Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC | L1 | Accepted-AOC Being lowest bid. | |
| 2 | L2₹38.7 L+₹1.3 L (3.38%)Rejected-Finance D 55 HAKIKAT RAI RD ADARSH NAGAR DELHI 33 | L2 | Rejected-Finance Other than lowest bid. |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
6 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (South) Mamun
GE (South) Mamun Pathankot-145001
REPAIR TO JOINERY, GALVALUME ROOFING AND ALLIED WORKS IN OTM ACCN UNDER AGE B/R-I OF GE (SOUTH) MAMUN
2022_MES_550450_3
GE(S)/M-29/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (South) Mamun
As per NIT
8 documents required · 8 mandatory
₹500
GE (South) Mamun
₹70,000
Yes
20 Dec 2022
17 Nov 2022
13 Dec 2022
17 Nov 2022
6 Dec 2022
24 Nov 2022
Amount
M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, haunching, benching, kerbs , mud stops, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including existing PCC any type complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, including demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.
All as per srl item No 2.00 here-in-above but (EXCEPT BRICKS) complete all as specified and directed.
S&F "as in repair" solid PVC wall lining consisting of 5mm thick colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame 35mm x 5mm @300mm c/c vertile face top & bottom of wall & around opening with machine screw & rawl plug 38mm long complete all as per specifications and drawings.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling fixing on all corner and all around the opening complete all as per specifications and drawings.
S&F "as in repair" factory made 18mm (± 0.7mm) thick WPC sheet one side prelam for cupboard shutter of density 600 Kg/Cbm bent 90 degree and finish at all edges at level for making edge lipping/bending or 0.5mm thick PVC sheet lipping at 4 edges using bonding tape including dismantling existing wall and ceiling board etc complete all as per manufacturers specifications
Taking down existing aluminium door/window shutter and refixing to same opening after repairing, easing and adjusting including repalcement of damaged hinges, rubber neoprene packing, aluminium beading, glazing clips, handles etc and SS screws etc, complete all as specified and directed. Note:- Mortice lock, sheet glass, hydroulic door closer, floor spring and composit panel to be measured and paid separately.
M&L for resecuring or easing & adjusting existing wooden shuttes and fixed after complete repair of shutter exc. 1 Sqm but n. exc. 2 Sqm in same or other opening complete all as specified and directed.
S&F 40mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
S&F 35mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.
S&F 35mm thick H.D.F prelaminated (Wenga/Teak colour) moulded shutter 35 mm thick puf (poly urathane foam) insulation with minium density 40kg/cum filled in between two HDF sheets of thickness 3.2 mm both & border covered with 10 mm thick PVC sheet as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011
S&F 35mm thick Factory Made UV 3D printed flush door wood free consisting 5mm thick solid panel PVC sheet on both side (both side multicolour UV 3D printed) and consisting of frame made out of MS tube of 19mm guage thickness and size of 19mmx19mm for stiles as well as top , bottom and lock rail , the inside panel shall consist 25mm thick rigid solid PVC board having shutter density not less than 750Kg/Cum complete all as specified and directed.
M&L 35 mm thick single piece factory made wire gauge door shutter with and including 0.36mm nominal dia of wire and 1.40mm operture stainless steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG, size 19x19 mm complete in all respect with 160mm wide locking rail and 200mm wide bottom rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011
S&F factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows and other frame/chowkhat of size 45mmx70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxicc additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwedwith full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (edge), minimum compressive strength of 58 N/Sqmm, modulus of elasticity 900N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with and including 6mmx150mm long SS dash fastners complete all as specified and directed.
S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.
S&F 140mm long floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring, fixed in floor including vulcanised rubber complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised 30mm width of flaps (when open), complete all as specified and directed.
S&F 125mm size hasp and staple, safety type, aluminium with aluminium hinges pin including bolts to hinge plate and fixed with screws including hinge plate and fixed with screws complete all as specified and directed.
S&F 100mm long stainless steel designer handle bright finish fixed to drawers or cupboard shutters complete all as specified and directed.
S&F magnet ball catcher with 8mm ball and brass body and striking plate including latting in and fixed with cupboard shutter, complete all as specified and directed.
S&F 200mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.
S&F door closer hydraulically regulated, aluminium extruded section body, designation No. 1, universal type, suitable for door shutters upto 850mm in width and of weight not more than 35 kg complete all as specified and directed.
S&F "as in repair" double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.
S&F "as in repair" aluminium mortice lock 4-lever vertical type of 65mm size complete all as specified and directed.
S&F "as in repair" 20mm dia stainless steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type brackets, funnels etc suitable for single curtain rod, complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F "as in repair" 4.00mm thick aluminium composite panel for fixing to aluminium shutter and the like squares with aluminium beading and rubber gasket complete all as specified and directed.
S&F Powder coated aluminium anodised (minimum thickness of powder coating 50 micron) frame for door, window and ventilator 101.60mmx44.45mmx3.00mm with one or more rebates including jointing cleats for fixing etc and taking down existing aluminium frame complete all as specified and directed.
S&F Powder coated aluminium anodised door shutter, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, 2 Nos handles 150mm long in each door and two Nos 150mm long aluminium tower bolts in each shutter, SS hinges 125mm size-04 Nos, anonised aluminium snap beading, fixed with screws, complete all as specified and directed.
S&F powder coated anodised aluminium window and ventilator shutters, side hung or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges 100mm long (2 Nos) and suitable handles as required, complete all as specified and directed.
S&F Box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.
M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M&L Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in ridge/valley , gutter or straight flashings etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M&L plain, galvanised mild plain steel sheet 1.00mm thick as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with self tapping screws including dismantling of existing sheet as in valley/gutter etc complete all as specified and directed.
S&F "as in repair" 6mm thick non-asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts in small patches including dismantling of existing plain or corrugated sheeting, including Nainital or similar pattern roof coverings complete all as specified and directed.complete all as specified and directed.
All as per srl item no 44.00 here-in-above but (EXCEPT SHEETING) complete all as specified and directed.
S&F "as in repair 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including dismantling of existing plain galvanised mild steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M&L for closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed.
M&L for closing bolt holes or other similar holes in old Asbestos cement sheets by sealing with one bitumen and one plain G.I. washer on either side and 8mm dia bolt and nut, bolt not exceeding 25mm in length complete all as specified and directed.
M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surface including demolition of existing gola of any description complete all as specified and directed.
S&F False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or colour) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.
S&F "as in repair" (short quality) 4mm Non asbestos fibre cement building boards fixed in existing timber/GI/Aluminium framework with screws in ceiling, including preparation of new false ceiling surfaces and applying three coats of white wash including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.
M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for preparation of newly plastered surface of walls and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of old surfaces of walls of any description after complete removal of existing treatment and applying 2mm thick wall care putty for making the surfaces smooth and applying two coats of oil bound distemper, complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil bound distemper, complete all as specified and directed.
M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall/ceiling any description and making the surface smooth and applying two or more coats of Acrylic emulsion exterior paint having VOC less then 50gm/ltr and UV resistance as per IS-15489:2004 alkali and fungal resistance, dust resistance exterior paint of required shad (company depot tinted) with silicon additives @ 1.43 ltr/Sqm over and including priming coat of exterior paint applied @ 0.90kg/10Sqm complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads / clips, in square not exc 0.50 Sqm each pane, complete all as specified and directed.
S&F 4.8mm thick sheet glass, ordinary quality in square or rectangular fitted with aluminium beading and rubber gasket area exc, 0.5 Sqm in each pane complete all as specified and directed.
M&L for preparation of old surfaces of wood & wooden of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of newly wood & wooden based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of pink primer complete all as specified and directed.
M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
S&F "as in repair" 110mm bore PVC (SWR) rain water pipes, single socketed, in any length with rubber ring joints, laid or fixed to walls, including stack clamps made out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed.
S&F "as in repair" 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.
Repair to steel door of built in locker with attached shoe rack by easening and adjusting, welding/repairing (if required) and replacement of mortice lock, handle cast brass 100mm size, repair to verticle rod (where required), locking arrangement including replacement of mortice lock, handle, cover plate (where required) including preparing old steel surface and applying a coat of synthetic enamel paint complete all as specified and directed. Note:- Mortice lock, cover plate and handle shall be measured and pair under respsctive item of supply only.
Supply only locks, cupboard, grade I, 2 lever size 65mm complete all as specified and directed.
Supply only 100mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed.
Supply only cover plate 1mm thick MS sheet of size 125mmx250mm including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.
Dismantling timber scantling 40 Sqm and over in section in unframed work etc complete all as specified and directed.
GARG CONSTRUCTION CO
Bidder Name
GARG CONSTRUCTION CO
M/s Ashoka Brothers
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .