GE (N) P/TOKEN- 07 OF 2025-2026 SPECIAL REPAIRS TO ROOF TREATMENT AND ALLIED WORKS IN BLDG NO 40/76 ,126 AND 133 AT KOLHAPUR MIL STN IN THE AREA OF AGE B/R (E) UNDER GE (N) PUNE

Amount

Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scrapping out old treatment/ bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned of all foreign material and dust to receive new water proofing treatment and removal of rubbish off the premises to a distance exc. 500m and not exc 1.5 Km complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not therwise specifically provided for complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) averaging 50mm thick as in leveling course on roof slab including finishing the surface of concrete even and fair to receive screed complete all as specified and as directed.

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed by Engineer-in-Charge including testing :-(a) 10mm thick rendering in cement mortar (1:3) mixed with and including integral water proofing compound @ 3% by weight of cement on roof slab finished even and fair complete (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.70Kg/Sqm shall be applied. (c) On this primered surface, APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.60 Kg/Sqm with plain finish shall be laid by torch application method (d) Apply two coat of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) The overlap while torching shall be 100mm at the longitudinal edges and 150mm at the ends. (f) The treatment shall be carried as per manufacturer instructions through authorised applicator. Note: Temporary arrangement has to be made for supply of water during roof treatment work.

Dismantling water tanks exc. 500 litres of capacity and not exc.1000 litres capacity and removing to store complete all as specified and as directed.

Dismantling water tanks exc. 250 litres of capacity and not exc.500 litres capacity and removing to store complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale, dirt etc from tanks, mouths of circulating pipes for capacity of tank exc.500 litres and n.exc. 1000 litres complete all as directed

All as per serial item No.7 here-in-before but for tank capacity exc.250 litres and n.exc. 500 litres

Supply and fix, rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect,algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth,clean and free from any hidden internal defects, hoisted and fixed in postion including S & F necessary GI fittings,inlet/outlet washout,overflow pieces long nipples,checknuts & washer,20mm dia PTMT valves igh pressure of PTMT with epoxy coated aluminum rod & high density plastic ball and 20 mm brass stop cock etc.complete all as specified and as directed.

Supply and fix, rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect,algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth,clean and free from any hidden internal defects, hoisted and fixed in postion including S & F necessary GI fittings,inlet/outlet washout,overflow pieces long nipples,checknuts & washer,20mm dia PTMT valves igh pressure of PTMT with epoxy coated aluminum rod & high density plastic ball and 20 mm brass stop cock etc.complete, all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to storecomplete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to storecomplete all as specified and as directed.

Taking up or down 25 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to storecomplete all as specified and as directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 25 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.)complete all as specified and as directed.

Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.)complete all as specified and as directed.

Refixing 25mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.)complete all as specified and as directed.

M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified.

Supply and fix in repair for PVC (SWR) pipe 110mm dia single socketed with rubber ring joints/ adhesive fixed to walls with PVC clamps incl taking down pipe of any type (AC/Iron/PVC) complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm dia single socketed with rubber ring joints/ adhesive fixed to walls with PVC clamps incl taking down pipe of any type (AC/Iron/PVC) complete all as specified and as directed.

Removing of vegetation / plantation on the wall/ roof/ any position of up to any height of building including necessary scaffolding and each roots girth of 2 inch and above and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

Supply and fix in repair PVC (SWR) bends any radius of 110mm dia with oval and access door complete all as specified and as directed.

Supply and fix in repair PVC (SWR) bends any radius of 75mm dia with oval and access door complete all as specified and as directed.

Material and labour for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.

Material and labour for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock

Material and labour for opening the fittings like Y bend, T etc. from the outlet pipe, fills properly the loose joint between bend and out let pipe with solvent and fixing properly to ensure leakage free joint and plastering the hole of size of 50/75/110mm including taking out old unserviceable PVC/ CI fittingscomplete all as specified and as directed.

M & L for preparation of external surfaces of walls and applying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such as , CEMISTIK PU 50 heavy Duty water proofing coating or equivalent complete all as per manufacturer instruction as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L non-skid coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete, all as specified and directed.

M & L Textured heavy duty exterior tiles of size 300mmx300mmx10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 15mm thick in CM (1:4) including demolition of existing tiles complete, all as specified. Make:- Johnson Endura textured design or equivalent of Kajaria/Somany).

Material and labour for machine pressed precast cement concrete glossy interlocking paver block any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including dismantling existing blocks, tiles, removing rubbish off the premises complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete including making good to floor all as specified.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor all as specified.

S&F in repair dual flush 5&10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified.

S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm /600mm complete all as specified.

S&F in repairs hand shower (health faucet) of ABS body with 1.0m long easy flexible tube in chrome finish and wall hook complete all as specified and directed by Engr-in-charge.

S&F in repairs Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified.

S&F 20 mm dia stop valves cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both endsfor iron pipe

S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified.

S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified.

S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified.

Dismantling single layer Mangalore pattern tiles or similar tiles in roofing and taking out from the site without disturbing existing false ceilingcomplete all as specified and as directed.

Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry class A-A complete all as specified and as directed.

Fixing only roof tiles Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed. (Note : Serviceable tiles obtained from dismantled item shall be re-used.)

Material and labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) etc. including demolition of existing ridge or hip tiles bedded in cement mortar complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting , any gauge, thickness including Nainital or similar pattern roof coverings complete all as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, rafter, purlins etc, under 40 Sqcm in section, unframed workcomplete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 as in batterns for roofs complete all as specified and as directed.

Supply and fix for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.

Supply and fix for rolled mild steel frame work as in grills, doors or gates of angle or other sectioin with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings also fastenings and fixing etc. conforming Fe 290-W(Gde-E-165) quality -B complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surface including preparation complete all as specified and directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etccomplete all as specified and as directed.

M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specifed and directed by Engineer- in -charge. Make:-Gyproc/Armstrong.

M & L for rainwater gutter system of SWR pipe 250 mm nominal dia. half round type alongwith all accessories/ fittings complete all as specified and directed.

Demolition of brick work /block masonry/stone boulder built in cement mortar .

M & L for old size fly ash brck in CM 1:6 . straight or curved on plan exc 6M mean radius , built in CM 1:6

Labour only for brickwork with old size bricks straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed

M&L for rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair and provision of sagol finish including taking down existing plaster with two coats of oil bound distemper of any tint over a coat of alkali resistant primer complete all as specified and as directed

M&L for rendering 15mm thick cement plaster in CM 1:4 on bricks work or concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exterior emulsion weather proof paint paint over a coat of primer including taking down existing plaster complete all as specified and as directed

M&L for rendering 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exterior emulsion weather proof paint over a coat of primer on new surface complete all as specified and as directed

M&L for rendering 15mm thick cement plaster in CM 1:6 on bricks or concrete surfaces finishing the surfaces even and fair and provision of sagol finish with two coats of oil bound distemper of any tint over a coat of alkali resistant primer on new surface complete all as specified and as directed

Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing stone of any description complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F in repair vitreous china wash hand basin white of bowl size 550mm x 440mm including waste coupling and PVC waste pipe 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy type for 15 mm bore pipe, including M S brackets complete all as specified and as directed

S&F in repair Vitreous china Urinal, Half stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified and as directed

S&F in repair cast copper alloy CP shower arm square (450--600)mm long with flange complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated shower rose 115mm size square or round shape (without arm) with swivel joints including fixing with arm/ pipe complete all as specified and as directed.

S&F in repair Toilet paper holder of stainless steel, complete all as specified and as directed.

S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, complete all as specified and as directed.

S&F in repirs wall mixer brass chromium plated quarter turn 2 in 1 with bend pipe with provision for over head shower with bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed.

S&F in repair grating round 75 mm size of CP with/without hole all as specified.

S&F in repair grating round 100mm size of CP with/without hole all as specified.

Taking out old rusted/unsv, structural steel work such as steel windows/ventilators and removing same from work site complete including necessary cuttings in brick walls all as directed.

S&F Aluminium powder coated louvered ventilator using rectangular tube of size 63.5X52X1.5mm thick, blades set, with provision of exhaust fan using aluminium section heavy duty including glass 4mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

All as per srl item No. 83 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed

Taking down shutters of any description not exc. 1 sq. m each complete all as specified and directed

All as per srl item No. 85 above but exc. 1 sq. m but n exc 2 sqm each complete all as specified and directed

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick Pvc lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

Supply and fix second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats.

S&F in repair Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

S&F in repair, 150mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

GULMOHAR CONSTRUCTION (BID ID -3296317)

SHRIYA CONSTRUCTION (BID ID -3296663)

shrilaxminarayan constructions (BID ID -3296744)