the old painted surfaces, apply plastic interior emulsion two coat Surfaces of any description over 10cm girth or width, not otherwise described (Asian paints/ Nerolac, Berger) as approved by EIC.

M&L for preparing old painted surfaces of steel apply two coats of synthetic enamel paint (ordinary/ tint), not otherwise descri-bed, over 10cm width or girth on steel based surface.Make: (Apcolite of Asian paints, Dulux Gloss of ICI Paints, Goodlass of Nerolac) Shade as approved by EIC at the time of execution.

M&L for 3mm thick wall care putty on wall.( make: Birla, asian, JK)

M & L for taking down the Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) and remove to store.

M & L for taking down Chowkhats or frames exc. 1.5 sq. m each but n. Exc 4 sqmwith shutters (without taking off shutters from the frames in any position not otherwise described and remove to store.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, mitre cut at two corner and jointed with 2 nos. of 150 mm long brackets of 15 x 15 mm M.S. square tube of 19 gauges. The two vertical member to be reinforced with 19 x19 mm squre tube of 19 guage with suitable wooden batten inserted in the verticle MS tube for further enhance screw holding capacity. reinforced with M.S. Square tube, suppling & fixing in opening

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site.

S&F M.S. 100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed

S & F of 100.0mm Aluminium anodised, barrel tower bolts of extruded section and fixed.

S & F 100.0 mm ofAluminium handles, cast type, anodised

S/F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor size 150 mm.

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specifiedpowder coating of any colour (Thickness or powder coating not less than 50 micron).

S&F for powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron

S&F 5.5mm thick Sheet glass, ordinary quality, frosted on one side and glazing with oil putty in square exc 0.5 sq. m in each pane

S & F of Stainless Steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Cutting holes in brick walls exc. half brick but n. exc. one brick, built in cement mortar and making good to dismantled portion in cement concrete 1:2:4, Type B-1.

S&F of Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Removing building materials etc. to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination per load 0.62 cum.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15 mm dia

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20 mm dia

S&F GI tube 15 mm dia Tubes, 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. (make: jindal, Tata, Bhusan)

S&F GI tube 20 mm dia Tubes, 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors (make: jindal, Tata, Bhusan)

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixing in repair with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.(Make: Essco,kohler,Grohe)

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedfancy type, chromium plated15 mm bore dia.(Make: Essco,kohler, Grohe)

S & F OF 10 lit. PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. and connections to pipes and fixing of chain and pull, or lever, if any. (Make: Essco,kohler, Grohe)

S&F Tubular towel rail 20mm dia brass chromium plated.

S&F for brackets of brass chromium platedfix in tubular towel rail 20mm dia

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F 15 mm bore dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated fancy type.(Make: Essco,kohler,Grohe)

S/F of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding and making good to floor fixed in repair.(make: essco, hindware, parryware)

S & F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level fixing in repair.

S&F of Waste coupling of PTMT (half or full threaded, Dia 32 mm (Minimum weight 45gms), suitable for washbasin.

S & F of Vitreous China wash basin, white, flat back, size 550x400mm excluding ditto but including brackets, Wash basins, Fixing of Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, fixed in repair.(make: jaquar, kohler, grohe)

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail ®

S&F Self-closing taps, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed fixed in repair.(make: essco, kohler, grohe) 15MM SIZE.

S&F Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) bore dia of discharge pipe 32 mm

S&F Brass chromium plated shower rose 125mm sizewith or without swivel joints, including fixing to steel pipe or union. (make: essco, kohler, grohe)

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors(110mm)

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors (75mm)

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement ®(75mm)

S/F of PVC (SWR) 'P’ trap, size 110/110 mm. (make: supreme, prince, Kisan)

S/F of PVC(SWR) bends of any radius of size 75.0mm

S/F of PVC(SWR) bends of any radius of size 110 mm

S/F of PVC(SWR) Tee of any radius of size 75.0mm

S/F of PVC(SWR) Tee of any radius of size 110 mm

S/F of PVC (SWR) vent cowl, size 75 mm

M&L for concealled type wiring for one light point or one fan point or 5A plug point controlled by one switch with 1.5sqmm size copper cables in PVC conduit single core sheathed (Make Finolex/ Havells/ Standard/ Plaza).

M&L for 5A switch piano flush button single pole one way (Make Anchor/ Cona/ Havells/ Cabtree)

M&L for socket outlet 2 in 1, 5pin, 5 Amp (Make Anchor / Cabtree / Cona/ Havells)

M&L for socket outlet 2 in 1, 6 pin, 5 and 15amp flush type (Make Anchor / Cabtree / Cub)

S&F Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m

M&L for ceiling rose, PVC / polycarbonate, isolated body (Make Anchor/ Havells/ Indo Asian).

M&L for cutting chases, punning in making good to facing where require and pointing in cement morter 1:3 to ends or edges of landings, steps, chills, sunssades, selves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exc 10cm grith in brick wall.

S & F chrome plated gun hand shower (Health faucet) with 8-10 mm dia 1.2-1.5 meter long flexible tube and wall hook complete complete with desireable colour finsh Make: Jaquar,Kohlar, grohe

S & F SS Toilet paper holder fixed to walls with chromium plated (CP) brass screws.

S&F S.S Soap dish, any type, fixed to plugs with chromium plated brass screws

M&L for pvc flexible waste pipe minimum length 80 cm with inner thread adapter.

S&F of Hand dryer with automatic sensor start (touch free) power minimum 1800 w and support 200-240 v, wind temerature 55 c +/- 10 c induction distance 50mm-120 mm.

S&F Urinal partition of figured/frosted toghned figured glass size 900X450 mmand min 8 mm thick with brass chrome plated fittings for fixing of glass.(Make: jaquar, kohler, grohe)

S&F Vitreous China urinals, bowl type (flat back or corner wall type), complete including inbuilt spreader, waste and trap providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including Auto closing urinal flushvalve with wall flanges for flushing (cocealed type) grating and Union for discharge pipe with urinal spreader fixied in supply pipe and waste coupling minimum weight 50gms (Exclusive of fixing supply pipe to flushing cistern) fixed in repair.(Make; Jaquar, Kohler, grohe) mimimum size 385x325x635.

Wall mounted Water Closet english commode including P/S trap including of soft closing seat cover, rack bolts for fixing of product to wall, Concealed cistern with dual flusing 3/6 LPF inclusive of control plate. (Make: jaquar, Kohler, Grohe)

S&F of fancy light for wash basin mirror minimum 08 watts, compatible 200-240v.

S & F of High density polyethylene (HDPE) pipe 50mm in floor, wall and celing with clamps and nesessary fittings like Tee, elbow, socket etc complete.

Amarjit builders (BID ID -745045)

DAYAL ENTERPRISES (BID ID -744850)