REPAIR ROOFING FLOORING, JOINERY, PLUMBING WORKS AND OTHER MISC BR WORKS AND INTERNAL ELECTRIFICATION WORKS IN NCC OTA AND REPAIR / REPLACEMENT OF PLUMBING, TILING, JOINERY AND OTHER B/R MISC WORKS AT CERTAIN UNIT UNDER GE KAMPTEE

Amount

Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and as directed.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet (AZ150 ISI Mark) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type bolt complete all as per manufacturer instructions complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150 ISI Mark) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J-type bolt/L-type bolt complete all as specified and directed.

Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed.

M&L for Framed work such as grills, gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specifed and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cmwidth or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed.

Providing and fiixing ceiling at all heights with GRG (Glass fibre reinforced gypsum) false ceiling tilesof size 595x 595mm of approved texture design and patterns having moisture content less than 2% humidity resisitance of 995 NRCO. 5 to .75 as per IS 8225: 1970 and light reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanised iron sectio of .33mm thick (galvanised @ 120gms per sqm including both sides per sqm including both side comprising of main T runner of size 15x 32 mm of length 3000mm cross T of size length 600 mm to form gride Gavanised @80 Gm per sqm I.e 50 mm long and 8mm outer diameter M -6 fasteners 6mm dia fully galvanised hanger rod upto 1000mm long L shaped level adjuster of size 85x25x2 mm galvanised iron perimeter wall angle of size 24x24x.4 mm of length 3000mm to be fixed on partition wall with the help of plastic rawl plugs at 450 mm center to center 40 mm long dry wall wood screws caried out as per specification and drawing all as directed by engr in charge with semi perforated 12 mm thick micro trangular edge GRG false ceiling tiles complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilatiate demolition) complete all as specified and as directed.

M&L for providing precast RCC cover slabs 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:4 as in landings, (for man holes etc) chullah hoods, chajjas , water roughs, mangers, shelves and similar articles with plain faces complete all as specified and directed

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 with liquid WPC on external walls finished even and smooth (without using extra cement) complete all as specified and directed.(note : WPC shall be measured and paid seprately under respective item)

Supply only liquid water proofing compound complete all as specified and directed.

M&L Rendering 5 mm thick on fair faces of brick work or concrete surfaces with CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of Chalk whiting all as specified and directed.

M&L for applying two coats of OBD over a coat of chalk whiting on new wall surfaces including preperation of surfaces complete all as specified and directed.

M&L for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

Materials and labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles exc 0.42 sqm and n.exc 1.00 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed.

Materials and labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles exc 0.42 sqm and n.exc 1.00 Sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of cement mortar (1:6) complete.

All as item No 29 above but as in skirting with 10mm backing in cement mortar 1:4 complete.

Material & labour for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete, all as specified and directed.

M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry , mixed with pigment to match the shade of the slab incl rubbing and polishing, laid over and including 10mm thick screed in cement mortar 1:4 incl taking down old one, complete all as specified and directed

S&F pre-polished granite 20mm thick fixed on platform/shelves/steps/cill over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area n. exc 1.50 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as spd and directed.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete Gde Fe 410-W (Gde-E- 250)quality-A,complete all as specified and as directed.

M & L for 1mm thick mild steel , plain, black sheet in wall cladding , steel gates andd similar work , cut to size , holes punched , including round headed screws, clout nails of rivets and fixed to wood or steel framinf with plain 40 mm lap joints with riveted or welded seams , including bending or turning up, mitred angles, etc reqd complete all as spd and directed.

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Material & labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F powder coating aluminium frame for doors, windows , ventilators with one or more rebates incl joining cleat for fixing etc. complete all as spd. (thickness or powder coating not less than 50 micron) complete all as specified and as directed.

S&F powder coating aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing,02 Nos handles, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

S&F powder coated aluminium ventilator louvers type section aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc louvers after open use in ventilator in order to allow air or light in while keeping sun in or moisture out complete all as specified and directed.(thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

S&F 5.5 mm thick glass, ordinary quality and glazing with oil putty/wooden beads in square exceeding 0.5 square metre in each pane complete all as specified and directed.

Built in steel cup board shutter made out mild steel, plain back sheet 1 mm thick as in shutter and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing.

S&F toughned glass 12 mm thick as in hinged doors, partiotion automatic doors and similar work incl cutting to shape ,drilling holes reqd complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Supply & fixing 150mm Aluminium barrel tower bolts, fixed complete all as specified and as directed

Supply & fixing in repairs 150mm Aluminium barrel tower bolts, fixed complete all as specified and as directed

Supply & fixing in repairs 125 mm Aluminium pressed handles fixed complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel/aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete.

S&F 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete.

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.

M&L for providing 75 mm th cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) as in sub base complete all as specified and directed.

M&L Pre polished Chequered tiles rubber pressed glossy finish (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 20mm screed bedding in cement mortar (1:4) complete all as specified

S&F in repairs 20mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection andcomplete all as specified

Dismantling water tank of capacity exc 250 ltr & not exc 500 ltrs and removing to store of any description complete all as specified and directed

Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed

Dismantling water tank of capacity exc 1000 ltr & not exc 2000 ltrs and removing to store of any description complete all as specified and directed

S & F 500 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

S & F 1000 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

S & F 2000 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

M & L Gun-metal, globe or gate valves, 15 mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

M & L Gun-metal, globe or gate valves, 20 mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

S & F in repair health faucet of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm bore all complete all as specified and directed. (Make: Prayag cat no BEA-40.

S&F in repairs CP soap dish with glass complete all accessories (Make : PRAYAG Cat part No BA - 15 G or equivalent of approved make) ,

S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. Make : Prayag Cat Part No 551 eqavanent

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.

S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make prayag cat No BEA 44 or equivalent

Supply & fixed in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device,complete all as specified and directed.

S & F in repairs vitreous china white squatting pan "Orissa Pattern" size 580x440mm, with integrated foot rest (excluding flushing sistern, flush pipe etc) including making good to floor complete, all as specified and directed.

S&f in repair Vitreous China wash basin, white,with padestal flat back, size 540x400mm excluding ditto but including brackets and padestal etc all as specified and directed.

S & F Wash basin oval type (56 x 41cm) complete all as spd and directed(Make : Hindware,CERA, Prayag)

S&F in repair Vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader ,connections to flushing pipe complete all as specified and directed

Supply only 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified. Make : Prayag Cat No 501 0r equivalent.

S&F in repair bib tap 15 mm dia cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed complete all as specified

S&F in repair pillar cock swan neck 15 mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. Make :Prayag cat No 7814 or equvalent

Supply and fix in repair pillar cock, Swan neck central hole basin mixer with hot/cold connection without pop up waste system complete all as specified and directed. Make:- Prayag Cat part No 8750 or equivalent in Hindware / Cera.

S&F in repair Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,fancy type screwed for iron pipe and fixed, complete all as specified and directed.

S & F in repairs chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe complete all as specified and as directed.

S&F in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head,complete all as specified and directed. Make:- Jaquar cat part No FUS-29281 or equivalent.

S & F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specified and as directed.

S&F in repairs stop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and as directed.

S&F in repairs 2-way bib cock with flange 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and directed. Make:- Prayag Cat part No 7711 or equivalent.

S&F in repairs flush pipe of polythene of low or high density 32 mm PVC complete all as specified and directed.

S &F Tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed.

S&F in repairs towel rack complete all as specidied and directed. Make- Essco by Jaquar (Cat No:AEC-1181A) or equivalent

S&F in repair PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed.

M & L cutting grooves in brick wall, 75 mm wide and 65 mm deep and shapping horizontal face of groove with cement mortar 1:3, complete all as specified and as directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in cement mortar 1:3. complete all as specified and as directed.

M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

S & F providing fanhooks for ceiling fans with suitable suspender complete all as spd and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm

S&F stack clamps made out of 25mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe.

M&L Stack clamps out of 50mm by 5mm flat iron and 10mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof for 75mm pipe

Dismantling boarding, any description, fixed in any position with Screw ,complete all as specified and directed.

S&F 6 mm thick teak wood lipping on block board fixed with nails complete all as spd & directed.

S& F in repair 18 mm thick Alstone wood Polymer Composive Board ( WPC) in cupboard shutter and like with decorative on both side design fixed by drilling screws and brackets all as specified all as directed.

Welding to existing steel door/gate, window in repairs n.exc 2.5 cm in length thickness of meteal exce 6mm but n.exc 9mm complete all as specified and as directed.

Welding to existing steel window in repairs exc 2.5 cm in length but n.exc 5 cm in length thicknes of metal exce 6mm but n.exc 9mm complete all as specified and as directed.

S&F in repair 15 mm bore ball valves. high pressure of PTMT with apoxy coated aluminum rod & heigh dencity plastic ball screwed for iron pipe and fixed. (Minum wt 15mm-142 gms/20mm-210g complete all as specified and directed.) Make : Prayag

S&F in repair 20 mm bore ball valves. high pressure of PTMT with apoxy coated aluminum rod & heigh dencity plastic ball screwed for iron pipe and fixed. (Minum wt 20mm-210g complete all as specified and directed. Make : Prayag

Taking down existing door setting a side and change the double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and refixing of aluminium door in same position complete all as spd and directed.

M&L for 50 mm thick sand filling under floor or in foundation including watering and consolidation etc complete all as directed.

M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade etc complete all as directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching, bed plates and the similar including, weathering, slightly rounded or chamfered edges and throating complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed.

S&F as in repair stainless steel kitchen plate rack of size 80x55x20 cm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed. Make : Nirali/Prayag

S & F waste fitting, 32 mm/40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut compete.

S&F in repairs 40/32mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

S&F in repair CP grating doom with waste hole of size 125mm dia complete all as specifed and directed complete all as specifed and directed.

S & F in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

S&F in repair PVC (SWR) Bends any radius for 110 mm bore complete all as specified and directed

S&F in repair PVC (SWR) Bends any radius for 75 mm bore complete all as specified and directed

M & L for PCC 1:2:4, Type B0 (using 12.5 mm graded stone aggregate) 25 mm thick as in sunken floor complete all as specified and directed.

M&L for PCC type E2 1:5:10 (40 mm graded aggreate) in foundation, filling and mass concrete complete all as specified and directed

Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K Supremo or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. applying SmartCare Damp Block 2K Suprema in two coat 2 kg/sqmt consumption, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing , etc, complete as per manufacturers specifications.

S&F Butt hinges medium weight cold rolled stainless / Mild steel 100mm size complete all as spd and directed.

M&L 50mm bore GI tubing medium grade laid on sunken floor as on Spot Pipe complete all as specified and directed by Engineer-in-charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed

S&F in repair for curtain rails, mild steel, chromium plated with fixing brackets,stops,rollers etc complete all as specified and directed

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles n exc. 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or colored cement oto match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including border tiles) complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles n exc. 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or colored cement to match over 10mm thick screed bed or bedding layer in cement mortar 1:3 (including border tiles) complete all as specified and as directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes complete all as specified and directed

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ceiling or surface of wall/ceiling as directed including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

As per item No 145 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed

As per item No 145 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed

As per item No 145 above but One 3 pin 5 amps socket out let point on independent board complete all as specified and directed

As per item No 145 above but One bell/buzzer point controlled by one bell push complete all as specified and directed

As per item No 145 above but for two point controlled by two, two way switches complete all as specified and directed

All as per item Sl No 145 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

As per item No 152 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed

Supply and fix ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed Make : Havells, Legrand, Crabtree

S&F Bell ding dong, AC 230 volts, single phase complete all as specified and directed

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting. complete all as specified and directed

Supply and fix Modular switch one way 6A, 1 module complete all as specified and directed Make : Havells, Legrand, Crabtree

Supply and fix Modular switch one way 16A, 1 module complete all as specified and directed Make : Havells, Legrand, Crabtree

Supply and fix Modular bell push 6A, 1 module complete all as specified and directed Make :Havells, Legrand, Crabtree

Supply and fix Modular Socket 6A 2/3 pin combined 2 module complete all as specified and directed Make : Havells, Legrand, Crabtree

Supply & Fix Modular Socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and directed Make : Havells, Legrand, Crabtree

Supply and fix Modular Fan step regulator,120 watt 2 module complete all as specified and directed Make : Havells, Legrand, Crabtree

Supply & Fix modular motor starter 20A , 2 module for AC complete all as specified and directed.

Supply and Fix Highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed

Refixing of LED light fitting any type as directed complete all as specified and directed

Supply & fix light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed

Supply & fix fittings with surface mount LED down lighters 12 W including driver with rated voltage 240 V , 50 Hz, complete all as specified and directed

Supply and fix Energy efficient surface mounted 2'X2' grid Ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse complete all as specified and directed

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 1000 lumen prewired, complete all as specified and directed

Supply and fix building security light LED 25 W with Lumen O/P 2500 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as specified and directed

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door. complete all as specified and directed

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar flush /surface mounting double door. complete all as specified and directed

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and as directed

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and as directed

Supply and fix MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and as directed

Supply and fix MCB triple pole and neutral 415 volt 40 to 100 amps 10 KA. complete all as specified and as directed

Taking down carefully geyser/water heater of any Make type & size including disconnecting water connection plug water flow, for repairs and refixing the same to original position after repairs including decaling the inner tank and tubing and marking of MES No with synthetic enamel paint, black colour complete all as specified and as directed. Note:- (i) Spares required for replacement shall be measured and paid separately as Supply and Fix under respective items of this schedule. (ii) Quoted rates shall be deemed to be included for any GI Fitting, screwing, required during connecting/ disconnecting water supply.

Supply and Fix thermostat any type, suitable for geyser, ISI mark complete all as specified and as directed.

Taking down carefully Solar heater water tank of any Make, type & size , disconnecting water connection inlet and out let of tank and plug water flow, for repairs,descaling inner tank , replacement of heating elements thermostat, anti anode, refilling of distilled water as required including painting of water tank and refixing the same to original position after repairs. Marking of MES No all as specified and as directed.(Note:- Cost of heating element with thermostat, inlet outlet adaptor, air release valve, toughened glass will be paid in relevant items)

Taking down carefully Solar collector panel before T/D disconnecting water connection inlet and out let of collector plate plug water flow, descaling,with dilute acid , including replacement of unserviceable collector inlet and outlet flange with rubber gasket, refilling of distilled water as required and refixing the same to original position after repairs. all as specified and as directed

Supply and Fix Electric heater, Elements any type any size with thermostat 2 KW as per sample, all as specified and as directed

Supply and Fix Inlet adaptor complete all as specified and as directed

Supply and Fix outlet adaptor complete all as specified and as directed

Supply and Fix AIR release Valve complete all as specified and as directed

Supply and Fix solar Evacuated glass tube complete all as specified and as directed

Supply and fix Delite hard water collector panel(tube type), suitable for 200 LPD complete all as specified and as directed

Supply and fix Delite hard water tank, including heating element suitable for 200 LPD complete all as specified and as directed

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 59,389.00]

SHIV SHANKAR MISHRA (BID ID -3144471)

M/s T.S.JOHAR (BID ID -3135971)

DE PRETTY AND CO (BID ID -3137333)