ADDITION ALTERATION AND SPECIAL REPAIRS TO TECHNICAL BUILDING AT ELSEC CAMPUS UNDER GE I RND RCI HYDERABAD

Amount

Taking down cement lime plaster on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete and removing rubbish of the premises all as specified and directed.

Demolition of cement concrete in any description and in any position not otherwise specifically provided for and removing debris of the premises complete all as specified and as directed.

Demolition of Brick work /stone masonry built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

Taking down rain water pipe of any dia fixed to wall includings all fittings, heads, shoes, bends swan necks etc complete all as specified and as directed.

Taking down door chowkhats or frames with shutter (without taking out shutter from frame ) area not exc 1.50 sqm complete all as specified and as directed.

-ditto- all as per item No .5 above but exc 1.50 sqm but not exc 4.00 Sqm complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and resecuring or easing and re-fixing in the same position complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M & L for brick work using locally available first class bricks sub class 'B' bricks (old size brick), straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 half brick thick wall complete all as specified and as directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces in Cement Mortar 1:4, mixing with WPC as per Manufacturer’s Instructions and finished surfaces even and smooth without using extra cement, complete all as specified and as directed. Note : WPC shall be measured and paid separately.

M&L for rendering 15 mm thick on fair faces of brick surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in ceiling of conctrete surfaces in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed.

M&L for Vitrified ceramic tiles dark shade/double charged 8 to 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and as directed.

M & L for vitrified ceramic tiles dark shade/double charged 08 to 10mm thick as in skirting/dado etc to match the length of floor tile including 10 mm thick screed bed in cement mortar 1:4 set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe surfaces over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L for nonskid joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 Sqm, of approved colour any print/design in floor etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces, over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L for nonskid joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 Sqm, of approved colour any print/design in skirting etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces laid over and including plastering of 10mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed ceramic joint free tiles in vertical surfaces 350 x250 x7mm/450x350x7mm thick of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces over and including backing 10mm thick in CM 1:4 complete all as specified and as directed.

M&L PCC type B0 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in flooring complete all as specified and as directed.

M&L 75 mm thick PCC type C2 1:3:6 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including filling the joints with sealing compound grade 'A' complete all as specified and as directed.

Dismantling of wall and ceiling board (fibre, pulp insulation etc) for insulation board/slab/blankets any thickness including cover fillet complete all as specified and as directed.

S&F mineral fibre acoustical suspended ceiling system with Mina Tuff (Micro look) edge tiles with silhouette exposed grid. The tiles shall have humidity resistance (RH) of 99%, NRC upto 0.6, light reflectance 88%. Thermal conductivity K=0.052-0.57 w/m K, colour white, fire performance Class-I (BS476 Part 6 & 7) in module size of 600 x 600 x 16mm with bio black coating on the face of the tile, impact resistant and suitable for green building application with recycled content of 63%, Tile shall be laid on silhouette profile grid and with a web height of system with 15mm white/black colour and with a web height of 38mm and having load carrying capacity of minimum 11.68 Kgs/Sqm, silhouette, main runner and cross tees to have mitred ends and birds mouth notches shall be provided mitred cruciform junction complete all as specified and directed.

S&F aluminium powder coated door frame of size 101.60 x 44.45 x 2.50mm of approved manufacturer fixed to floor, wall with rawl plug and screws and fixing door shutter with frame of anodized aluminium powder coated (including mortice lock, door handle, tower bolt, hinges and tinted transperent coloured glass pane not less than 5 mm thick fixed with rubber gasket / prelaminated particle board , exterior grade, 12mm thick, prelaminated both side with decorative choice laminations and aluminium beading / glazing clips of size 19.00 x 17.30 x 0.70mm (Weight 0.097 Kg/RM both side shutters) with Top lock rail and vertical member of size 83.50x44.45.x 2.30mm and bottom member of size 114.30 x 44.45 x 2.30mm complete all as specified and directed.

S&F aluminium anodised window frame of size 61.85 x 31.75 x 1.50mm or necessary section of approved manufacturer fixed to floor/wall with rawal plugs and screws and fixing openable/sliding double window shutters with anodized aluminium window frame (including handle, tower bolt, hinges) and tinted transparent coloured glass pane not less than 5mm thick fixed with rubber gasket fibre and aluminium beading/glazing clip of suitable size both side shutters with top rail, bottom rail and vertical member of size 40x18x1.55mm of approved make including cost of Deco grill design size DG-202 complete all as specified and directed.

S&F Aluminium partition (area not exceeding 1.5 Sqm each panel) with frame of size 63mm x 38mm x 2mm thick, fixed with hold fasts including snap beading rubber gasket etc., complete all as specified and as directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane including hacking out old broken glass complete all as specified and directed.

S&F Figured glass, 5mm thick pin head type and glazing with oil putty or aluminium beading in squares in exc 0.5 sq.m in each pane including hacking out old broken glass complete all as spepcified and directed.

S&F solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and as directed.

M&L prelaminated particle board , exterior grade, 12mm thick, prelaminated both side with decorative choice lamination fixed to aluminium frame work complete all as specified and as directed.

S&F vertical type venetion blinds of approved colour using 100mm wide fabric blinds including operation chords, threads, counter nut, connection chain, necessary fittings including taking down complete all as specified and as directed. Make : AMAR/MAC/Any other approved make of Command/ADG.

S&F factory made solid panelled PVC door shutter 30 mm thick ( style) consisting of MS frame made out of MS tubes for top and bottom rail .MS frame shall be covered with heat moulded plain colour PVC (C ) channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixed to chowkhats as per manufacturer instruction complete all as specified and as directed.

S&F PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplied and fixed as per manufacturer instruction complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolt with hasp and staple ( bolt type) and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy 200mm long complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolt with hasp and staple ( bolt type) and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy 300mm long complete all as specified and as directed.

S&F extruded aluminium handle fabricated type 100 mm size complete all as specified and as directed.

S&F extruded aluminium handle fabricated type 150 mm size complete all as specified and as directed.

S & F 100 mm size, butt hinges, stainless steel including cadmium coated screws complete all as specified and directed.

S&F of door closer hydraulically regulated aluminium (Die cast) body designation No 3 universal type suitable for door shutter of weight between 61 to 80Kg of approved make having ISI mark fixed in repairs complete all as specified and as directed. Make LEVERITE/KELVIN/Any other make approved by ADG/Command

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors includind taking down and refixing & also fixed in repairs complete all as specified and as directed. Make Sandhu/Samrat/Any other make approved by ADG/Command

S&F for Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, including taking out old damaged gates complete all as specified and as directed.

S&F of rotational moulded polyethylene water storage tank 1000 ltrs capacity (Cylindrical vertical with closed tip) hoisted and fixed in position all as specified in SSR Part I ) complete all as specified and as directed.

Disconnecting existing tanks exc 1000 n.exc 2000 ltrs capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc complete all as specified and as directed.

Dismantling water tanks exc 1000 & n exc 2000 ltr capacity complete all as specified and as directed.

S&F in repair of gun metal globe or gate valves 25 mm dia bore pipe with wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

Taking up or down 15 mm dia steel tubing including connections complete all as specified and as directed.

Taking up or down 20 mm dia steel tubing including connections complete all as specified and as directed.

Taking up or down 25mm dia steel tubing including connections complete all as specified and as directed.

S&F tubes medium grade 15 mm size galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F tubes medium grade 20 mm size galvanised with all fittings and fixed complete to walls and ceiling or laid in trenches complete all as specified and as directed.

S&F tubes medium grade 25 mm size galvanised with all fittings and fixed complete to walls and cealing or laid in trenches complete all as specified and as directed.

S&F of ball valves 25mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete screwed for iron pipe and fixed complete all as specified and as directed.

S&F of 10 ltrs capacity PVC flushing cistern low level of approved colour complete all as directed fixed in repairs complete all as specified and as directed.

S&Fof vitreous china white flat back urinal half stall type including CP waste fitting,PVC waste pipe CP brass connecting pipe, complete all as specified and as directed.

S& F CP Brass towel ring of approved quality fixed in repairs complete all as specified and as directed.

S&F of CP brass urinal speeder of appoved quality for urinal complete all as specified and as directed.

S&F 15mm bore Bib taps/two in one bib taps fancy type , chromium plated, cast copper alloy with crutch capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and as directed.

S&F PVC connection 15mm dia 600mm long with PTMT nuts at both ends fixed in repairs complete all as specified and as directed.

S&F Pillar taps, brass, with capstan heads, chromium plated, fancy type, 15mm bore of pipe, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair, complete all as specified and directed.

S&F Stop valves,15mm dia bore cast copper alloy,fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed in repair, complete all as specified and directed.

S&F hand shower (health faucet) with 8mm dia 1.20 Mtr long flexible tube and wall hook ,CP fixed in repairs complete all as specified and as directed. (Make - Jaquor, Cat No.ALD-573) or equivalent model in Parryware/Hindware

Cutting chases in brick walls for concealed water tubing and making good in CM 1:3 cutting n. exc 10 cm girth complete all as specified and as directed.

S&F in repair of wash hand basin white vitreous china 550X400 mm including necessary CP waste fitting, waste pipe complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) white excluding flushing cistern and flush pipe including plastic seat cover black closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair vitreous china white squatting Orissa pattern size 630 x 450 mm with integral foot rest complete all as specified and directed.

S&F PVC/SWR pipe 110 mm bore single socketed in any length with rubber ring joints fixed to wall including necessary clamps, etc complete all as specified and as directed.

S&F in repair PVC/SWR, junction single, Single T equal or unequal 110mm dia with access door bend.

S&F PVC/SWR bends with door bends for 110mm dia complete all as specified and as directed.

Material and labour for roof treatment as follows :- (a) Material and labours chipout the existing loosened bitumen/bitumen mambrane completely reachup mother slab, clean the surface thoroughly to make it smooth and clean of any foreign materials repair the concrete where ever damaged using PMM HS repair, repairing of construction Joints/cracks/chasing with machine and filled the same with polymerised mortar in HS repair,coping of 75 x 75mm should be made at the junction of wall and raft slab using polymerised cement mortar 1:4 add mixed with advance latex plus. (b) Applying one coat of 50% diluted self priming PU roof coat. Allow to dry priming coat for 4 to 6 hours before applying PU coats and surface to be cleaned before applying PU coats. (c) Applying two coats of single components cold applied, water based poly urithene modified acrylic dispersion with highly elastic and UV registant water proofing treatment to the roof with HS PU roof at 0.6 kg/sqm for each coat without dilusion confirming to ASTM D 6083-97a (Standard specification for liquid applied acrylic coating using in roofing) each coat should be allowed to dry 4 to 6 hours the components shall have a density of 1.5 to 1.3 kg/ltr having tensile strength of 1.5N/mm2 having elongation of 350% with solid content 60% in two coats. SRI value should be more than 100. The quoted rate shall include surface preparation, repairing the cracks in mother slab by chasing with cutting machine and filled the same with polymerized mortar in CM 1:4 admixed with latex agent of reputed manufacturers, making coving at junction, bore packing, treatment of construction joints completely as per manufacturers specification and direction of the Engineer-in-Charge.

Note:- The above treatmenet shall be got carried out by the authorised applicator of the manufacturer approved by the Garrison Engineer. Make : Bostik / Berger/ Fosroc/ Sika/ Asian or any other make approved by E-in-C's Branch for PU based water proofing treatment

M&L hydraulically pressed burnt clay tiles plain of size 200 x 200 x 19/20 mm thick mamchine laid over existing roof treatment and including cement mortar screed 15mm thick in CM 1:4 mixed with water proofing compound minimum 3% by weight of cement complete and jointed/pointed in CM 1:3 complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in padding, coping, platform for water tank, kerb, coving etc on roofslab to maintain proper slope complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of walls and applying two coat of oil bound distemper as per specification complete all as specified and as directed.

M&L, preparation of old plastered surfaces on ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls/ceiling and applying two coats of exterior emulsion paint over a coat of primer including removal of existing treatment on wall/ ceiling surfaces including cornices, pilasters etc by scrapping down with wire brushes and removing existing loose finishes, particles etc complete all as specified and as directed. (Make/Brand Name : Asian paints/Apex ultima, Berger paints/weather coat all guard. all as specified and directed.

M&L preparation of new surfaces of wall including cornices pillaster etc and applying two coats of oil bound distemper over a coat of alkali resistance primer as per specification complete all as specified and as directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm over new surfaces, complete all as specified and as directed.

M&L, preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

M&L preparation of old wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old polished wooden surface of any description not otherwise described over 10cm width or girth and polishing with one or more coats of french polish complete all as specified and directed

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 mtr depth for laying cable at and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25cm., complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 Mtr and deposited at a level not exceeding 1.5 mtr above from the starting point complete all as specified and as directed.

Removing excavated soil material to a distance exceeding 250m but not exc. 500m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed.

Supply and spread river sand in trenches for cable cushioning including watering and consolidation all as specified Note : For the purpose of payment punned thickness only will be measured complete all as specified and as directed.

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

S&Fin repairs 40mm dia GI pipe light grade fixed to walls/poles or laid in trenches, road crossing etc., for protection of underground cable/earth strip including sealing ends with hessian cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed on walls/poles complete all as specified and directed.

M&L for cutting of existing bituminous/PCC road or flooring/plinth protection laying of GI pipe in intersection for passing of LT XLPE cable including excavation in any type of soil returning filling in and making good top 30 cm of the trench by providing PCC 1:2:4 typ-e B1 using 20mm graded stone aggregate to flush with existing road surface complete all as specified and as directed.

Dismantling stone slab & tiles laid bedded and jointed in cement mortar complete all as specified and as directed.

M&L of Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing, edge moulding and anti skid lines 02 Nos complete and including screed bed 20mm thick in CM 1:6 complete all as specified and as directed.

M&L for 18 to 20mm thick Granite (of any type) machine cut, as in skirting/dado/riser laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including plastering of 10mm thick in CM 1:4 complete all as specified and as directed.

Excavation over areas n.exc 1.50 m deep and getting out in hard/dense soil, complete all as specified and directed.

M&L for PCC (1:4:8) cement concrete type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

Supply only water proofing compound.

M&L for RCC Design mix M-25 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M&L for RCC Design mix M-25 as in column, pillars pier, post and struts etc complete all as specified and directed.

M&L RCC Design mix M-25 as in slab supported on wall, beam column etc complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over, outo and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed.

M&L for mild steel TMT bars 8 to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooking for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work ; rough finished vertical or to batter,complete all as specified and as directed.

Formwork to soffit of suspended slab such as roof slab fair finished complete all as specified and as directed.

Frame work as in post of angle with gusset plate rails braces etc conforming to Fe-410 grade E-250 complete all as specified and directed.

S&F Rotational moulded polythylene water storage tank 10000 litres capacity (cylindrical vertical with closed top, hoised and fixed in position complete all as specified and directed.

Taking down aluminium point wiring(light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants regulator, socket, light fitting etc, and removing and making good disturbed surface of walls, floors, etc to matches complete all as specified and as directed.

M&L for light point wiring complete with 1.5 Sqm PVC insulation unsheathed muilt-starnded FRLS copper conductor 1100 Volts grade drawn through in and including 20 mm dia PVC conduit and conduit accessories, concealed in walls including making necessary chases in walls and making good to match with existing surface and terminated to and including provision of modular metal flush boxes (metal switch board of any type and size) with modular metal frame plate and white cover for housing switch, sockets, regulators etc, including 1.5 sqmm PVC insulated unsheathed multi-stranded FRLS copper conducotr cable as earth continuity conductor and connecting to common earth dolly, complete for one 5 amps one way modular switch for one light point, complete all as specified and directed.

All as per SI item No. 110 here-in-before but for one fan point controlled by one 5 Amps one-way modular complete all as specified and as directed.

All as per SI item No. 110 here-in-before but for one Exhaust fan point controlled by one 5 Amps one-way modular complete all as specified and as directed.

All as per SI Item No. 110 here-in-before but for one 3 pin socket out let 6 amps modular socket controlled by one way switch on same board complete all as specified and as directed.

All as per SI Item No. 110 here-in-before but for one 3 pin socket out let 6 amps modular socket controlled by one way switch on independent board complete all as specified and as directed.

All as per SI Item No. 110 here-in-before but for 15 amps socket outlet with 2.5 Sq.mm copper cable including 2.5 Sq.mm PVC insulated copper condutor cable as earth continuity conductor and connecting to earth dolly complete all as specified and as directed.

All as per item No 110 above but with cable 4 sqmm for phase and neutral & 4.0 sqmm for earth continuity. ( For AC point wiring and 20 Amps socket ) complete all as specified and as directed.

S&F in repairs Modular switch one way 6 Amp, one module 240V, single pole complete all as specified and as directed.

S&F Modular switch one way 16 Amp, one module 240V, single pole complete all as specified and as directed.

S&F in repairs Modular Socket, 6A - 2/3 pin combination 2 module complete all as specified and as directed.

S&Fin repairs Modular Socket, 6A/16A - 2/3 pin(5pin) combination 2 module.

S&F in repairs ceiling rose two to three terminal surface backelite type AC 50 HZ 230 Volt complete all as specified and as directed.

S&F in repairs LED surface mounting ultra modern designed aesthetically LED luminaire of 15 Watts 240 V which provides soft-light and glare free symmetrical illumination suitable for surface mounting complete all as specified and as directed. Make: Havells cat part No integranxtrddlrsurd 15 w led 857s or equivalent in Philips/Wipro/Fortune Arrt

S&F in repairs LED Recess moutning 2x2 ft 34 Watt luminaire suitable to operate on 230 volts single phase AC supply complete all as specified and as directed.

S&F in repairs LED tube light fitting. 20 W, 230v regal batten type,Double side connection included with 20 watt LED tube rod single side connection complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete.

S&F in repairs LED light fitting 2x2 ft 36 Watt , 230v uniquely clean & simple lighting system offering continuous, uniform lines of light across ceilings, the aluminium extruded suspended light gives continuous lines of light distribution with the possibility of various shapes complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable joint kit/mounting kit and mains cable size complete all as specified and as directed. Make : Havells cat part No venusneo2x2plr36wled857g2 or equivalent in Philips/Wipro/Fortune Arrt

S&F in repairs LED Recessed mountning 1x4 ft 36 Watt luminaire suitable to operate on 230 volts single phase AC supply complete all as specified and as directed. Make : Havells cat part No venusneo1x4plr36wled857g2 or equivalent in Philips/Wipro/Fortune Arrt

S&F in repairs Modular fan step regulator, 120W - 2 Module complete all as specified and as directed.

S&F in repairs CRCA sheet metal enclosure with metal clad plug and socket single phase with three pin and earth plug & socket suitable for surface/flush mounting 240 V, 20 Apms capacity controlled by and including one 20 Amps MCB SP, 10 KA capacity complete all as specified and as directed.

S&F fixing in repairs Single pole and neutral Sheet metal enclosure 12 way double door for MCB’s, Phosphatised Powder Painted with Bus Bar 200 amp rated, 240 volt AC complete all as specified and as directed.

S&F in repairs Single pole and neutral Sheet metal enclosure 8 way double door for MCB’s, Phosphatised Powder Painted with Bus Bar 200 amp rated, 240 volt AC complete all as specified and as directed.

S&F in repairs sheet metal enclosure for pre wired distribution board double door, powder coated VTPN 12 way with out MCCB, three phase 415 volt with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and as directed.

S&F in repairs sheet metal enclosure for pre wired distribution board double door, powder coated VTPN, 8 way with out MCCB, three phase 415 volt with 100 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and as directed.

S&F in repairs of unserviceable MCCB TP 160 Amps capacity 25 KA 415 Volts 50 HZ complete all as specified and as directed.

S&F in repairs of unserviceable MCCB TP 100 Amps capacity 16KA 415Volts 50 HZ complete all as specified and as directed.

S&F MCB in repairs Single pole and neutral 40 Amps capacity 10 KA 'C' curve 240 Volts 50 HZ complete all as specified and as directed.

S&F in repairs MCB TPN 63 Amps capacity 10 KA 'C' curve 415 Volts 50 HZ complete all as specified and as directed.

S&F in repairs MCB TPN 32 Amps capacity 10 KA 'C' curve 415 Volts 50 HZ complete all as specified and as directed.

S&F in repairs MCB single pole (SP) 10 kA of 6 Amps to 32 Amps capacity 240 Volts 50 HZ complete all as specified and as directed.

S&F in repairs CRCA sheet metal enclosure with metal clad plug and socket three phase with five pin and earth plug & socket suitable for surface/flush mounting 415 V, 63 Amps capacity controlled by and including one 63 Amps MCB TPN, 10 KA capacity complete all as specified and as directed.

S&F in repairs CRCA sheet metal enclosure with metal clad plug and socket three phase with five pin and earth plug & socket suitable for surface/flush mounting 415 V, 32 Amps capacity controlled by and including one 32 Amps MCB TPN, 10 KA capacity complete all as specified and as directed.

S&F in repairs CRCA sheet metal enclosure with metal clad plug and socket single phase with five pin and earth plug & socket suitable for surface/flush mounting 240 V, 63 Amps capacity controlled by and including one 63 Amps MCB SPN, 10 KA capacity complete all as specified and as directed.

M&L for sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade FRLS multistranded copper conductor and drawn through in and including PVC conduit of medium grade and condiut accessories of suitable size concealed in walls with, necessary civil works for making good distrubed surface, and/or laid on surfaces over ceilings/columns etc and connecting terminal ends to DBs and DB's including of 1 run of 6 Sq.mm insulated multistanded FRLS copper cable as earth continuity conductor and connecting to common earth dolly including taking down old one complete all as specified and directed (Sub BDs). Note;- (i) Two runs of 6 Sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of suitable size of PVC rigid conduit and required conduit accessories shall be measured as one unit length.

M&L for sub main wiring complete with 2 runs of`10 sq.mm PVC insulated and unsheathed 1100V grade FRLS multistranded copper conductor and drawn through in and including PVC conduit of medium grade and condiut accessories of suitable size concealed in walls with, necessary civil works for making good distrubed surface, and/or laid on surfaces over ceilings/columns etc and connecting terminal ends to DBs and DB's including of 1 run of 10 Sq.mm insulated multistanded FRLS copper cable as earth continuity conductor and connecting to common earth dolly, including taking down old one complete all as specified and directed (Sub BDs). Note;- (i) Two runs of10 Sq.mm copper conductor, one run of 10 sq.mm copper earth continuity conductor and one run of suitable size of PVC rigid conduit and required conduit accessories shall be measured as one unit length.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI medium grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1 : 3 : 6 type C-1, 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar,GI medium grade pipe for earth lead protection including necessary excavation earth work in any soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and including taking down old one complete.

S&F in repairs Modular RJ 11 Socket , 1 module,including connected items for fixing in flush box complete all as specified and as directed.

Taking down and dismantling old unserviceable rusted strips including connected items from buildings, walls and roof complete all as specified and as directed.

S&F aluminum strip 25 x 3.15 mm complete with saddles and fixing screws for roof / down conductor on porcelain/epoxy spacer insulator or fixed in GI Pipe complete all as specified and as directed. Note :- Rates quoted by the contractor are deemed to be included for cutting ,jointing pieces of strip with nut bolt etc.

Refixing old aluminum strip 25X3 mm complete with saddles and fixing screws for roof /down conductor on procelain /epoxy spacer insulator fixed on wall/roof at any height complete all as specified and as directed. Note :- Rates quoted by the contractor are deemed to be included for cutting ,jointing pieces ofstrip with nut bolt etc.

S&F in repairs porcelain/epoxy white / brown / green spacer insulator with one GI stud bolt with nut and washer with necessary drilling for bolt hole for holding / fixing roof conductor / down conductor of lightning conductor complete all as specified and as directed.

S&F in repairs GI light grade pipe of 20 mm dia for fixing air termination rod and earth strip on roof including dismantling of old worn out GI pipe complete all as specified and as directed.

S&F in repairs single pointed air termination aluminium rod 12-mm dia 300 mm long with fixing arrangement including dismantling of old unserviceable/ deshaped conductor and removed from site of work complete all as specified and as directed.

S&F in repairs Test Point Terminal Block made of gun metal or phosphores bronze size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head Screw complete all as specified and as directed.

S&F in repairs, Earth continuity conductor with 20x3mm copper strip fixed to wall on batten or recess or chases with necessary porcelain insulators or buried in ground or drawn in conduit/pipe/wall or fixed to poles or any other indicated situation for loop earthing etc., complete all as specified and as directed.

S&F in repairs GI pipe 40mm dia light grade for protection of Copper Earth strip lain in trenches or on walls with necessary clamps complete all as specified and as directed.

M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI strip 25x4mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I excavation in any type of soil including testing on completion complete all as specified and directed.

Supplying, installation, testing and commissioning of TWO LOOP micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2km, network communication card, minimum 640 character graphics/LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory power supply unit (230±5%V, 50 hz), 48 hours backup with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integratyin with analog/digital voice evacuation system (which is part of the schedule of the under SH:PA system) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BAC net/mod bus over IP complete all as specified and directed.

Supply and install Auto dialing system (E-dialer) suitable for addressable type fire panel system consisting of storage capacity of 15 to 20 telephone numbers programmable type, including connection to the existing fire alarm panel and connecting to the fire station with demonstration complete all as specified and as directed.

S&F Detectors Complying with and type certified to EN - 45 Addressable type multi detector with smoke and heat combination Photoelectric /Optical with base with self buil intelligence as per IS: 11360 complete all as specified and as directed.

Supplying, installation, testing and commissioning of Manual call point (MCP) shall be addressable and comprises of a push button placed in a suitable metallic enclosures with a break glass or fibre front cover suitable for use in outdoor environment with a "Break glass" message on the glass complete all as specified and as directed.

S&F new electric sounder cum strobe suitable for addressable type alarm system complete all as specified and as directed.

S&F remote respones indicators on wall or with the false ceiling with LED indicator lamp suitable for addressable type complete all as specified and as directed.

S&F connecting testing maintenance free battery 12 Volts, 7AH suitable for addressable fire alarm system complete all as specified and as directed.

Supply and laying 2 core 1.5 Sqmm PVC sheathed armourd copper conductor cable 1100 Volts grade FRLS cable complete all as specified and as directed.

S&F PVC conduit of 20 mm dia to the wall surface using clips of necessary size complete all as specified and as directed.

S&F an integrated public address and talk back facility alongwith 06 Nos loud speakers with minimum 1KW and neccessary connected accessories complete all as specified and as directed.

S&F fire exit route indicator board with inbuilt LED luminaire complete set complete all as specified and as directed.

S&F repeater panel suitable for two loop addressable type panel complete all as specified and as directed.

M&L, for laying 6 core 1.5 Sqmm armoured, multistranded copper cable complete all as specified and as directed.

S&F short circuit isolators for fire alarm complete all as specified and as directed.

S&F RCCBs for earth leakage, short circuit, and over load protection of capacity 63 Amps and four pole leake current up to 300 mA complete all as specified and as directed.

S&F fire hydrant landing valve type A (single head outlet ) of 63mm dia conforming to IS 5290 complete all as specified and as directed.

S&F fire hydrant landing valve type A (Double head outlet ) of 63mm dia conforming to IS 5291 complete all as specified and as directed.

S&F hose box for keeping 2 nos hose pipe of length 15 meter each branch pipe, nozzle ,coupling, etc of MS sheet of thickness 2.0mm complete all as specified and as directed.

S&F 63mm dia gun metal branch pipe with 12.5mm nozzle conforming to IS-903 complete all as specified and as directed.

S&F hose reel drum of 30mm dia and 30 meter length conforming to IS 5132 complete all as specified and as directed.

S&F and fix fire hydrant stand post with provision of single outlet conforming to IS 908 complete all as specified and as directed.

S&F, booster motor pump for 440V , 3 phase, 50Hz, conforming to IS-12469:1988 with CI casing bronze impeller and stainless steel shaft mounted on heavy duty bearing suitable for 440V 3 phase 50Hz 30m head 450 LPM discharge complete all as specified and as directed.

S&F heavy duty 100mm dia GI pipe complete all as specified and as directed.

S&F heavy duty 150mm dia GI pipe complete all as specified and as directed.

S&F fire, 100mm bore hand operated butterfly valve of pressure not less then 15kg /Sqcm with complete set complete all as specified and as directed.

S&F pressure guage 100mm dia with ball valve of pressure 21Kg/Sqcm complete all as specified and as directed.

S&F fire brigade inlet connection 4 way complete all as specified and as directed.

S&F 150mm dia non return sluice valve complete all as specified and as directed.

S&F 150mm dia sluice valve of class 1.6 PN complete all as specified and as directed.

S&F automatic air release valve 100mm dia suitable for domestic water with 100mm gun metal stop valve complete all as specified and as directed.

S&F sluice valve 100mm dia class PN 1.6 complete all as specified and as directed.

S&F RRL hose of 15 m, type A complete all as specified and as directed.

S&F pressure switch universal type complete all as specified and as directed.

S&F non return sluice valve of size 100mm dia complete all as specified and as directed.

S&F indoor type hose cabinet made out of 18 gauge MS sheet 800x600x250mm with double door with 4 mm thick glass and door frame made 16 gauge MS sheet painted fire red outside and brilliant white inside to accommodate 1 No hose reel ,02 nos 63mm dia hose 15 meter long 1 No branch pipe & nozzle inside yard complete all as specified and as directed.

Supplying, laying, jointing, testing and commissioning 1100 volts grade, 16 Sqmm 4 core LT XLPE insulated, PVC sheathed as per IS-7098 (Part-I), 1988 galvanized steel strip or wire armoured, heavy duty, electric cables, with multistranded aluminium conductor laid in trenches/ passing through pipe/duct/road crossing or fixed on poles, walls with suitable size clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., including taking down unserviceable cable complete all as specified and directed. Note : Earthwork Excavation, sand cushioning GI pipe and cable protection will be measured and paid separately.

Supply ,Install ,testing and commissioning , factory made and tested ,CPRI approved LT panel board outdoor type, weather , dust and vermin proof , free standing floor mounting type mounted on the floor, separate cable alley for all the feeders, suitable for 400Volts , 3 phase 4wire 50Hz AC supply system, conforming to IS, IP-54 class protection and made of 3.15mm CRCA mild steel sheet & angle iron frame , compartmentalized with rubber gasket hinged doors, front & rear opening and locking arrangment , prewired with suitable size of PVC insulated copper conductor ,copper control wiring of required size of instruments and duly powder coated on outside and inside including air ventilation for heat of dissipation, suitable size knock out holes for cable of glands ,neccessary earthwork excavation and provision of PCC platform 100mm thick with PCC 1:2:4 type B-2 using 40mm graded stone aggregate one meter around of panel board ,cable gland and lugs for incoming and outgoing cable etc.,indepndent multi layer chambers to accoommodate complete all specified and directed including the following accessories:-

M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI wire 4mm dia as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed by Eng-in-charge. Note: The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 15mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl. Page No. 422 of SSR Part-II.

S&F Earth continuity conductor with 25x4 mm copper strip fixed to wall on batten or recess or chases with necessary porcelain insulators or buried in ground or drawn in conduit/pipe/wall or fixed to poles or any other indicated situation for loop earthing etc., complete all as specified and as directed.

SPAAN Infratech

Maruthi international

M/S GDR CONSTRUCTIONS

VIJAY VINAYAKA INFRA

SHILPA CONSTRUCTION COMPANY

Dwarka Pershad Radhey Ramanlal