ADDN/ ALTN TO ROSSIE A AND B ACCN AND PROVN OF DRAIN NEAR CASTLE 13 (SO MD ACCN) AT DSSC WELLINGTON

Dismantling of single layer mangalore pattern roofing tiles all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and as directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

Taking down shutter of any description area exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

Excavating in trenches, n.exc 1.5m wide and n exc 1.5 in depth; for foundation getting out hard/dense soil.

Dismantling of floor hearth or wall tiling including cement mortor bedding(but not backing) complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grill,rail etc all as specified and as directed.

Demolition Concrete of any description and in any position not otherwise specifically provided for drain, etc all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in unframed work such as rafter,beam etc complete all as specified and as directed.

M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.

M&L for approved earth filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface all as specified and as directed

M&L Light shade coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L 75mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in Sub base floor finished even and fair etc all as specified and as directed.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed

Demolition of cement concrete n exc 15 cm (unreinforced ) (below or above ground level) and removing debris off the site complete all as specified and as directed.

S&F second class hardwood plain,solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, groove for fixing of glass etc complete all as specified and as directed.

All as per item No 19 above but set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick backing coat in CM 1:4 complete all as specified and as directed

UPVC windows : Factory made UPVC white Bay windows with glazing all as per manufacturer's direction and following specifications :- (i) Front window panel shall be sliding patern with 2.5 track frame with upvc profile section of size 95mmx 54mm having outer wall thickness of 2mm(+/- 0.3mm ) with sliding pattern with glazed and mesh shutter and side and top side window panel shall be fixed pattern with appropriate frame section of 60x 42mm with glazed shutter with plain/pin head glass panes of 5 to 5.5mm thick . (ii) window glass shutter for (front panel )shall be made of 66mmx 42.5mm having outer wall thickness of 2.0mm(+/- 0.3mm) and window glass shutter for side fixed pattern shall be made of appropriate section with 52mmx 22mm. (i

ii) Window mesh shutter shall be made of 52mm x 22mm.Gauge shall be suitable wire gauge SS304 coated/fiber black mesh. (iv) All profile of frames and sash shall be reinforced with galvanised mild steel section of 1mm wall thickness at wherever required. (v) All the corners and joints of the frame shall be mitred cut & fusion welded without any mechanical joints. All welded joints are to be neatly trimmed & features grooved /raised nib finish so as to make the finished products free from all sharp edges & burrs. (vi) The lock shall be single point touch lock. All hardware like wheel, lock should be screwed .System shall be provided with suitable UPVC beading size of 25mm x15.5mm for glazing of size 4mm/5mm pinhead /plain glass as directed by the Engineer In charge. (vii) The profiles shall be cut to length and welded 45 degrees . (iii) The complete window shall be fixed into the prefinished opened place by drilling & fixing through the outer frame using high quality fasteners & silicon sealant is applied to fill up the gap between wall & window frame for leak proof installation and completion. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge. (II) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose.

UPVC windows : Factory made UPVC white sliding windows with glazing all as per manufacturer's direction and following specifications :- (i) Window panel shall be 2.5 track frame with UPVC profile section of size 95mmx 54mm having outer wall thickness of 2mm(+/- 0.3mm ) with sliding pattern with glazed and mesh shutter. (ii) Window glass shutter for (front panel)shall be made of 66mmx 42.5mm having outer wall thickness of 2.0mm(+/- 0.3mm) . (iii) Window mesh shutter shall be made of 52mm x 22mm.Gauge shall be suitable wire gauge SS304 coated/fiber black mesh. (iv) All profile of frames and sash shall be reinforced with galvanised mild steel section of 1mm wall thickness at wherever required. (v) All the corners and joints of the frame shall be mitred cut & fusion welded without any mechanical joints. All welded joints are to be neatly trimmed & features grooved /raised nib finish so as to make the finished products free from all sharp edges & burrs. (vi) The lock shall be single point touch lock. All hardware like wheel, lock should be screwed .System shall be provided with suitable UPVC beading size of 25mm x15.5mm for glazing of size 4mm/5mm pinhead /plain glass as directed by the Engineer In charge. (vii) The profiles shall be cut to length and welded 45 degrees . (iii) The complete window shall be fixed into the prefinished opened place by drilling & fixing through the outer frame using high quality fasteners & silicon sealant is applied to fill up the gap between wall & window frame for leak proof installation and completion. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge. (II) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose.

M&L for 2nd class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and as directed..

M&L for 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6 mm thick lipping patty around the shutter complete all as specified and as directed.

M& L for UPVC ventilator with The profile for construction of UPVC ventilator frame will be of overall size 60x58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. The corners will be plastic welded. The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. The ventilator will be fixed to walls using 8 mm dia 80 mm dia MS screws minimum 2 nos on each side. The 3 nos of pinned glass will be placed in slots provided in ventilator. Glazing: The ventilator will be glazed with 5 mm thick pinhead glass. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge. (II) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose.

Supply and fix UPVC panel door shutters with frames with approved make and section and colour with all necessary fixtures like hinges, handles, bolts etc all as specified and as directed.the detailed specification as follows. (i) Door frame shall be upvc profile section of size of 60mm x 60mm wall thickness of 2mm(+/- 0.3mm ) with openable pattern.) (ii) Door shutter with sash made of 80mm x60mm and panel shall be 10 to15mm thick(+/- 0.3mm ) .All profile of frames and sash shall be reinforced with galvanised mild steel section of 1mm wall thickness at wherever required. (iii)All the corners and joints of the frame shall be mitred cut & fusion welded without any mechanical joints.All welded joints are to be neatly trimmed & features grooved /raised nib finish so as to make the finished products free from all sharp edges & burrs. (vi)The profiles shall be cut to lenth and welded 45 degrees

S&F Stainless steel wire cloth0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F Mild steel butt hinges 100mm long, medium weight, cold rolled all as specified and as directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F 150mm, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

M&L for Providing Gypsum board False ceiling using 12mm thick Gypsum board panels of size as approved by GE, fixed with staples on powder coated standard galvanized iron snap grid frame work of size suitable to fixing Gypsum board using 'T' and angle sections made out of 0.5mm thick PGI sheet, grade of zinc coating 220, bent to shape required as in main member, secondary member, perimeter angle section including provn of G I channel suspender fixed to roof members at the rate of 1200mm c/c and interspaced at 610mm c/c, the main fixing channel shall be fixed through fasteners clips as per manufacturer's instructions with and including plaster of Paris decorative type cornice all around at the junction of wall and ceiling including taking down and refixing of electrical fittings etc., complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include the cost of taking down and refixing of the electrical fittings such as ceiling fan, light fittings etc., and keep in safe custody of same till refixing.

M&L for Preparing of gypsum board false ceiling with primer and applying 1.5 mm thick wall care putty and applying two coat of OBD over one coat of primer complete all as manufacturer instructions and as directed

S&F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and Fix non asbestos fibre cement building boards 6mm thick including necessary GI/ Aluminium frame work with necessary suspenders as in ceiling complete all as specified and as directed.

M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in plinth protection etc. finished even & fair without using extra cement complete as specified and as directed.

Supply and fix in repair18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom warbdrops fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed. Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra.

S&F 9/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixed with hidden screws to steel/wooden frame work complete all as specified and as directed.

M & L for mild steel work as in tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in drain / surface channel all as specified and as directed.

M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete all as specified and as directed. .

Supply and fixing 0.60mm Galvanised,plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and as directed.

M&L for roof tile, Mangalore pattern, interlocking at side joints, laid dry all as specified and as directed

Fixing only for roof tile, Mangalore pattern, interlocking at side joints, laid dry all as specified and as directed

S & F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet crumped where ever required 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings fixed with self tapping screws complete all as specified and as directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,barge board etc fixed with self tapping screws as specifiedcomplete all as specified and as directed.

Material and labour for 15mm thickl Rendering in Cement Mortar 1:6, on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth complete all as specified and as directed..

Material and labour for rendering15mm thick(base layer 10mm thick and top layer 5mm thick) in Cement Mortar 1:4 and top 5mm thick shall be mixed with liquid water proofing compound as per manufacturers' instructionson stone masonry surfaces of wall, finished even and fair complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound of approved make complete all as specified and as directed.

Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

M/L preparing new surface of steel and appling two coats of synthetic enamel paint over a coat of primer red oxide all as specified and as directed.

S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

Supply and fixing 0.60mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 all as specified and as directed.

S&F in repair Central hole basin mixer with out popup waste system with 450mm long braided hoses Cat No - G4715A1 of Parryware/ F730009 of Hindware/ CON-169KNB of Jaquar all as specified and as directed.

S&F in repair wall mixer 3-in-1 system with provision for both hand shower and OH shower complete with 115mm long bend pipe, connecting legs & Wall Flange (without hand & over head shower)Make: Cat No G4617A1 of Parryware/ F730022 of Hindware / CON -281KN of Jaquar all as specified and as directed.

S&F in repair over head shower 200 mmx200mm including shower arm 20mm dia & 375 mm long round shape with 90 ° bend for wall mounted showers of with flange of Make: Cat No T9975A1,T-9802A1 of Parryware / F160142,F160024 of Hindware/ OHS-CHR-1619,SHA-479L450 of Jaquar or equivalent all as specified and as directed. .

Supply and fix stainless steel tubular towel rack 600mm long without lower hangers but with three hooks, Chromium plated as per Cat No.ACN-1181FHS of Jaquar or T6008A1 of Parryware or of other specified makes fixed on walls complete all as specified and as directed. .

Supply and fix in repairs Angular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS as per Cat No.CON-053KN of Jaquar or G3053A1 of Parryware, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fix in repairs two way Bib cock 15 mm bore, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to IS as per Cat No.CON-041 of Jaquar or T3534A1 of Parryware or specified makes, screwed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed.

S&F two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed..

S&F in repairs 5.50mm thick looking mirror of size 24"x 18" frameless SDG mirror with beveled edge , fixed to with chromium plated brass screws on wall or tiled surface etc all as specified and as directed.

S & F in repair Single lever sink mixer with swinging spout, wall mounted model with connecting legs and wall flanges complete all as spd and directed Make- Cat No G3335A1 of Parryware/Cat No F320027 of Hindware/Cat No DRC-37165 of Jaquar or equivalent all as specified and as directed..

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall etc complete all as specified and as directed.

Supply and fix stainless steel handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

Supply and fix Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2

S& F in repair Vitreous china Wash Hand Basin, White, wall hung half padestal type of size 510x410x160mm including 32mm waste coupling, 32mm dia waste pipe750mm long etc.

,) .Make : CERA ,Cat part No : S2040136 all as specified and as directed.

Supply and fix stainless steel telescopic ball bearing channel, zinc plated finish for drawer including necessary fittings up to length of 600mm fixed with screws complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking platforms etc for even and smooth finish complete all as specified and as directed

M/L for 2 coats of synthetic enamel painting over a coat of red oxide primer on steel surface exc 10 cm width or grith including preparation all as specified and as directed..

Demolition of reinforced Cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for RCC Type B1-1:2:4 (using 20mm graded aggregate) as in slab supproted on walls, beam and columns in floor, roof/cooking platforms etc

Material and labour for RCC type B-1 (1:2:4) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed.

M&L for preparation of old mangalore pattern tile surfaces and appying two coats of tile guard over one coat of primer all as specified and as directed.

M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:4) complete all as specified and as directed.

) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed.

S&F stainless steel kitchen baskets(SS-304) of size 544mm x505mmx200mm complete all as specified and as directed.Make :EBCO cat No: RA-BCCS1-21-20-8 or equivalent in HETTICH/KAFF/GODREJ

S&F stainless steel kitchen baskets(SS-304) of size 544mm x505mmx100mm complete all as specified and as directed.Make :EBCO cat No: RA-BCCS1-21-20-4-CT or equivalent in HETTICH/KAFF/GODREJ

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L Preparing newly plastered surfaces of external walls and applying exterior wall putty of 3mm thick for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger complete all as per manufacturer instruction as directed.

S&F TMT Mild steel bars 5mm dia and overbut 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying exterior wall putty of 3mm thick for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger complete all as per manufacturer instruction all as specified and as directed.: NOTE: The painting work to be executed by authorised applicator of the manufacturer

S&F stainless steel kitchen baskets(SS-304) of size 530mm x505mmx200mm complete all as specified and as directed.Make :EBCO cat No: RA-21-20-8 or equivalent in HETTICH/KAFF/GODREJ

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and as directed.

Disconnect and taking down existing exhaust fan of size 250mm sweep or 300 mm sweep with louver and hand over to MES store yard for safe custody.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of wall and applying with white putty of average thickness 1.5mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of alkali resistant primer by approved applicator of the manufacturer of the paint and all as specified and as directed.

Fixing only exhaust fan PVC 250 mm sweep/metal 300 mm sweep and connecting up including cleaning and painting with white enamel paint one coat and provision of cable from ceiling rose/connector to fan complete all as specified and as directed.

Disconnect and taking down the existing energy meters, cleaning and deposit to BSO in good condintion as directed by Engr-in-Charge and stickering the name of the corresponding Qtr No and refixing the same complete all as specified and as directed.

M&L for preparation of new surfaces of walls and applying with white putty of average thickness 1.5mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of alkali resistant primer by approved applicator of the manufacturer of the paint and all as specified and as directed.

All as per Item No-100 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm 3 pin socket outlet, for independent complete all as specified and as directed.

S&F Modular type Socket outlet 6 Amps 2/3 Pin, 2 module complete all as specified and as directed.

S&F Modular type switch single pole 16 Amps one way, 1 module all as specified and as directed.

S&F Modular type socket out let 2/3 pin, 6/16 Amps, 2 module all as specified and as directed.

S&F Modular type switch single pole 6 Amps, 1 module, one way all as specified and as directed.

S&F Call Bell, AC, ding dong type 230 Volt complete all as specified and as directed. .

S&F Modular type Bell switch single pole 6 Amps one way, one module all as specified and as directed.

S&F ceiling rose surface mount PVC/Polycarbonate, isolated body with face bakelite two/three terminals complete all as specified and as directed.

S&F modular white cover plate with frame, 3 module complete all as specified and as directed.

S&F modular white cover plate with frame, 4 module complete all as specified and as directed.

M&L for Coaxial TV cable,RG-6 with less signal losses incl necessary items complete all as specified and as directed. by .

S&F modular white cover plate with frame, 6 module complete all as specified and as directed.

S&F TV coaxial socket,1 module complete all as specified and as directed.

S&F internet socket RJ-45, suitable for CAT 6 cable ,sheilded, folded metal 1 module complete all as specified and as directed.

S&F 25 mm dia aluminium coated design curtain rod antique finish fixed to double bracket matching with curtain rods including taking down old GI curtain rods all as specified and as directed.

S&F in repair LED street light /security light luminaries fitting 1X30 watt LED with min 120 lumens/watt output including GI bracket made out of GI pipe light grade 25 mm dia 1.20 m long bent to shape with suitable size mild steel clamps of size 50 X 6mm with nut, bolt, & washers as required at site for fixing of street light on LT poles / wall including making connection with PVC insulated 3 single core of 1.5 sqmm size multistranded copper conductor cable complete all as specified and as directed.

Labour only for Refixing the serviceable Geyser in the same or different original position/location making the electrical connection, testing after installation complete all as specified and as directed.

All as per item No 100 above but One 5 amps 3 Pin socket outlet on independent board

Supply and fixing LED lights fitting 1x 20W, 220V, AC , (4 ft.) High performance electronic driver , operating temperature 10 C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 Im/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make Havells cat part No : LUMILINEPLUSPROBS20WLED865SPCSSIND OUG G

S & F Triple pole and neutral, 6 Way DB,IP43, IK09, Metal double door type 415 volts fitted with 200 Amps Rated busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed.

Supply and fixing LED lights fitting 1x 10W, 220V, AC , (2 ft.) High performance electronic driver , operating temperature 10° C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 lm/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make Havells cat part No LUMILINEPLUSPROBS10WLED865SPCWHIND or equivelent

S & F SPN DB, 12 Way, Metal double door type 240 volts fitted with 200 Amps rated busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed.

S&F MCCB, 4 pole,63 A rating (Ics=100% of Icu),415Volts,16 kA Breaking capacity with adjustable overload & adjustable Short circuit setting thermal magnetic release complete all as specified and as directed & as directed.

M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in lintels up to 1.5 m clear span, cills, steps, seismic and other similar brands plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water roughs and like including weathering, slightly rounded or chamfored angles and throating complete all as specified and as directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for rough finished complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick backing coat in CM 1:4 complete all as specified and as directed

S & F SPN DB, 08 Way, Metal double door type 240 volts fitted with 200 Amps rated busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed.

Taking down old sub-main wiring incl fixture & fittings etc. and M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) sq. mm + (1 x 4.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified and as directed.

M&L 10mm thick rendering plaster on fair face of brick-work or concrete surface incl finish the surface even and smooth with using extra cement in CM 1:4 complete all as specified and as directed. .

Material and labour for providing plain cement concrete 1:4:8 type D2, using( 40mm graded stone aggregate )as in foundation filling and mass concrete for manhole&Septic tank all as specified and as directed.

M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, sunken floor sub bse etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete as in hard /dense soil all as specified and as directed.