PROVISION OF FACE LIFT TO ENTRANCE OF CE (RND) OFFICE AND HARD STANDING FOR PARKING AREA NEAR BLDG NO.4.16 OFFRS MESS OF CE (RND) SECUNDERABAD AND REPLACEMENT OF BER AIR CONDITIONERS AT DMDE SECUNDERABAD

Amount

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removing all debris outside MOD Land complete all as specified and as directed.

Use and waste of form work to sides of pillars,posts, struts, piers, columns and stanchions square,rectangular or polygonal for fair finished faces complete all as directed.

Use and waste of formwork to flat sides and soffits of floor or roof beams, beam haunchings, cantileveres, shelves etc for fair finished surfaces complete all as directed.

M&L for RCC (nominal mix) type B1 1:2:4 using 20mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed

M&L for RCC (nominal mix) type B1 1:2:4 using 20mm graded aggregate as in beams, cantilevers, lintels over 1.50 meter span and similar items all as specified and as directed

M&L for MS TMT bars 10mm dia over cut to length, bent to shape required including cranking, bending spirally or hoping for columns hooking ends and binding with and including mild steel wire concealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No. 6 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates), n.exc 100 mm thick as in levelling course over roofs finished even and smooth without using extra cement complete all as specified and as directed

S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position as in spouts including making necessary holes in walls or parapet and making good with cement mortar 1:4 complete all as specified and directed.

M&L for MS framed work such as gates, grills, gratings and frames etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; handrails; railings; framework of valley gutters and similar work con- forming to Fe.290.Gde-E-165de E-165 complete all as specified.

S&F 2.00 mm thick mild steel perforated sheet as in covering to steel door, barred iron doors etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to steel members, flush with outer edges and 20 mm bend at edges all round including bending, turning up, mitred angles, stopped ends, incl welding etc as required on site complete all as specified.

M&L for prepration of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) including demolition of brick work built in cement mortar complete all as specified

M&L 15mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces, finished even & smooth surfaces without using extra cement complete all as specified.

M&L for preparation of new plastered or un-plastered surface of walls and applying two coats of distemper oil emulsion over a coat of primer on walls complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat oil bound distemper complete all as directed.

M&L light shade vitrified ceramic tiles approved shade 10 mm thick (square/rectangular) polished area of each tiles n.exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over M&L 15 mm thick screed bed in cement mortar 1:6 including dismantling existing tile work with screed bed complete all as specified and directed.

M&Lfor 18-20mm thick Granite (lakha red) machine cut, in dados/wall cladding laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specifed and as directed

Supply & fixing of UPVC windows or UPVC framed portion 3 track sliding window with two glazed and one wire mesh sliding shutters of profile width of from 56 mm to 62 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick tinted float glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as directed including taking down old steel windows complete all as directed

S&F 35 mm thick factory made pressed moulded panelled door of single or multi panel texured masonite moulded door fabricated using well seasoned and chemically treated solid second class hardwood styles, rails and panels made out of tubular core bonded with PF synthetic resin confirming to BWP grade IS: 848. Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin. The door's colour, texture design shall be approved by GE complete ass as specified and directed.

M&L for prepration of new wooden surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as directed.

S&F 200 mm size extruded aluminium alloy handles, fabricated type anodised finish complete all as directed.

S&F 12mm thick Toughened frosted/Tinted glass doors both sides swing with self locking floor spring suitable for glass door fitted with necessary fixing arrangements with wall and stainless steel pivot complete in all respect as specified & directed. Make : Modiguard/ saint Gobain

S&F Stainless steel door lock suitable for glass door of thickness 10-12mm fixed in floors complete with necessary arrangements complete. Make : Godrej/Ozone

S&F Stainless steel door handle 450mm long for toughened glass door including necessary holes in glass complete in all respect

M&L for preparation of old steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of exterior weather proof paint complete all as specifed and directed.

S&F 4mm thick aluminium composite panel (ACP) cladding metallic finish in combination of copper and steel grey sheets of and frame work with section size using 50x25x2mm thick aluminium sections and joints sealed with exterior grade silicon sealant all as per manufacturer instruction fixed to walls complete all as specified.

M&L for 3D stainless steel letters of size 59cmx 30cm made out of 1.2 mm thick SS 304 grade sheet matt finish as in sign boards including fixing as per manufacturer's instructions complete all as specified. The design and pattern of letters shall be decided by accepting officer.

M&L for 3D stainless steel letters of size 30cmx 15cm made out of 1.2 mm thick SS 304 grade sheet matt finish as in sign boards including fixing as per manufacturer's instructions complete all as specified. The design and pattern of letters shall be decided by accepting officer.

M&L for 3D stainless steel emblem of size as decided by accepting officer made out of 1.2 mm thick SS 304 grade sheet matt finish including fixing as per manufacturer's instructions complete all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soils complete all as specified.

Removing execavated material n nexc 50m and depositing wihre directed at a level n exc 1.5m starting point

Hard core of broken stones of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface

M&L 75mm thick plain cment concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate

M&L for machine pressed precast concrete paver block with grey cement and pigment of approved tint, shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, as in hardstanding/pavings laid over 40 mm thick sand cushioning layer complete all as specified. Make : NAVEEN/SPARTEK/NITCO

M&L for cement concrete 1:2:4 type B1(using 20mm graded aggregate) as in copings, kerbs, holdfasts and similar items etc, weathering, slightly rounded or chamfered angles and throating,all as specified and as directed

M&L factory made pre-cast reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate ) , as in cover slab for drain or man holes, septic tank etc including necessary form work and reinforcement etc.

S&F sheet metal enclosure MCB DB TPN double door type AC 415 V 4 way with 200 Amps rated bus bar,vertical complete all as directed.

S&F sheet metal enclosure MCB DB SPN double door type AC 240 V 8 way with 200 Amps rated bus bar, complete all as directed.

S&F Isolator TPN 415 Volts 63 Amps C curve 10KA braking capacity, 230Volts, 50Hz complete all as directed.

S&F MCB SPN 32 Amps C curve,10KA breaking capacity, 230Volts,50Hz complete all as directed

S&F MCB single pole 6 to 16 Amps C Curve, 10KA breaking capacity, 230 Volts, 50Hz complete all as directed.

S&F LED flood light fitting with driver inside PDC housing 35 watt fixed with suitable size of angle Iron to a directed angle for gate/wall lighting all as specified.

S&F sky cove LED strip of 28 Watt capacity, water proof of 5 mtr each length CDL with driver, in any colour as decided by accepting officer for aesthetic effect to wall lighting and electric connections at required places including minor fitting required for fixing on wall complete all as specified and as directed. Make: Philips or equivalent approved by GE

S&F 20 mm dia transparent/white acrylic pipe fixed on wall with PVC clamps all as specified.

M&L for sub main wiring with 2 run single core 4.0 sqmm PVC unsheathed copper multistranded, FRLS conductor drawing into and including PVC conduit medium grade of size not less than 25 mm dia with all fittings and fixtures like L-bow, saddles etc of white/Ivory colour PVC conduit including multistranded copper earth conductor 1 run of 4.0 sq mm as earth continuty conductor all as direacted. Note: Three runs of 4 Sqmm size copper conductor and one run of 25mm dia PVC conduit shall be measured and paid as one RM only.

S&F celling rose PVC/ polycarbonate three terminal surface bakelite complete all as specifiend and directed.

S&F Laying LT UG cable heavy duty armoured with aluminum conductor multistranded PVC insulated and sheathed with suitable lugs, laid in trenches / ducts / panel or fixed on wall / pole or drawn through poles, cross-sectional area 3.5 core 25 sq. mm complete all as specified and directed. Make : Havells/Universal/Gloster

Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes pier holes etc., not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard / dense soil, complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil complete all as speciifed and directed.

Removing surplus excavated material (soils) to a distance exceeding 250metre but not exceeding 500metre and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

Supply and spreading natural dry, clean river sand in trenches for cushioning of cable complete all as directed.

M&L for brick protection with common burnt bricks sub class ‘B’ of size 230x115x75mm for cable protection complete all as directed.

S&F Energy saving, decorative, corrosion resistant, surface-suspended LED luminaires with annular shape and opal diffuser and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No :MONDO400RDP/S25WLED830SPSWH or Equivalent make of Philips/Bajaj

Supply, Installation, testing and commissioning of split type Air Conditioner 1.5 TR capacity inverter type 5 star rated, single phase, 230 volts complete with all accessories as provided by the manufacturer such as indoor, outdoor units refrigerant copper tubing, insulation packing and water outlet pipe to be brought out side and electrical copper cable PVC insulated multistranded sheathed 3 core of adequate size and length, and metal stand / PCC base as per site condition shall be provided complete all as directed.

Supply, Installation, testing and commissioning of room window type air conditioner electric driven 1.5 TR capacity 5 star rating single phase, 230 volts 50 Hz complete with all accessories as provided by the manufacturer and electrical copper cable PVC insulated multistranded sheathed 3 core of adequate size and length including necessary cutting of grill and window and packing the gaps with insulation materials as per site requireement complete all as specified and directed. Note: Rate quoted shall be deemed to be included for fixing up 3rd floor Make for srl item Nos. 58 & 59 : Bluestar / Voltas / Daikin /Hitachi

Supply & fix voltage stabiliser 5 KVA single phase 230 volts 50 cycles wall mounting type suitable for 1.5 TR split/window type AC with low/high voltage cut off and intelligent delay input voltage 170 volts to 240 volts & input voltage 200 volts to 240 volts input low voltage cut off 140V with time delay 3.5min complete all as directed. Make :- V-Guard / Servo / Bluebird

S & F copper tube 5/8'' dia for gas / liquid with foam insulation for split type AC on wall complete all as directed. Note: Quoted rate is deemed to include cleats and battens required and all arrangements for fixing the tubes upto third floor.

S & F PVC water drain out pipe 20mm dia with saddles for fixing on wall upto third floor complete all as specified and directed.

Supply and Fix single pole sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 10 KA 'C' series, 240 Volts complete all as specified and directed

Disconnecting both indoor & outdoor unit of AC, electric supply, copper gas tube after getting back gas to out door AC unit of capacity 1.5 TR and depositing all disconected items in MES Store Yard complete all as directed.

Disconnecting window type AC of capacity 1.5 TR and depositing all disconected items in MES Store Yard complete all as directed.

S &F in repairs submain wiring with 2 runs of 6 Sqmm PVC insulated unsheathed multi stranded copper conductor drawn through and including surface/concealed rigid PVC conduit ISI marked incl bends, tees, junction boxes etc fixed on wall / ceiling / passing through cable tray including providing 1 run of 6 sqmm PVC insulated copper conductor cable as earth continuity conductor connected to common earth dolly wire including taking down unserviceable sub main wiring and conduit complete all as directed. Note: Two runs of 6 sqmm cable and one run of 6 sqmm earth continuity conductor and PVC conduit shall be measured as one unit length.