Special Repair and Renovation of Computer Centre Department in Jammu University Campus University of Jammu

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of 1.0mm (avg.) thickness of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/ltr. on New work (two or more coats) over and including priming coat with water thinnable cement primer of approved brand and manufacture of required shade and colour complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work (Make Asian/ Nerolac/Berger)

Renewing glass panes, with putty and nails wherever necessary including raking out old putty Float glass panes of thickness 5.0 mm(weight not less than 12.5 Kg/sqm

Repairs to plaster of thickness 12mm to 20 mm in patches including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand). All work upto floor V level.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking at site. Of area beyond 3 sqm.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking at site. Of area of 3 sqm. and below

Higher charges of welding set including cost of labour (welder with helper) and welding rods etc. complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood including applying a coat of wood primer and then painting with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac/Berger)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including applying a coat of wood primer and then painting with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac/Berger)

Supply & fixing of following items including cost of nails,screws etc as required. Aluminum Sheet

---------------do------------------- Door Seal of required size

---------------do------------------- 4mm commercial ply

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. 250 x 10 mm

----------------do-------------------- 150 x 10 mm

-----------------do------------------- 300 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete, 125 mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 300 x 16 mm

-----------------do------------------- 150 x 10 mm

---------------do-------------------- 250 x 16 mm

Engagement of Labour for different works. Carpenter II Class

-------------------do----------------------- Mazdoor

-------------------do------------------------ Blacksmith/Welder II Class

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish outside the University Campus.

15mm Cement plaster on the rough side of single or half brick wall in cement mortar 1:4 ( 1 cement : 4 sand). All work upto floor V level.

Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer in-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat With common burnt clay (non modular) brick tiles of class designation 10.0

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase

Providing and fixing 12mm thick Toughened glass including cost of Wastage,labour, Accessories/Nut bolts all Job Complete

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Dismantling tile work in floors and roofs laid in cement mortar including disposal of rubbish/mulba outside the University Campus. For thickness of tiles 10 mm to 25 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete in all Shades

Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades size as approved by Engineer-in-Charge in skirting, risers of steps andexcept burgundy, bottle green, black of any dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 sand) and jointing with grey cement slurry @ 3.3kg per sqm including coarse pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material outside the University Campus.

Demolishing mud phaska in terracing and disposal of material outside the University Campus.

Dismentalling/Demolishing of Existing Urinals and Wash Basin including stacking at site.

Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site as per direction of Engineer in-charge. Upto 150 mm diameter

Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable material outside the University Campus.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material outside the University Campus.

Providing and laying in position cement concrete of specified grade including curing, centering and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc. (Make Parkash Surya/Jindal/Tata) 15 mm dia nominal bore

-------------do--------------- 20 mm dia nominal bore

--------------do---------------- 40 mm dia nominal bore

---------------do---------------- 50 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15 mm dia nominal bore

--------------do---------------- 20 mm dia nominal bore

--------------do------------------ 40 mm dia nominal bore

--------------do------------------- 50 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (DRP/ShIP Make). 15 mm dia nominal bore

--------------do-------------------- 20 mm dia nominal bore

-------------do---------------------- 40 mm dia nominal bore

--------------do--------------------- 50 mm dia nominal bore

Providing and fixing PVC pipe of 4 Kg/sqcm pressure of approved quality (Make Finolex/Prince/Supreme). 110 mm dia

-----------------do------------------- 75 mm dia

Providing and fixing PVC Bend of approved quality (Make Finolex/Prince/Supreme). 110 mm dia bend

------------do--------------- 100 to 75mm Dia Floor Trap

Providing and fixing mirror of superior glass (5 mm thick) of approved quality of Size 2'-0" x 2'-0" with stainless steel screws fixed on Plastic Drowel including bevelling of edge complete as per the direction of Engineer -in- Charge

Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.( Make Cera/Hindware/ Parryware/ Jaguar )

Providing and fixing 15 mm nominal bore C.P. brass angle valve conforming to IS : 8931 ( Make Cera/Hindware/ Parryware/ Jaguar )

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms ( Make Cera/Hindware/ Parryware/ Jaguar )

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.( Make Jaguar/Hindware/Parryware)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin URS-WHT-132530 with fittings accessories of size 375 x 320 x 620mm with Auto closing concealed urinal flushing valve with wall flange (PRS-073 ) ( Make Cera/Hindware/ Parryware/ Jaguar )

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.( Make Cera/Hindware/ Parryware/ Jaguar )

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.( Make Cera/Hindware/ Parryware/ Jaguar )

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: Range of two squatting plates with 5 liter P.V.C. automatic Flushing cistern ( Make Cera/Hindware/ Parryware/ Jaguar )

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth.Granite Stone of approved shade. 16 mm thick

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ( MAke Hindware/Parryware/Jaguar)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood. 30 mm thick

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. Second Class Deodar Wood 30 mm thick.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work (Make Asian/ Nerolac/Berger)

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin Rubber Stopper

Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

----------------do-------------------- Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

----------------do----------------- Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Cleaning of Septic tank by mechanical means including disposal of Human Excreta/sludge outside the University Campus.

MANZOOR AHMED NATNOO

SIDHANT GANDOTRA

M/S NITIN SHARMA