Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAccepted-AOC | ₹1.2 Cr | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹1.3 Cr+₹9.4 L (7.87%)Rejected-Finance | ₹1.3 Cr+₹9.4 L (7.87%) | L2 | Rejected-Finance Not the lowest Bidder |
| 3 | L3₹1.3 Cr+₹13.2 L (11.0%)Rejected-Finance | ₹1.3 Cr+₹13.2 L (11.0%) | L3 | Rejected-Finance Not the lowest Bidder |
| Sl No | Description | Qty | Unit | M/s Balvinder Singh Engineer and Contractors L1 | Vinod Kumar Bajaj L2 | NAV DURGA CONSTRUCTION CO L3 |
|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkats or frames exc 1.5 sqm but not exc 4.00 Sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material to MES store complete all as specified and directed by Engineer-in-Charge. | 80 | Each | 125 ₹10,000 | 100 ₹8,000 Lowest | 150 ₹12,000 |
| 2.00 | Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material to MES store complete all as specified and directed by Engineer-in-Charge. | 490 | Each | 110 ₹53,900 | 100 ₹49,000 Lowest | 150 ₹73,500 |
| 3.00 | Taking down shutter of any description (wooden doors /steel jali doors) exc 1 sqm but n.exc 2sqm each & refixing the shutter in same/other opening including easing and adjusting complete all as specified and directed by Engineer-in-Charge. | 580 | Per Leaf | 150 ₹87,000 Lowest | 180 ₹1,04,400 | 250 ₹1,45,000 |
| 4.00 | Taking down shutter of any description exc 1 sqm but n.exc 2sqm each and removing taken down material to MES store complete all as specified and directed by Engineer-in-Charge. | 481 | Per Leaf | 20 ₹9,620 Lowest | 45 ₹21,645 | 100 ₹48,100 |
| 5.00 | Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material to MES store complete all as specified and directed by Engineer-in-Charge. | 200 | Each | 80 ₹16,000 | 70 ₹14,000 Lowest | 150 ₹30,000 |
| 6.00 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.
Note:-
(i) Density is not less than 650
(ii) Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same. | 950 | RM | 450 ₹4,27,500 Lowest | 525 ₹4,98,750 | 550 ₹5,22,500 |
| 7.00 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.
Note:-
(i) Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same. | 1,400 | RM | 780 ₹10,92,000 | 865 ₹12,11,000 | 750 ₹10,50,000 Lowest |
| 8.00 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.
Note:-
(i) Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same. | 500 | RM | 900 ₹4,50,000 Lowest | 980 ₹4,90,000 | 950 ₹4,75,000 |
| 9.00 | S&F steel frames of size 125 x 60mm made out of Precoated (galvalume sheet) 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge. | 750 | RM | 380 ₹2,85,000 Lowest | 450 ₹3,37,500 | 425 ₹3,18,750 |
| 10.00 | S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-charge.
Note : Stainless steel butt hinges shall be paid seperately. | 469 | Sqm | 3,898 ₹18,28,162 Lowest | 4,100 ₹19,22,900 | 4,150 ₹19,46,350 |
Tender Value
Refer Docs
EMD Value
₹1.9 L
Closing Date
23 Aug 2025, 6:00 pmClosed
HQ CWE SRI GANGANAGAR
HQ CWE POST BOX 48 SRI GANGANAGAR-335001 (Rajasthan)
REPAIR TO JOINERY, KITCHEN CABINETS, CUP BOARDS AND OTHER CONNECTED BR WORKS IN OTM AND MD ACCN UNDER AGE BR (M) AT FARIDKOT MIL STN
2025_MES_722750_1
CA NO CWE SGNR/TOKEN-32 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
GE FARIDKOT
AS PER NIT
8 documents required · 8 mandatory
₹1,000
GE FARIDKOT
₹1.9 L
Yes
10 Sept 2025
26 Jul 2025
25 Aug 2025
26 Jul 2025
23 Aug 2025
9 Aug 2025
Amount
Taking down chowkats or frames exc 1.5 sqm but not exc 4.00 Sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material to MES store complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material to MES store complete all as specified and directed by Engineer-in-Charge.
Taking down shutter of any description (wooden doors /steel jali doors) exc 1 sqm but n.exc 2sqm each & refixing the shutter in same/other opening including easing and adjusting complete all as specified and directed by Engineer-in-Charge.
Taking down shutter of any description exc 1 sqm but n.exc 2sqm each and removing taken down material to MES store complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material to MES store complete all as specified and directed by Engineer-in-Charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- (i) Density is not less than 650 (ii) Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- (i) Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- (i) Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same.
S&F steel frames of size 125 x 60mm made out of Precoated (galvalume sheet) 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge.
S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-charge. Note : Stainless steel butt hinges shall be paid seperately.
S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-charge. Note : Stainless steel butt hinges shall be paid seperately.
S&F factory made single extruded WPC (Wood polymer composite) solid decorative type wire mesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, Door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. (confirming to IS : 4020)all as per direction of Engineer-in-charge. Note : (a) stainless steel butt hinges shall be paid seperately (b) SS wire mesh and XTN aluminium mesh shall deemed to be incl in quoted rates.
S&F factory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-charge. Note : Stainless steel butt hinges shall be paid seperately.
S&F factory made single extruded WPC (Wood polymer composite) solid plain wire mesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, Door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. (confirming to IS : 4020)all as per direction of Engineer-in-charge. Note : (a) stainless steel butt hinges shall be paid seperately (b) SS wire mesh and XTN aluminium mesh shall deemed to be incl in quoted rates.
M&L for PCC 1:3:6, type C0 (using 12.5mm graded crushed stone aggregates) as in back filling of steel frames, bed blocks for fixing of hold fasts etc including necessary formwork complete all as specified and directed by Engineer-in-Charge.
S&F 100 mm long, Stainless Steel hinges with stainless steel steel screws complete all as specified and directed by Engineer-in-Charge.
S&F 140 mm floor door stopper of Stainless Steel body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed by Engineer-in-Charge.
S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repair 140 mm floor door stopper of Stainless Steel body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge.
S&F in repair Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed by Engineer-in-Charge.
S&F in repair Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed by Engineer-in-Charge.
S&F in repair 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repair 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
S & F in repair butt hinges medium weight cold rolled mild steel 100mm long in wooden/ steel/ iron frame complete all as specified and directed by Engineer-in-Charge.
S & F in repair aluminium die cast body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed by Engineer-in-Charge.
S&F sheet glass of 4.8mm, ordinary quality in area exc 0.5 Sqm in each pane in aluminium door/windows/fixed glazing incl necessary rubber beading complete all as specified and directed by Engineer-in-Charge.
S&F sheet glass of 3mm, ordinary quality in area n.exc 0.5 Sqm and glazing with oil putty / wooden beads complete all as specified and directed by Engineer-in-Charge.
S&F sheet glass of 4mm, ordinary quality in area n.exc 0.5 Sqm in each pane in aluminium door/windows/fixed glazing incl necessary rubber beading complete all as specified and directed by Engineer-in-Charge.
S&F 4mm thick Figured glass, pin head type and glazing with oil putty in steel frame and with rubber beading in aluminium frame in area n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-in-Charge.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/wooden beads/screw in wooden/ metal door and windows complete all as specified and directed by Engineer-in-Charge.
S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/wooden beads/screw in wooden/ metal door and windows complete all as specified and directed by Engr-inCharge.
M &L for welding in repairs n.exc 6mm thick metal and n. exc 5.00 cm in length complete all as specified and directed by Engineer-in-Charge.
Repair to steel gates of garages ( area n.exc 2.5 sqm) incl taking down for repair greesing, oiling, repair of hinges and pintals, changing of any part required for proper functioning of gate, welding if required and refixing gate complete all as specified and directed by Engineer-in-Charge. Note : (i) Any part of steel gate if required to be changed shall be measured and paid seperately under relevent item.
Repair to steel gates of garages ( area exc 2.5 sqm but n exc 5 sqm) incl taking down for repair greesing, oiling, repair of hinges and pintals, changing of any part required for proper functioning of gate, welding if required and refixing gate complete. Note : (i) Any part of steel gate if required to be changed shall be measured and paid seperately under relevent item.
S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work as gates, including pintle hinges, stops, hand-made sliding bolts, etc.con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
S&F 1mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new surfaces of iron works of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of approved colour over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
S&F in repair 25 mm dia Stainless steel curtain rod complete all as specified and directed by Engineer-in-Charge.
S&F Stainless steel bracket made from 25mm x 2.5 mm thick SS Flat suitable for fixing 25 mm dia curtain rod complete all as specified and directed by Engineer-in-Charge.
S&F Stainless steel end wall bracket suitable for fixing 25 mm dia curtain rod complete all as specified and directed by Engineer-in-Charge.
S&F Stainless steel finial suitable for 25mm dia curtain rod complete all as specified and directed by Engineer-in-Charge.
S&F in repair Steel rolling shutters, having thickness of laths 1mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material to MES store complete all as specified and directed by Engineer-in-Charge.
Repair to steel rolling shutter (size 5 sqm to 15 sqm) incl taking down for repair if required, greesing, oiling, changing of ball bearing, spring, gears or any other part required for proper functioning of shutter etc, welding if required and refixing shutter complete incl making good disturbed surfaces of wall matching adjoining wall finish complete all as specified and directed by Engineer-in-Charge. Note : (i) Any part of rolling shutter if required to be changed shall be measured and paid seperately under supply only rate. (ii) Small items/parts except item no shall deemed to be included in quoted rates of this item.
Supply only Ball bearing for rolling shutters complete all as specified and directed by Engineer-in-Charge.
Supply only bevel gear box, rod and crank handle complete all as specified and directed by Engineer-in-Charge.
Supply only spring for rolling shutter complete all as specified and directed by Engineer-in-Charge.
Supply only pully and shaft for rolling shutter complete all as specified and directed by Engineer-in-Charge.
Supply only sliding locks for rolling shutter complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new wooden or wood based or WPC surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of approved colour over one coat of primer complete all as specified and directed by Engineer-in-Charge.
M&L for taking down Aluminium door / windows & refixing the same after necessary adjustments and repair including providing necessary beading incl making good disturbed surfaces of wall matching adjoining wall finish complete all as specified and directed by Engineer-in-Charge. Note : (i) Rubber beading, screws, cleats etc if reqd shall deemed to be incl in quoted rates. (ii) Major defective parts like door closer, glass, hinges, alm sections etc shall be measured and paid seperately in relevant item.
S&F in repair Powder coated aluminium frame for doors / window / sliding window / door shutters with one or more rebates including joining cleat for fixing etc complete with minimum thickness of powder coating 50 micron all complete as per the direction of Engineer-in-charge.
M&L for providing and fixing stainless steel (Grade 304) in Window Grill made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the Grill with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size as Specified and Directed by Engr-in -Charge
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engineer-in-Charge.
S&F brass mortice lock, vertical type, size 100 mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified complete all as specified and directed by Engineer-in-Charge.
S&F 5.5 mm thick bevelled edge looking mirror of area n.exc 1.00 sqm fixed with 25mm stainless steel spacers complete all as specified and directed by Engineer-in-Charge.
S&F in repair Anodised aluminium snap grid frame work for false ceiling with Size of grid 605 x 605 mm. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer-in-Charge. Note : Quoted rates shall deemed to be included for taking down old false ceiling.
S&F in repair Exposed metal frame ceiling with 8mm thick laminated calcium silicate board for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed by Engineer-in-Charge. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) electric fittings and fixtures (if any) on the surface of ceiling.
Repair of suspended false ceiling by replacing GI hanger, re-alignment / levelling of existing snap grid ceiling framework etc complete all as specified and directed by Engineer-in-Charge. Note : (i) Cost of GI hangers/cleats/fasteners shall deemed to be included in quoted rates. (ii) Ceiling boards/Aluminium frame work if replaced shall be measured and paid in respective item.
S&F PVC hollow wall lining interlocking type of 5 to 7mm thick plain/coloured /wood grain fitted on wall with PVC rawl plug and steel screws including fillets / PVC 'L' / PVC 'U' joints as per manufacturer's instruction etc.complete all as specified and directed by Engineer-in-Charge. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) electric fittings and fixtures (if any) on the surface of wall
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed by Engineer-in-Charge.
S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.00 mm thick with girth of frame 185mm including MS rawls plugs and fixing 100mm long butt hinges, medium weight cold rolled mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed by Engineer-in-Charge.
S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.00mm thick, cut to size, holes punched and welded seams including bending or turning up all around, mitered angle, one number of locking arrangement as per Godrej pattern of equivalent, two numbers of handle and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed by Engineer-in-Charge. Note : (i) Measurement of door shutter shall be taken as exact size of cupboard opening (excluding frame and folded/ turned up portion). (ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engr-in-charge. cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/payment shall be made for the same.
Dismantling of unframed timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position complete all as specified and directed by Engineer-in-Charge.
Dismentling of boarding any description fixed in any position with nails complete all as specified and directed by Engineer-in-Charge.
M&L for 2nd class hard wood plain fillets,exc 6 Sqcm and not exc 13 Sqcm sectional area,square, rectangular or triangular in section, clean swan, secured with nails or brads ,put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.
M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work incl teak wood beading on edges complete all as specified and directed by Engineer-in-Charge.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type board of size 18-20 mm thick for kitchen cabinets, drawers, shelves and shutters etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of board and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-in-Charge.
S&F 30mm width continous (piano) hinges, mild steel, bright finish or electro galvanised fixed with screws complete all as specified and directed by Engineer-in-Charge.
S&F magnetic catcher suitable for wooden cabinets fixed with screws complete all as specified and directed by Engineer-in-Charge.
S&F Stainless Steel handle 100 mm size complete all as specified and directed by Engineer-in-Charge.
S&F 450 to 550 mm long, Stainless Steel telescopic channel complete all as specified and directed by Engineer-in-Charge.
Vinod Kumar Bajaj (BID ID -3395684)
NAV DURGA CONSTRUCTION CO (BID ID -3402832)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .