Loading
Loading…
Loading…
Tender ID
Tender Value
₹36.9 L
EMD Value
₹73,800
Closing Date
13 Mar 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
56 conditions · 17 needing a document upload
The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. . Necessary documents to this effect as applicable,
Electrical License as per tender conditions.
In case of other than company/proprietary firm , annexure V (A) shall also be submitted by each member of a partnership firm/ Joint Venture(JV)/Hindu United Family (HUF)/ Limited liability partnership(LLP) etc., as the case maybe. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document
Power of attorney duly stamped and authenticated by a Notary Public or by Magistrate as per Tender conditions.
The tenderers are advised to download and carefully read the Tender Document attached with this Notice Inviting tender.
Tenderers are advised to submit all the documents required to be uploaded by them in Kannada/Hindi/English. Documents uploaded in any other language shall be translated to Kannada/Hindi/English and attested copy may be uploaded for better appreciation of the tender.
Mandatory documents that are to be uploaded without which the bid will be summarily rejected are mentioned in Chapter II of the Tender Document attached with this Notice Inviting Tender
CORRIGENDUM NOTICE ON IREPS: Railway may modify the tender document by issuing online corrigendum through "www.ireps.gov.in" 15 days prior to the tender closing date. For the purpose of CORRIGENDUM in the tender, NIT period is split as under: (a) ADVERTISEMENT PERIOD: The time during which all information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer
The tenderers are advised to carefully read this tender Document (Chapter I to IV) in conjunction with Indian Railways Standard General Conditions of Contract- April 2022 with latest amendments and correction slips before participating in this Tender.
The rates quoted for the relevant supply items of work shall include the cost of materials and their accessories. Similarly, for fixing/installation/erection/ Testing and Commissioning item of work shall include the cost of labour, together with the cost of providing the necessary tools and tackles etc., so as to ensure that the work carried out forms a complete supply, installation,Testing, commissioning of item work to the satisfaction of the Engineer-in-charge.
The prices quoted shall be net including all taxes and duties etc.
Documents to be Submitted Along with Tender (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN details along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case maybe. (ii)Following documents shall be submitted by the tenderer: (a)Sole Proprietorship Firm: (Note: Mandatory for whom it is applicable).
Following documents shall be submitted by the tenderer: if HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (Note: Mandatory for whom it is applicable).
Following documents shall be submitted by the tenderer: if Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (Note: Mandatory only for whom it is applicable).
Following documents shall be submitted by the tenderer: if LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (Note: Mandatory for whom it is applicable).
Following documents shall be submitted by the tenderer: if Registered Society & Registered Trust: The tenderer shall submit: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. (Note: Mandatory only for whom it is applicable).
The following documents shall be submitted by the partnership firm, with the tender: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (Note: Mandatory only for whom it is applicable).
The tenderers are advised to upload all required documents mentioned in this Notice Inviting Tender as well as in the Tender Document (Tender forms)(Chapter I to IV) along with the bid.
The schedule given in this NIT shall be read in conjunction with technical specifications/ explanatory notes and drawings given in the Tender document attached with this Tender
Upload duly filled & signed copy of "NEFT Declaration form". (please download the format from attached documents)
Partnership Deeds, Power Of Attorney Etc.: The tenderer shall clearly specify whether the tender is submitted on his/her own or on behalf of a partnership concern. If the tender is submitted on behalf of a partnership concern, he/she should upload the certified copy of partnership deed along with the tender and authorization to sign the tender documents on behalf of partnership firm. The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the contractor. Note: Mandatory only for whom it is applicable.
The tenderer whether sole proprietor, a limited company or a partnership firm if they want to act through agent or individual partner s should submit along with the tender , a power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/she/they be partner(s) of the firm or any other person specifically authorizing him/her/them to submit the tender and other tender related activities till completion of the work including signing No Claim Certificate and refer all or any disputes to arbitration. Note: Mandatory only for whom it is applicable.
The tenderer whether sole proprietor, a limited company or a partnership firm if they want to act through agent or individual partner s shall submit a power of attorney at a later stage duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner s of the firm or any other person specifically authorizing him/them to sign the agreement, witness measurements, sign measurement books, to sign contract correspondence, signing the bills etc. the GPA shall be accepted after obtaining Legal advise from LAW branch/ Hubballi division. Note: Mandatory only for whom it is applicable.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Upload the CLEAR COPY of GST Registration particulars
Electrical Arrangements for the Proposed construction of Type - II, 16 units at Vinobha Nagar colony in lieu of Quarter No.1304, Hubballi.
HE-26-2025-26SL02
HE-26-2025-26SL02
Open
Works - General
6 Months
Dharwad, Karnataka
₹0
₹73,800
18 Feb 2026
18 Feb 2026
27 Feb 2026
115 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 36,90,567 | ||
| — | 225.00 | — | — | ||
| Excavation in trenches in any kind of soil of required width and laying of LT UG cables, including excavation for joints, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m from the starting point. | — | — | — | 33,957 | |
| — | 550.00 | — | — | ||
| Supply of high density polyethylene pipe (HDPE pipe) of size 50 mm (ND) category of PE-80, PN-6 along with accessories (T joint / straight coupler etc.), ISI marked for protection of UG LT cables all as per specification | — | — | — | 30,233.5 | |
| — | 550.00 | — | — | ||
| Laying of high density polyethylene pipe (HDPE pipe) of size 50 mm (ND) category of PE-80, PN-6 along with accessories (T joint / straight coupler etc.), ISI marked for drawing of UG LT cables through the pipe all as per detailed tender specification and as directed. | — | — | — | 3,355 | |
| — | 1100.00 | — | — | ||
| Transportation, Laying, drawing through existing HDPE pipes, testing and commissioning of LTUG cable 4cx16 / 4cx25 / 4cx35 / 4cx50 sqmm as per detailed tender specifications. Note:- LT UG cable will be issued by Railways. The contractor will be responsible for collection of cables from the Elect Maintenance / Works Depot including loading, unloading, transportation and return of un-used cables back at Depot. Costs of these provisions are deemed to be included in the quoted rates. | — | — | — | 19,030 | |
| — | 2.00 | — | — | ||
| Cutting of cement concrete (PCC) surface, any type for laying of UG cables in trenches and disposing off the excavated material as directed including barricading, danger lighting and refilling the trenches in layers and consolidating complete all as specified and directed. | — | — | — | 2,156 | |
| — | 4.00 | — | — | ||
| Supply and making water / moisture proof end termination with brass double compression gland and aluminium lugs for 4 x 50 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade all as specified and directed. | — | — | — | 1,956 | |
| — | 12.00 | — | — | ||
| Supply and making water / moisture proof end termination with brass double compression gland and aluminium lugs for 4 x 16 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade all as specified and directed. | — | — | — | 4,476 | |
| — | 192.00 | — | — | ||
| Supply of 20/22 W LED Batten fitting, 240 V AC with diffuser and driver including all connected materials as per detailed specification | — | — | — | 1,32,480 | |
| — | 48.00 | — | — | ||
| Supply of Decorative wall light fixture made up of Polycarbonate, suitable for 9 W LED lamp B22 base all as per Code No. LHFOFUE1TZ1W012 of Make- Havells or equivalent approved make. | — | — | — | 32,544 | |
| — | 32.00 | — | — | ||
| Supply of 6 W LED mirror light fitting and with driver suitable for 230 V, 50 Hz AC, all as per sample and approved model / make. | — | — | — | 38,269.76 | |
| — | 272.00 | — | — | ||
| Fixing all types and all capacities of LED fittings indoor on the wall/ ceiling /rafters / girders using twin twisted PVC insulated wires, required Nos of round blocks and clamps etc, all as specified and as directed. | — | — | — | 33,184 | |
| — | 48.00 | — | — | ||
| Supply only BLDC ceiling fans, working on 230 V AC, 50 Hz of Sweep size 1200 MM all as per detailed technical specification and all as directed. | — | — | — | 1,28,496 | |
| — | 48.00 | — | — | ||
| Fixing only BLDC ceiling fans, working on 230 V AC, 50 Hz of Sweep size1200 MM all as per detailed technical specification including provision of necessary fan hooks, down rods of required length, canopies, clamps and connection with PVC insulated twin twisted wire of approved quality etc as required at site all as directed. | — | — | — | 15,120 | |
| — | 48.00 | — | — | ||
| Supply only BLDC Exhaust fan 1440 rpm, 200 mm sweep, single phase AC 230 V, 50 Hz modular type complete with all accessories such as frame with louvers, all as per detailed tender specifications and as directed. | — | — | — | 88,603.2 | |
| — | 48.00 | — | — | ||
| Fixing of BLDC Exhaust fan 200 mm sweep, single phase AC 230 V, 50 Hz modular type complete with all accessories such as frame with louvers, necessary mounting arrangements, nuts bolts, fasteners including making suitable openings on walls, making good and finishing the disturbed wall surfaces etc all as per detailed tender specifications and as directed. | — | — | — | 9,844.8 | |
| — | 16.00 | — | — | ||
| Supply and fixing of Electronic bulbul bell bird chime Call bell similar to anchor model No.8432 including provision 2 Module Gl box with cover plate with frame including connection fixing of call bell with all connected materials and works. | — | — | — | 6,088.64 | |
| — | 6.00 | — | — | ||
| Supply of 70 W, LED flood light fitting on walls / pillars including all necessary fixing arrangements such as clamps, nuts, bolts etc; as per site requirement and as per detailed specification. | — | — | — | 11,415.6 | |
| — | 6.00 | — | — | ||
| Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. | — | — | — | 972 | |
| — | 390.00 | — | — | ||
| Supply and fixing 3 pin, 5 A ceiling rose on the existing junction box / wooden block including connections etc. as required. | — | — | — | 40,560 | |
| — | 390.00 | — | — | ||
| Material and labour for point wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required including all necessary connected works such as cutting chases, drilling holes on wall / ceiling etc including plastering / making good the disturbed surfaces all as specified and as directed. | — | — | — | 4,63,710 | |
| — | 96.00 | — | — | ||
| Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. | — | — | — | 52,320 | |
| — | 112.00 | — | — | ||
| Supply and fixing 3 pin 5/6 A moudular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | — | — | — | 15,232 | |
| — | 112.00 | — | — | ||
| Supply and fixing 3 pin 5/6 A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | — | — | — | 13,552 | |
| — | 112.00 | — | — | ||
| Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. | — | — | — | 73,808 | |
| — | 128.00 | — | — | ||
| Supply and fixing 6 pin15/16 A modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | — | — | — | 28,032 | |
| — | 128.00 | — | — | ||
| Supply and fixing 6 pin 15/16 A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | — | — | — | 22,528 | |
| — | 48.00 | — | — | ||
| Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet modular socket outlet and 25 A modular MCB C curve, connections etc. as required. | — | — | — | 38,736 | |
| — | 32.00 | — | — | ||
| Supply only Electric Water heater 25 Ltrs Capacity Stationary type, ISI marked (BEE 5 Star rated), 2 KW Closed / Vented type Geyser with all connected materials and works all as per detailed specifications. | — | — | — | 1,86,862.4 | |
| — | 32.00 | — | — | ||
| Erection charges for fixing a 25 litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15 A 3 pin top. | — | — | — | 21,248 | |
| — | 16.00 | — | — | ||
| Supply and fixing 4 way (4+12), double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surfce/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, power painted including earthing etc as required. | — | — | — | 70,032 | |
| — | 16.00 | — | — | ||
| Supply and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral/Four pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. | — | — | — | 20,816 | |
| — | 16.00 | — | — | ||
| Supply and fixing 32 - 40 A, four pole (three phase and neutral) 415 V, residual current circuit breaker (RCCB) having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. | — | — | — | 55,232 | |
| — | 64.00 | — | — | ||
| Supply and fixing 5 A to 32 A rating, 240/415 V, 10 kA, Double pole miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. all as per detailed tender specifications. | — | — | — | 30,332.8 | |
| — | 1600.00 | — | — | ||
| Wiring for circuit / submain wiring alongwith earth wire with the size of 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire FRLS PVC insulated copper conductor, single core cable in recessed medium class PVC conduit including all necessary connected works such as cutting chases, drilling holes on wall / ceiling etc including plastering / making good the disturbed surfaces all as specified and as directed. | — | — | — | 4,97,600 | |
| — | 1300.00 | — | — | ||
| Wiring for circuit / submain wiring alongwith earth wire with the size of 2 X 4 sq. mm + 1 X 4 sq. mm earth wire FRLS PVC insulated copper conductor, single core cable in recessed medium class PVC conduit including all necessary connected works such as cutting chases, drilling holes on wall / ceiling etc including plastering / making good the disturbed surfaces all as specified and as directed. | — | — | — | 4,84,900 | |
| — | 900.00 | — | — | ||
| Wiring for circuit / submain wiring along with earth wire with the size of 2 X 6 sq. mm + 1 X 6 sq. mm earth wire FRLS PVC insulated copper conductor, single core cable in recessed medium class PVC conduit including all necessary connected works such as cutting chases, drilling holes on wall / ceiling etc including plastering / making good the disturbed surfaces all as specified and as directed. | — | — | — | 4,33,800 | |
| — | 48.00 | — | — | ||
| Supply and fixing of modular type Telephone socket oulet on the existing modular plate and switch box including connections as required. | — | — | — | 8,064 | |
| — | 48.00 | — | — | ||
| Supply and fixing of modular type TV antenna socket outlet oulet on the existing modular plate and switch box including connections as required. | — | — | — | 8,064 | |
| — | 320.00 | — | — | ||
| Supply and drawing co-axial TV cable RG-6, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in recessed PVC conduit as required. | — | — | — | 17,280 | |
| — | 4.00 | — | — | ||
| Fabrication, supply and erection of 6 Mtrs long hot dip galvanized octogonal pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, backelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for 6 m pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom 130 mm, top 70 mm with 3 mm thick suitable base plate and 4 Nos foundation bolts, necessary excavation for foundation and refilling all as specified and directed (excluding PCC foundation). | — | — | — | 47,200 | |
| — | 4.00 | — | — | ||
| Supply and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete- Single Arm Bracket with 1000 mm Standard 40/50 mm dia. | — | — | — | 6,800 | |
| — | 1.00 | — | — | ||
| Providing and making steel pole collar / foundation with cement concrete (1:3:6) with stone aggregate 20 mm nominal size in foundations of specified size and shape including form work, plastering if required, curing etc as required. (Volume of pole /pipe not to be deducted). | — | — | — | 8,834 | |
| — | 8.00 | — | — | ||
| Supply and embedding 40 mm dia GI pipe, medium class, in pole collar / foundation (During casting) for cable entry including bending the pipe to the required shape complete as required. | — | — | — | 5,008 | |
| — | 4.00 | — | — | ||
| Supply and fixing of 50 W, LED Street light fitting as per detailed specification. | — | — | — | 7,128 | |
| — | 24.00 | — | — | ||
| Supply and drawing 3 x 1.5 sq mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ PVC conduit as required. | — | — | — | 2,496 | |
| — | 6.00 | — | — | ||
| Material and labour for earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc with charcoal / coke and salt as required all as per detailed tender specifications / drawings. | — | — | — | 50,106 | |
| — | 40.00 | — | — | ||
| Providing and fixing 25 mm x 5 mm G.I strip on surface or in recess for connections etc. as required. | — | — | — | 11,480 | |
| — | 1.00 | — | — | ||
| Design, fabrication, Supply, fixing, connecting, testing and commissioning of LT Control Panel, cubical type, 160 A, 3 phase 4 wire system with copper bus bars of size 30 x 6 mm, outdoor type, opening from front, separate compartments for each control gear, cable alley and provision of knock-out type entry plates suitable up to 185 sqmm size cables, panel made out of 2 mm thick CRCA sheet, epoxy powder coated with grey matt finish, including base frame and legs of suitable length made out of 50 x 50 x 6 mm angle iron sections, embedded in PCC 1:2:4 foundation, consisting of the following switchgears and metering devices:- (i) MCCB 160 A, 4P. 36 KA with microprocessor based release - 01 No (ii) MCCB 100 A, 4P. 36 KA with microprocessor based release - 01 No (iii) MCB 32 A, 4P, 10 KA, - 20 Nos (iv) MCB 5-32 A, DP, 10 KA - 06 Nos (v) Energy Meter, 3, 5- 60A - 16 Nos including CTs, pilot lamps complete all as specified and as directed. | — | — | — | 2,26,420 | |
| — | 2.00 | — | — | ||
| Supply of Electrically driven bore submersible pump set of 1) capacity: 5 HP/3.7 KW 2) Phase: 3 phase, 415 V 3) Bore size: 150 mm 4) Stage: 12 5) Water discharge: minimum 90 LPm at 110 Mtrs head, 6) Input/Out put GI pipe: 50 mm (2") 7) Rating: 4/5 star 8) warranty :- Minimum 1 year 9) Approved make:- MBH, kirloskar, V-guard, Lubi, Texmo, aquatex,l waterman, Polad PSG, CRI only. | — | — | — | 80,028 | |
| — | 30.00 | — | — | ||
| Supply & Erection of High tensile heavy duty 50 mm dia UPVC pipe for submersible pump suitable for pressure rating of 20 Kg/sqcm capacity of 03 mtr length each. | — | — | — | 27,570 | |
| — | 2.00 | — | — | ||
| Supply of Cast iron adopter set suitable for 50 dia submersible column pipe Make: Ashirwad | — | — | — | 2,962 | |
| — | 1.00 | — | — | ||
| Out door type DOL starter control panel for 5 HP submersible pump set as per detailed specification. | — | — | — | 16,286 | |
| — | 150.00 | — | — | ||
| Supply of 2.5 sq.mm PVC Sheathed industrial 3 core flat submersible cable for submersible pump motors with voltage grade upto 1100 Volts as per IS:694 Make:- poly cab, Finolex, V-guard or similar approved makes. | — | — | — | 7,950 | |
| — | 1.00 | — | — | ||
| Supply of GM non return valve heavy duty ISI Marked 50 MM dia, 4 inch long | — | — | — | 2,903.65 | |
| — | 1.00 | — | — | ||
| Supply of GM sluice valve 50 mm dia heavy duty with ISI mark | — | — | — | 2,844.65 | |
| — | 1.00 | — | — | ||
| Supply and fixing of all misc items like 1) MS bore clamp of 12 mm thickness suitable for 50 MM GI pipe =2 Nos 2) GI Bend -50 MM dia =1 No. 3) Bore Cover | — | — | — | 1,363 | |
| — | 1.00 | — | — | ||
| Erection, Testing and commissioning of submersible pump set, control panel including transportation of Pumping machinery complete. | — | — | — | 8,297 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
JPOforcablecuttings1.pdf
ATTACHMENT
Letter of credit
ATTACHMENT
FormatofCertificationforCredentialsAFFIDAVIT.pdf AFFIDAVIT
ATTACHMENT
NEFTForm.pdf
ATTACHMENT
GCCCorrectionslip1to10.pdf
ATTACHMENT
GCC Works Apr 22
ATTACHMENT
Tender Booklet
ATTACHMENT
2018_CE-I_CT_9Date04_06_2018LOCLETTEROFCREDIT.pdf
ATTACHMENT
FormatofCertificationforCredentialsAFFIDAVIT.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22_.pdf
ATTACHMENT
TENDERBOOKLET-Type-II16unitsatVonobhanagarcolony.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .